90 degree rubber hose elbows for radiators, in fourteen sizes, item no. 449050. The bend avoids kinking the hose in tight spaces. If in doubt, contact us.
Hoses & Tubes
Hoses & Tubes
Hoses for water, air, fuel, food and exhaust gas, sorted by material: rubber, PVC, flexible metal and, in a separate section, PTFE, silicone and cardboard. The brands are SATI GROUP, IVG, BCR, Medifly, Spiralflex, Dalmar and FIP, almost always in several diameters. Below the products you will find a guide to choosing the hose for the fluid it has to carry.
There are 40 products.
Gardencord PVC Hose for Gardening and Building Sites by SATI. Use: Gardening, building sites and construction. Pressure: 10 bar working, 30 bar burst. The size is chosen from the variants.
Cordsteel S.E. PVC Hose with Steel Spiral for Food by SATI. Use: Delivery and suction of food liquids. Compliance: EU Reg. 10/2011 (simulants A, B, C). Dimensions selectable from the variants.
Australia Rubber Hose for Petroleum Products by IVG. Use: Delivery of diesel and oils. Temperature: from -20 to +70 °C; Pressure: 10 bar working, 30 bar burst. The size is chosen among the variants.
Amalfi LL Rubber Hose for Combustion Gas Exhaust by IVG. Use: Exhaust of combustion gases mixed with sea water. Temperature: from -30 to +100 °C. Sizes can be selected among the variants.
Flexible, lightweight Cartoflex cardboard hoses, diameters from 35 to 70 mm, item no. 7707SCT, for extracting and conveying air, fumes and dust. If you are unsure, contact us.
Cordflex Air PVC Hose for Extracting Air, Fumes and Dust by SATI. Use: Extraction of air, fumes, dust and shavings. Temperature: from -5 to +60 °C. Dimensions among the available variants.
Cordflex Oil S.E. PVC Hose for Petroleum Products by SATI. Use: Suction and delivery of petroleum products. Temperature: from -25 to +60 °C. Dimensions selectable from the variants.
Clear unreinforced crystal PVC tubes, ten sizes from 4x7 to 25x34 mm. For decanting, level gauges and low-pressure connections. If you are in doubt, ask us to confirm.
EPDM radiator hoses, up to 120 °C, sizes 13x19, 15x21, 16x24 and 19x27 mm, item no. 7765. They resist heat and coolants. If you are not sure, contact us.
Industrial EVA PVC hose with right-hand screw fitting, diameters 25x30, 32x38 and 38x44.2 mm. Series to be confirmed: the code corresponds to an air extraction hose.
Female fittings for flexible metal hoses, twelve diameters from 30 to 100 mm. They connect the hose to a male threaded connection, ensuring a tight seal. If in doubt, contact us.
Extendable flexible aluminium hoses in thirteen diameters from 100 mm upwards, item no. 0000130, for aeration, extraction and conveying of hot air. If in doubt about your choice, write to us.
Flexible metal hoses in fifteen diameters from 30 to 120 mm, for fume exhaust, extraction and passage of high-temperature hot air. If you are in doubt, ask us to confirm.
Flexible stainless steel metal hoses in ten diameters from 40 to 100 mm, for fume exhaust, extraction and hot air, resistant to corrosion and heat. If you have any doubts you can contact us.
Medifly calibrated polyether polyurethane tubing, 98 Shore A, sizes 6x4, 8x6 and 10x8 mm, from -40 to +60 °C, compliant with EU Reg. 10/2011 and FDA. Item No. PU68T171.
FIP rotary flex hose, 19 mm, rated for 25 bar pressure. For the delivery of high-pressure fluids; check compatibility before use. If in doubt about your choice, write to us.
Couplings for flexible aluminium hoses in thirteen diameters from 100 mm upwards, item no. 0011110. They connect two lengths or the hose to a grille. Ask us to confirm if in doubt.
IVG LCL spiral hose in EPDM for hot water and antifreeze liquids, from -40 to +100 °C, 4 bar working and 12 bar burst. For radiators and cooling. If you have doubts about the choice, write to us.
Cordflex N.T. PVC Hose for Food Liquids by SATI. Use: Delivery and suction of food liquids. Compliance: EU Reg. 10/2011 (simulants A, B, C) and DM 174. The size is chosen from the variants.
Male fittings for flexible metal hoses, twelve diameters from 30 to 100 mm. They connect the hose to a female threaded connection, ensuring a tight seal. To help you choose, write to us.
Cordflat L PVC Layflat Hose by SATI. Use: Delivery and discharge of water and non-corrosive fluids. Pressure: 4 bar working, 14 bar burst. Dimensions among the available variants.
Montreal 10 Rubber Hose for Water and Compressed Air by IVG. Use: Delivery of water, non-corrosive liquids and compressed air. Temperature: from -35 to +70 °C; Pressure: 10 bar working, 30 bar burst. Sizes among the available variants.
Montreal 20 Rubber Hose for Water and Compressed Air by IVG. Use: Delivery of water, non-corrosive liquids and compressed air. Temperature: from -35 to +70 °C; Pressure: 20 bar working, 60 bar burst. Dimensions selectable among the variants.
Neutral silicone tubes in sizes from 4x7 to 12x17 mm, item no. TSL0604. Flexible, for laboratories, systems and connections for air and liquids. To help you choose, you can write to us.
Niagara 40 Rubber Hose for Plaster and Fine Concrete by IVG. Use: Spraying of fine concrete, plaster and gypsum. Temperature: from -40 to +70 °C; Pressure: 40 bar working, 120 bar burst. Dimensions selectable from the variants.
Orinoco Rubber Hose for Sandblasters by IVG. Use: Blasting with sand or grit. Temperature: from -40 to +70 °C; Pressure: 10 bar working, 30 bar burst. Sizes among the available variants.
Oslo Rubber Hose for Delivery of Industrial Water and Irrigation by IVG. Use: Delivery of industrial water and irrigation. Temperature: from -25 to +70 °C; Pressure: 10 bar (Oslo 10) or 18 bar (Oslo 18) working. Dimensions selectable among the variants.
Puertorico Rubber Hose for Petroleum Products by IVG. Use: Delivery and suction of diesel and oils. Temperature: from -20 to +70 °C; Pressure: 10 bar working, 30 bar burst. The size is chosen among the variants.
PVC hose for olive oil in the 40 mm diameter, for decanting oil and food liquids in oil mills, farms and wineries. If you have any doubts you can contact us.
PVC petrol hoses in diameters from 3 to 10 mm, item no. 7887, for tanks, taps and carburettors of small engines. If you are unsure, ask our customer service to confirm.
Thermocord HL Coated Polyester Ventilation Hose by SATI. Material: Polyester coated with polyolefin resins. Use: Ventilation and air conditioning. Dimensions among the available variants.
Fruttcord PVC Hose for High-Pressure Treatments by SATI. Use: High-pressure delivery of fungicides and herbicides. Pressure: 40 or 80 bar working, depending on the version. Dimensions selectable from the variants.
Cristalcord PVC Hose for Food Liquids by SATI. Use: Delivery of food liquids. Compliance: EU Reg. 10/2011 (simulants A, B, C) and DM 174. The size is chosen from the variants.
Poseidon Rubber Hose for Fuels, RINA Approved, by IVG. Use: Fuel supply, pleasure craft. Temperature: from -30 to +100 °C; Pressure: 10 bar working, 30 bar burst. The size is chosen among the variants.
Rubber fuel hoses in diameters from 3 to 20 mm, item no. 7786, for connecting tanks, pumps and engines. Check compatibility with the fuel. To help you choose, write to us.
PTFE (Teflon) tubes in sizes 6x4 and 8x6 mm, item no. PTB00006. Low friction and good chemical resistance, for aggressive fluids and laboratories. Ask us to confirm if in doubt.
Toronto Spiral Rubber Hose for Delivery and Suction of Water by IVG. Use: Water and non-corrosive fluids. Temperature: from -30 to +70 °C; Pressure: 10 bar working, 30 bar burst. Sizes among the available variants.
Ontario Rubber Hose for Dust and Fume Extraction by IVG. Use: Extraction of dust, fumes and non-abrasive materials. Temperature: from -30 to +85 °C; Vacuum: from 0.2 to 0.6 bar depending on the diameter. Dimensions selectable among the variants.
York Rubber Hose for Radiators and Hot Water with Antifreeze by IVG. Use: Hot water mixed with antifreeze liquids. Temperature: from -40 to +100 °C; Pressure: 3 bar working, 9 bar burst. The size is chosen among the variants.
