Adjustable injector 3/8" for Lavor Wash pressure washer, item no. 21.0600.12, size 1.2 mm: it draws in the detergent and lets you dose the amount in the jet. Compatibility to be checked on your own model.
Accessories & Spare Parts for Pressure Washers
Accessories & Spare Parts for Pressure Washers
Spare parts and accessories for Lavor Wash pressure washers: water and oil seals, anti-extrusion rings, O-rings, springs, seal kits, type B quick couplings, lances, guns, wash brushes, nozzles and drain cleaning probes. Many parts show the Lavor Wash part code. Below the products you will find a guide to ordering the right part.
There are 191 products.
Pressure washer gun AL55 by Lavor Wash for hot water, 350 bar, 160 °C, 3/8" male connection, item no. 3.700.0030. Professional gun for intensive use in the workshop.
Lavor Wash anti-extrusion ring for 15x24x5 mm seals, item no. 4.608.0106: it supports the gasket and prevents it from being crushed when the pressure rises, extending the life of the seal.
Anti-extrusion ring 12x18x1 mm for Partner D.12 Lavor Wash, item no. 4.008.0695: a spare part that protects the O-Ring from being crushed under pressure and preserves its seal.
Lavor Wash anti-extrusion ring 14x22x1.3 mm, item no. 4.008.0347: a support ring to be paired with the sealing gasket, a spare part for pressure washer maintenance. Compatibility to be verified on your own model.
Lavor Wash anti-extrusion ring, dimensions 8x11x1.5 mm, item no. 4.608.0326: a spare part supporting the gasket, useful against crushing under pressure and to make the seal last longer.
Lavor Wash anti-extrusion ring 15x25x2 mm, item no. 4.008.0109: a support element that sits alongside the gasket and limits its deformation under pressure. Compatibility to be verified on your own model.
Lavor Wash ball quick coupling with 1/2" female thread, part B only, item no. 26.2010.30: spare part to replace the half coupling and restore the quick connection.
Lavor Wash ball quick coupling, 3/8" female thread, part B only, item no. 26.2030.00: spare part to restore the secure connection between hose and accessories.
Lavor Wash ball quick coupling, 3/8" female thread, part B only, item no. 26.2010.10: spare half coupling to connect and disconnect accessories quickly.
Two-pole rotary switch 16 A with 0-1 positions and an 11.5 mm long shaft, item no. 3.401.0202, a Lavor Wash spare part for the power-on control; to be verified on your own model.
Lavor Wash external nozzle for flex hose coupling model '04, item no. 4.208.0068: a spare part for the flexible hose connection. Compatibility to be verified on your own model.
Handle for GB head, item no. 4.208.0038. Lavor Wash spare part for pressure washers, useful for carrying and moving the machine: compatibility to be checked against your own model.
Lavor Wash internal nozzle for stainless steel drum, item no. 3.752.0044: a spare part to replace a deformed or worn nozzle. Compatibility to be verified on your own model.
Fan nozzle for sprayer, item no. 162015002, size 03 with 110° spray angle and 1.1 mm orifice. Designed to cover large surfaces with the jet in a few passes.
Lavor Wash box and micro unit assembly with 2x1.5 cable for brass head mod. '99, item no. 5.609.0246: a complete spare part to replace the micro unit in one piece.
Brass shim for the spring of compensating valve model '03 by Lavor Wash, item no. 4.006.0269, in brass. Compatibility to be checked against your own model.
Small brush with polyester bristles, diameter 30 mm, ref. Davy 104211130, item no. 3.754.0031, Lavor Wash brand. Compatibility and use to be checked against your own model.
Lavor Wash bush item no. 4.606.0069: outer diameter 31 mm, inner diameter 21.5 mm, length 20 mm, with OR2 machining for the O-Ring. Compatibility to be verified on your own model.
Lavor Wash spare part in stainless steel, diameter 2.5 and length 133, reference G2/B4+PR.L685, item no. 3.099.0881. Function and compatibility to be verified on your own model.
Stainless steel spring for Lavor Wash check valve, OD 4.5/6, length 7 mm, wire 0.3 mm, item no. 4.007.0014. Compatibility to be checked against your own model.
Complete by-pass kit for L3 valve, TS version, item no. 6.005.0638, by Lavor Wash. Spare part for the valve unit of the pressure washer; compatibility with your own machine is to be checked on your own model.
Lavor Wash contactor TLR4FC, item no. 3.402.0026: electrical spare part for the remote control of loads such as motors. Coil voltage and rating to be checked against your own machine model.
1506 nozzle set with quick-connect hose barb Lavor Wash, item no. 5.612.0021: to connect and disconnect a flexible hose easily. Compatibility to be verified on your own model.
Cap for delivery valve Lavor Wash, item no. 5.009.0745, in brass with O-Ring, for model PT'03. Spare part for the valve seal; the pump type should be checked before ordering.
Lavorwash delivery valve for PT '03 pump, version for threaded caps, item no. 5.009.0744. Spare part for the delivery side of the pump, match to be checked against your own model.
Diaphragm for L3 valve Lavor Wash, item no. 4.605.0122: a spare membrane for the valve indicated, to be matched to your own model by checking the code in the spare parts list.
Diesel filter unit with nylon element for the MEK/MO/MS series, item no. 5.611.0043: a Lavor Wash spare part that retains impurities in the fuel. Compatibility to be verified on your own model.
Lavor Wash drain cleaning probe of 15 metres with nozzle, for clearing long pipes and drains with the pressure washer. Type of connection to be checked against your own model.
Lavor Wash drain cleaning probe of 6 metres with nozzle, for clearing drains and pipelines with the pressure washer. Type of connection to be checked against your own model.
Drain cleaning probe nozzle Lavorwash, item no. 4.006.0216, with 1/8" female threaded connection. Pressure washer accessory intended for cleaning pipework.
Lavor Wash drain-clearing nozzle with 1/4" gas thread, a pressure washer accessory used to clear blocked pipes. Pressure and flow rate of the machine to be matched carefully.
FKX electronic board with 230 V, 50 Hz supply, item no. 3.403.0012, Lavor Wash brand: spare part for the electronic control. Compatibility to be checked against your own model.
Lavor Wash assembly with 1/8" fitting and M7 hex head plug, item no. 5.609.0158: a spare part made up of fitting and plug. Compatibility to be verified on your own model.
Flat-section fixed lifting cable Lavor Wash, item no. 3.099.0974: a spare part to match to your own model; check the code in the machine's spare parts list before ordering.
Foam diffuser with jar Lavor Wash for pressure washers: the jar holds the detergent to be spread on the surface to be washed, useful for pre-washing cars and surfaces. Compatibility to be checked on your own model.
Head ring D15 H.4 Lavor Wash, item no. 4.008.0108: a spare part with a diameter of 15 mm and a height of 4 mm for the end section of the pump unit, to be replaced when worn.
Hobby sandblasting lance Lavor Wash, item no. 00080-02651. Accessory for using the pressure washer for light sandblasting jobs; compatibility to be checked on your own model.
Banjo hollow bolt with 3/8" G thread, ref. 180004, item no. 3.557.0222 Lavorwash. Drilled element that allows the passage of fluid and the connection of pipes.
Lavor Wash low-pressure hose item no. 4.618.0136, coiled, length 315 mm, for R.A. motor pump of the LW line. Spare part to be checked against your own model before ordering.
