Automation & Power Transmission
Automation & Power Transmission
Parts that transmit motion and keep it running: bearings, belts, chains, pulleys and couplings, seals and oil seals, electric pumps and gate automation. Brands include SIT, STM, FAG, Pedrollo, ISB and Tecnotex. Below the products you will find a guide to the seven departments.
There are 622 products.
ACM roller shutter motor with twin motors D.240/76 and electric brake 1240/76 for the automation of industrial roller shutters.
ACM Unititan HR 200–220 V roller shutter motor for the automation of roller shutters in industrial and commercial settings.
DMA 100 aluminium fan with 28.1 mm central bore, for cooling electric motors. The outside diameter is chosen among the variants, from 178 to 296 mm, to match the fan fitted.
EV10 aluminium fan for cooling electric motors; outside diameters and fixing-hole centre distances selectable among the variants, with a 6.5 mm central bore on the sizes indicated.
FAG 32XX series (Item No. 3220), Schaeffler group: double-row angular contact ball bearings with solid rings, for high radial loads and axial loads in both directions in little space. Sizes selectable among the variants.
FAG double-row angular contact ball bearing, 33xx series. The verified data refers to the 3311-BD-XL-TVH-C3 variant, dimensions 55x120x49.2 mm.
AXK series axial needle roller and cage assemblies: they carry axial load in one direction only with minimum height. They are combined with separate washers. Twenty sizes selectable among the variants.
ISB balls for bearings and mechanics in 44 diameters given in inches and millimetres, from 1/4 inch (6.35 mm) upwards. Material and precision grade to be confirmed.
FAG NP 314 series cylindrical roller bearings, type NP, Schaeffler group: a single row of rollers with cage, heavy radial loads, high rigidity and solid rings, for demanding drives.
ISB YEL-type bearings for housings, in three sizes: 207 bore 35, 208 bore 40, 209 bore 45. Construction and locking on the shaft to be confirmed before ordering.
ISB bearings for air conditioners in seven sizes, from 30×52×22 to 40×62×24, selectable among the variants. Compatibility and internal construction to be confirmed on your own compressor.
ISB bearings for SA housings, series 162 from 16203 to 16210, lubricated for life in the housings of this series. Compatibility with your own housing to be checked before ordering.
The SIT VARIO variator belts are special V-belts designed for variable speed transmissions using adjustable-diameter pulleys. These belts are designed to transmit high power in systems with continuous speed adjustment, maintaining high performance and service life even in severe conditions.
Bristol 115 mechanical joint for conveyor and drive belts: it joins the belt ends with metal hooks, for repairs and for closing the belt into a loop, in a single size.
NUKR series stud type track rollers with axial guidance, fitted with cylindrical rollers without a cage and labyrinth seals. Ten sizes can be selected among the variants, from KR 22 to KR 72.
SIT one-piece cast iron pulley with solid hub, A section with 2 grooves, diameters from 50 to 280 mm, DIN 2211 grooves. Bore to be machined, up to 35 m/s. Item No. PUA200.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, A section with 3 grooves, solid hub and pitch diameters from 50 to 320 mm, bore to be machined. Item No. PT190SPA3.
SIT one-piece cast iron pulley with solid hub, A section with 4 grooves, diameters from 70 to 350 mm, DIN 2211 grooves. Bore to be machined, up to 35 m/s. Item No. PT120SPA4.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, A section with 5 grooves, solid hub and pitch diameters from 80 to 450 mm, bore to be machined. Item No. PT112SPA5.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, B section with 1 groove, solid hub and pitch diameters from 60 to 350 mm, bore to be machined. Item No. PT130SPB1.
SIT one-piece cast iron pulley with solid hub, B section with 2 grooves, diameters from 60 to 450 mm, DIN 2211 grooves. Bore to be machined, up to 35 m/s. Item No. PT112SPB2.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, B section with 3 grooves, solid hub and pitch diameters from 60 to 450 mm, bore to be machined. Item No. PT112SPB3.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, B section with 4 grooves, solid hub and pitch diameters from 60 to 400 mm, bore to be machined. Item No. PT140SPB4.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, B section with 5 grooves, solid hub and pitch diameters from 70 to 500 mm, bore to be machined. Item No. PT100SPB5.
SIT one-piece cast iron pulley with solid hub, B section with 6 grooves, pitch diameter 300 mm, DIN 2211 grooves. Bore to be machined, up to 35 m/s. Item No. PT300SPB6.
SIT one-piece cast iron pulley with solid hub and one groove, diameters from 50 to 130 mm, DIN 2211 grooves. Section to be confirmed between A and C. Item No. PT120SPA1.
SIT PT V-pulley in cast iron DIN 1691 GG20 - GG25, C section with a number of grooves (1 to 6) to choose among the variants, solid hub and pitch diameters from 110 to 320 mm. Item No. PT110SPC5.
