Power Transmission

5/8" triplex plate wheel sprocket, ideal for light or medium drives that require the simultaneous rotation of three chains with reliability and service life.

⚡ Sold by rib: make sure you add the number of ribs required to the quantity (e.g. Ribs = 4 - Quantity = 2 you will receive 2 belts of 4 ribs).
The Poly‑V belt, section J is a multi-rib belt designed to transmit power efficiently on grooved pulleys. It is flexible, compact and suitable for transmissions with several parallel ribs.

The pre-bored aluminium pulley dia. 60 mm, 2 grooves, section A is a lightweight and strong component, designed for double V-belt drives. The 19 mm bore is fitted with a keyway for the coupling key, allowing secure and immediate mounting on the shaft.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "A", 1 groove is a pulley designed for single V-belt drives with the option of fitting a specific taper bush (sold separately). This allows the pulley to be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "A", 2 grooves is a cast iron pulley designed for double V-belt drives. Thanks to the option of fitting a specific taper bush (sold separately), it can be coupled directly to the motor shaft without having to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "A", 4 grooves is a cast iron pulley designed for quadruple V-belt drives. Thanks to the option of fitting a specific taper bush (sold separately), it can be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "A", 5 grooves is a cast iron pulley designed for quintuple V-belt drives. Thanks to the option of fitting a specific taper bush (sold separately), it can be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "B", 1 groove is a cast iron pulley designed for single V-belt drives with the option of fitting a specific taper bush (sold separately). This allows the pulley to be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "B", 2 grooves is a cast iron pulley designed for double V-belt drives. A specific taper bush (sold separately) can be fitted, allowing the pulley to be coupled directly to the motor shaft without having to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "B", 3 grooves is a cast iron pulley designed for triple V-belt drives. Thanks to the option of fitting a specific taper bush (sold separately), it can be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "B", 4 grooves is a cast iron pulley designed for quadruple V-belt drives. Thanks to the option of fitting a specific taper bush (sold separately), it can be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The pulley for taper bush section "B", 5 grooves is a cast iron pulley designed for quintuple V-belt drives. Thanks to the option of fitting a specific taper bush (sold separately), it can be coupled directly to the motor shaft without the need to machine or bore the pulley.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The SIT-LOCK® friction locking assemblies are devices designed for the quick and secure fixing of pulleys and other components onto the motor shaft, with no need for keys or drilling. Thanks to the SIT-LOCK® system, they ensure reliable torque transmission through controlled friction.

⚠️ Note: the photo is for illustration purposes only; the actual product may differ slightly in appearance.

The solid aluminium pulleys section "A" are lightweight and strong components, designed for V-belt drives. Ideal for applications where weight reduction without compromising strength is required, they are available in various diameters to suit different mechanical requirements.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The solid aluminium pulleys section "B" are lightweight and strong components, designed for V-belt drives. Ideal for applications where weight reduction without compromising strength is required, they are available in various diameters to suit different mechanical requirements.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

The solid aluminium pulleys section "Z" are lightweight and strong components, designed for V-belt drives. Ideal for applications where weight reduction without compromising strength is required, they are available in various diameters to suit different mechanical requirements.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.

1" duplex sprocket, ideal for medium drives that require the simultaneous rotation of two chains with greater stability and service life.

1" simplex sprocket, ideal for medium drives that require the rotation of a single chain with reliability and service life.

1.1/2" duplex sprocket, ideal for drives that require the simultaneous rotation of two chains with greater stability and reliability.

1.1/4" simplex sprocket, designed for medium drives that require reliability and the rotation of a single chain.

1.3/4" duplex sprocket, ideal for medium-capacity drives that require the simultaneous rotation of two chains with greater stability and service life.

1.3/4" simplex sprocket, ideal for medium-capacity drives that require the rotation of a single chain with reliability and service life.

1/2" duplex sprocket, ideal for light drives that require the simultaneous rotation of two chains with greater stability and service life.

1/2" simplex sprocket, ideal for light drives that require the rotation of a single chain with reliability and service life.

1/2" triplex sprocket, ideal for light drives that require the simultaneous rotation of three chains with greater stability and service life.

Sprocket 3/4" duplex, ideal for light or medium drives that require the simultaneous rotation of two chains with greater stability and durability.

3/4" simplex sprocket, ideal for light or medium drives that require the rotation of a single chain with reliability and service life.

3/4" triplex sprocket, ideal for drives that require the simultaneous rotation of three chains, ensuring stability and service life.

3/8" duplex sprocket, ideal for very light drives that require the simultaneous rotation of two chains with greater stability and service life.

3/8" simplex sprocket, ideal for very light drives that require the rotation of a single chain with reliability and service life.

3/8" triplex sprocket, ideal for very light drives that require the simultaneous rotation of three chains with greater stability and service life.

5/8" duplex sprocket, ideal for light or medium drives that require the simultaneous rotation of two chains with greater stability and service life.

5/8" simplex sprocket, ideal for light or medium drives that require the rotation of a single chain with reliability and service life.

5/8" triplex sprocket, ideal for light or medium drives that require the simultaneous rotation of three chains with greater stability and service life.

The 1008 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 1108 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 1210 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 1610 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 2012 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 2517 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 3020 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 3535 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 7060 taper bush is a metal component designed to be inserted into taper bush pulleys, allowing the desired motor shaft bore to be obtained without having to turn or drill the pulley. It is sold separately and fits compatible pulleys perfectly.
⚠️ Note: the photo is for illustration only; the actual product may differ slightly in appearance.

The 9560 taper bush is a metal component designed to be fitted into taper bush pulleys, giving you the required bore for the motor shaft without having to turn or drill the pulley. It is sold separately and pairs perfectly with compatible pulleys.
⚠️ Note: the photo is for illustration purposes only; the actual product may differ slightly in appearance.