Workshop Equipment
Workshop Equipment
Workshop equipment split into nine sections: vacuum cleaners and pressure washers with Lavor Wash accessories and spares, generators, jacks, oil collection and recovery, cranes and lifts, vices and anvils, specialist equipment, coolers and heaters. Pick a section and read the guide below the products.
There are 490 products.
Polyethylene drum bund for 4 drums with collection bag, item no. 410002320, dimensions 1321x1438 mm with height 146 mm. For containing any leaks in the workshop.
Adjustable injector 3/8" for Lavor Wash pressure washer, item no. 21.0600.12, size 1.2 mm: it draws in the detergent and lets you dose the amount in the jet. Compatibility to be checked on your own model.
Pressure washer gun AL55 by Lavor Wash for hot water, 350 bar, 160 °C, 3/8" male connection, item no. 3.700.0030. Professional gun for intensive use in the workshop.
Lavor Wash anti-extrusion ring for 15x24x5 mm seals, item no. 4.608.0106: it supports the gasket and prevents it from being crushed when the pressure rises, extending the life of the seal.
Anti-extrusion ring 12x18x1 mm for Partner D.12 Lavor Wash, item no. 4.008.0695: a spare part that protects the O-Ring from being crushed under pressure and preserves its seal.
Lavor Wash anti-extrusion ring 14x22x1.3 mm, item no. 4.008.0347: a support ring to be paired with the sealing gasket, a spare part for pressure washer maintenance. Compatibility to be verified on your own model.
Lavor Wash anti-extrusion ring, dimensions 8x11x1.5 mm, item no. 4.608.0326: a spare part supporting the gasket, useful against crushing under pressure and to make the seal last longer.
Lavor Wash anti-extrusion ring 15x25x2 mm, item no. 4.008.0109: a support element that sits alongside the gasket and limits its deformation under pressure. Compatibility to be verified on your own model.
Swivel tube, spare accessory for workshop equipment used for handling oil. Length, connection and compatible appliance model to be checked before ordering.
Replacement motor for vacuum cleaners, model ASB1000, Lavor Wash. Motor unit to be replaced when the machine stops or has weak suction; model and connections to be compared with the motor fitted.
Replacement motor for vacuum cleaners, model ASB1000/1, Lavor Wash. Version with the /1 designation, distinct from the ASB1000 model: to be compared with the plate of the motor to be replaced.
Replacement motor ASB1200 MINY for Miny vacuum cleaners, Lavor Wash. Motor unit identified by the designation ASB1200 MINY, to be compared with the plate of the machine before buying.
Replacement motor for vacuum cleaners, model ASB1200, Lavor Wash. Part for replacing a motor unit with the same designation; to be compared with the plate before ordering.
Replacement motor for vacuum cleaners, model ASB1300/3, Lavor Wash. The designation with the /3 suffix identifies this version: to be compared with the plate of the motor fitted before ordering.
Replacement motor for vacuum cleaners, model ASOS 1000, Lavor Wash. Motor unit to be replaced when the original is faulty; designation, overall dimensions and connections to be compared before buying.
ASR1000 two-stage motor, 1000 W, for vacuum cleaners. Replacement two-stage motor unit: designation, overall dimensions and connections to be compared with the motor to be replaced before buying.
Lavor Wash ball quick coupling with 1/2" female thread, part B only, item no. 26.2010.30: spare part to replace the half coupling and restore the quick connection.
Lavor Wash ball quick coupling, 3/8" female thread, part B only, item no. 26.2030.00: spare part to restore the secure connection between hose and accessories.
Lavor Wash ball quick coupling, 3/8" female thread, part B only, item no. 26.2010.10: spare half coupling to connect and disconnect accessories quickly.
Bazzano brass oil syringe, available with diameters D.30, D.40 and D.50: for lubricating mechanical components and machinery with precision. The diameter is chosen among the variants.
Bazzano manual grease gun in two versions: screw type with diameter D.40 and push type with diameter D.45. For delivering grease precisely to lubrication points.
Bazzano flexible-spout oil can in five capacities, from GR 200 to GR 1000. Hand tool for dispensing oil on bearings, guides and chains. Sizes can be selected among the variants.
Bazzano transfer container with flexible hose, available in 1 litre and 2 litre capacities: handy for moving oil and other liquids from one container to another without dripping.
BETA ASSORTMENT OF 23 TOOLS FOR RELEASING ELECTRICAL CONNECTORS ART. 1497497/C23
Beta 1757 plastic top-up bottle for battery liquid, with transparent body for checking the level and flexible spout. Available in 250, 500 and 1,000 cc versions.
