Dremel 670 mini circular saw, item no. 26150670JD: attachment for Dremel multi-tools with 546 blade of 31.8 mm, maximum cutting depth of 6.35 mm at 90° and transparent housing, for straight cuts in wood and laminates.
Dremel Accessories
Dremel Accessories
Accessories for Dremel rotary multi-tools: engraving and high-speed cutters, diamond points, abrasive grinding stones, brushes, cutting and polishing discs, mandrels and a kit for sharpening chainsaw chains. Every item carries its Dremel code. Below the products you will find a guide to choosing the right accessory.
There are 89 products.
Dremel 723 multi-purpose accessory set, item no. 2615S723JA: 100 genuine Dremel accessories, including EZ SpeedClic quick-change accessories, in a case. For wood, plastic, soft metals, copper, sheet steel and plywood.
Dremel 4486 keyless chuck, item no. 2615448632: locks accessories with a 0.8 to 3.2 mm shank without a collet or wrench, up to 35,000 rpm. It can also be used with the 225 flexible shaft and the 575 right-angle attachment.
Dremel 421 solid polishing compound, item no. 2615042132: to be applied to felt or cloth polishing wheels to remove dull oxidation and small imperfections from metals and plastics. Maximum speed 20,000 rpm.
Dremel 442 carbon steel cup brush, item no. 26150442JA: working diameter 13 mm, 3.2 mm shank, up to 15,000 rpm, 2 pieces. For cleaning metal and removing rust and corrosion, leaving a matt finish.
Dremel 443 carbon steel pen brush, item no. 26150443JA: working diameter 3.2 mm, 3.2 mm shank, length 48 mm, up to 15,000 rpm, 3 pieces. For cleaning metal and removing rust.
Dremel 453 grinding stone for sharpening chainsaw chains, item no. 26150453JA: 4 mm aluminium oxide cylinder, 3.2 mm shank, up to 30,000 rpm. It is the smallest in the range and does not require spacers.
Dremel 455 grinding stone for sharpening chainsaw chains, item no. 26150455JA: 5.6 mm aluminium oxide cylinder, 3.2 mm shank, up to 30,000 rpm. It is the largest in the range and is used with both spacers.
Dremel 462 rubber polishing point, item no. 26150462JA: working diameter 6.4 mm, 2.4 mm shank, up to 30,000 rpm. For removing scratches and polishing metal surfaces, as well as marble, granite and ceramic.
Dremel 520 polishing pad, item no. 2615052065: felt disc already impregnated with silicon carbide abrasive and lubricant, diameter 13.2 mm, 3.2 mm shank, up to 20,000 rpm. For polishing metals without compound.
Dremel 530 radial brush, item no. 26150530JA, pack of 2: stainless steel bristles, working diameter 19 mm, 3.2 mm shank, up to 15,000 rpm. For cleaning and finishing stainless steel, aluminium, silver and pewter.
Dremel 531 cup brush, item no. 26150531JA, pack of 2: stainless steel bristles, working diameter 12.7 mm, 3.2 mm shank, up to 15,000 rpm. For cleaning, deburring and finishing stainless steel, aluminium, silver and pewter.
Dremel 532 paintbrush-style brush, item no. 26150532JA, pack of 3: stainless steel bristles, working diameter 3.2 mm, 3.2 mm shank, up to 15,000 rpm. For cleaning and finishing white metals, even in the tightest spots.
Dremel 535 brass radial brush, item no. 26150535JA, pack of 2: working diameter 19 mm, 3.2 mm shank, up to 15,000 rpm. It does not produce sparks and is suited to cleaning and polishing soft metals such as gold, bronze, copper and brass.
Dremel 540 cutting discs, item no. 2615054032, pack of 5: diameter 32 mm, thickness 1 mm, cutting depth up to 14 mm, up to 35,000 rpm. For straight cuts in metal, to be fitted on the Dremel 402 screw mandrel.
Dremel 542 carbide cutting and shaping disc, item no. 2615054265: diameter 25.4 mm, 3.2 mm shank, working depth up to 9 mm, up to 35,000 rpm. For cutting and shaping wood, laminates and panels; not suitable for metals.
Dremel 7103 diamond ball point, item no. 26157103JA, pack of 2: working diameter 2 mm, 3.2 mm shank, up to 25,000 rpm. For fine engraving on wood, glass, ceramic, jade, semi-precious stones and hardened steel.
Dremel 7120 diamond point, item no. 26157120AC, oval disc shaped with a coating of diamond particles, for detail work on wood, jade, ceramic, glass, hardened steel and other hard materials. Fits the multi-tool without a mandrel.
Dremel 7134 flat-head diamond point, item no. 26157134JA, sold as a pair: 2 mm diameter head and 3.2 mm shank, usable up to 25,000 rpm. For precision engraving, cutting, touching up and finishing on hard materials.
Dremel 8153 aluminium oxide cylindrical grinding stone, item no. 26158153JA, pack of 3: working diameter 4.8 mm, 3.2 mm shank, up to 25,000 rpm. For sharpening, deburring and grinding metals, including stainless steel.
Dremel 8193 aluminium oxide grinding stone, item no. 26158193JA: cylindrical shape with a working diameter of 15.9 mm, 3.2 mm shank, pack of 2. Suited to sharpening, deburring and grinding of metals, stainless steel included.
Dremel 8215 aluminium oxide grinding stone, item no. 2615821532: working diameter 25.4 mm, 3.2 mm shank, maximum 20,000 rpm. For sharpening, deburring and general grinding, including stainless steel.
Dremel 84922 silicon carbide conical grinding stone, item no. 26154922JA: working diameter 4.8 mm, 3.2 mm shank, up to 25,000 rpm, 3 pieces. For sharpening, deburring, grinding and engraving glass, ceramic and stone.
Dremel 85422 silicon carbide grinding stone, item no. 2615542232: working diameter 19.8 mm, 3.2 mm shank. For sharpening, deburring, grinding and engraving stone, glass, ceramic, porcelain and non-ferrous metals.
Dremel 932 aluminium oxide grinding stone: cylindrical shape, working diameter 9.5 mm, 3.2 mm shank, maximum 25,000 rpm. For sharpening, deburring and grinding of metals, stainless steel included.
Dremel 953 aluminium oxide grinding stones, item no. 26150953JA: conical shape, working diameter 6.4 mm, 3.2 mm shank, maximum 25,000 rpm, pack of 3. For sharpening, deburring and grinding metals and stainless steel.
Dremel 9924 carbide engraving bits, item 26159924JA, pack of 3 pieces for the Dremel 290 engraver: from fine lines to deep grooves on glass, ceramic, wood, plastic and leather.
Dremel 105 engraving cutter, item 26150105JA, in high-speed steel with a 0.8 mm ball head, 3.2 mm shank and a maximum of 35,000 rpm. Pack of 3 pieces for precision carving and engraving.
Dremel 106 engraving cutter, item 26150106JA, in high-speed steel with a 1.6 mm ball head, 3.2 mm shank and a maximum of 35,000 rpm. Each pack contains 3 cutters, suitable for precise carving and engraving.
Dremel 107 engraving cutter, item 26150107JA, in high-speed steel with a 2.4 mm ball head, 3.2 mm shank and a maximum of 35,000 rpm. Pack of 3 pieces for carving, shaping and inlay work.
Dremel 108 engraving cutter, item 26150108JA, in high-speed steel with a 0.8 mm cylindrical head, 3.2 mm shank and a maximum of 35,000 rpm. Pack of 3 pieces for extremely precise carving.
Dremel 110 engraving cutter, item 26150110JA, in a pack of 3: 1.9 mm cylindrical head in high-speed steel, 3.2 mm shank, up to 35,000 rpm. For precision carving and engraving with the multi-tool.
Dremel 111 engraving cutter, item 26150111JA, pack of 3: the smallest long cylindrical head in the range, 0.8 mm, in high-speed steel, 3.2 mm shank, up to 35,000 rpm. For extremely precise engraving.
Dremel 113 engraving cutter, item 26150113JA, pack of 3: 1.6 mm long cylindrical head in high-speed steel, 3.2 mm shank, up to 35,000 rpm. For precise carving, including on curved surfaces.
Dremel 114 high-speed cutter, item 26150114JA, pack of 2: 7.8 mm ball head in high-speed steel, 3.2 mm shank, up to 30,000 rpm. For shaping and hollowing out wood, plastic and soft metals.
Dremel 115 high-speed cutter, item 26150115JA, pack of 2: 7.8 mm cylindrical head in high-speed steel, 3.2 mm shank, up to 30,000 rpm. For removing a lot of material and for cutting grooves and V-cuts.
Dremel 1453 chainsaw chain sharpening kit, item 26151453JB: angle guide, adjustment gauge, 4 abrasive wheels and spacers. It fits on the Dremel multi-tool and sharpens chains of different sizes.
Dremel 192 high-speed cutter, item 26150192JA, pack of 2: 4.8 mm pear-shaped head in high-speed steel, 3.2 mm shank, up to 30,000 rpm. For rounded edges, carving and work on curved surfaces.
Dremel 193 high-speed cutter, item 26150193JA, pack of 2: 2.0 mm cylindrical head in high-speed steel, 3.2 mm shank, up to 30,000 rpm. For detailed shaping of wood, plastic and soft metals.
Dremel 194 high-speed cutter, item 26150194JA, pack of 2: 3.2 mm cylindrical head in high-speed steel, 3.2 mm shank, up to 30,000 rpm. For shaping, grooving and carving wood, plastic and soft metals.
