Milwaukee concrete drill bits with TCT tungsten carbide tip, diameters from 4 to 14 mm: for use with hammer action and in rotation on concrete, aerated concrete, masonry, slate and granite.
Drill Bits
Drill Bits
Milwaukee drill bits for metal, wood, concrete and masonry, plus step drill bits for sheet metal and pipes. You will find HSS-G and cobalt bits for stainless steel, the 19-piece case, multi-material bits, and bits for concrete and for wood, each in its own sizes. Below the products there is a guide to choosing the bit by material.
There are 12 products.
Milwaukee HSS-G Co cobalt drill bits DIN 338, from 1 to 13 mm: high-speed steel with 5 per cent cobalt, QUAD EDGE 135° point with four cutting edges, three-flat shank from 5 mm. For stainless and alloy steels.
Milwaukee THUNDERWEB HSS-G DIN 338 metal drill bits, from 1 to 13 mm: tapered core that thickens towards the shank, 135° cross-ground point, flutes that quickly clear the swarf and polished finish.
Milwaukee multi-material drill bits with a TCT carbide tip, diameters from 3 to 12 mm and lengths up to 400 mm, hex shank up to 260 mm for impact drivers. They drill concrete, brick, wood, PVC and thin sheet metal.
Milwaukee RED COBALT case with 19 metal drill bits in HSS-G high-speed steel with cobalt (5 per cent), DIN 338, diameters from 1 to 10 mm in 0.5 mm steps. Item No. 4932499764.
Milwaukee SHOCKWAVE Impact Duty step drill, item no. 48899265: diameters from 4 to 30 mm, 1/4" hex shank with SHOCKZONE, TiAlN coating and RAPID STRIKE point. For impact drivers and drill drivers.
Milwaukee fencing staples item no. 4932480358 for the M18 FFUS cordless stapler: 40 mm long, 4 mm hot-dip galvanised steel wire, divergent points, pack of 960 pieces. For metal fencing fixed to wood.
Milwaukee step drill, item no. 48899320: nine holes from 4 to 20 mm in 2 mm steps, maximum thickness 4 mm, Rapid Strike point and 8 mm three-flat shank. For sheet metal, sections, tubes, stainless steel and plastic.
Milwaukee step drill, item no. 48899340, with 17 steps for holes from 6 to 40.5 mm, 10 mm shank and 90 mm length. It works on ferrous and non-ferrous metals, stainless steel and plastic up to 4 mm thick.
Milwaukee step drill, item no. 48899321 for PG7 to PG21 holes, from 12.5 to 28.3 mm: nine steps, 10 mm three-flat shank, length 68 mm, maximum thickness 4 mm. For cable glands in electrical panels and cabinets.
Milwaukee Shockwave Red Hex metal drill bits in HSS-G with titanium nitride coating and 1/4" hex shank for impact drivers. 135° tip with four cutting edges, diameters from 2 to 13 mm among the variants.
Milwaukee lip and spur (brad point) wood drill bits to DIN 7487 E, diameters from 3 to 20 mm. Suitable for hardboard, plywood, chipboard and all natural woods, both hard and soft.
