The SIT VARIO variator belts are special V-belts designed for variable speed transmissions using adjustable-diameter pulleys. These belts are designed to transmit high power in systems with continuous speed adjustment, maintaining high performance and service life even in severe conditions.
Belts
Belts
SIT drive belts: classic V-belts in sections Z, A, B, C and D, narrow SPZ, SPA and SPB, American 3V and 5V, timing belts with inch pitch XL, L and H, Eagle timing belts, Poly-V and variator belts. Every listing gives its own sizes. Below the products you will find a guide to which belt your pulley needs.
There are 35 products.
SIT Eagle Blue 35 timing belt, Silent Sync series: 14 mm pitch, 35 mm width, staggered helical teeth in HNBR rubber with aramid cords. Lengths from 994 to 3,920 mm selectable among the variants.
SIT Eagle Green 52.5 (Silent Sync): synchronous timing belt with 14 mm pitch and 52.5 mm width, 8.6 mm thickness. Staggered helical tooth, HNBR rubber, lengths from 994 to 3,920 mm among the variants.
Eagle Orange 70: SIT timing belt with 14 mm pitch and 70 mm width, quiet and slip-free, with a stated efficiency of 98 per cent. Lengths from 1,120 to 3,920 mm selectable among the variants.
SIT Eagle Purple 64 belt, P type of the Silent Sync / Eagle range: 8 mm pitch, 64 mm width, staggered helical tooth and aramid cords. Lengths from 720 to 1,600 mm among the variants.
SIT Eagle Red 105 timing belt, Silent Sync series: 14 mm pitch, 105 mm width, staggered helical teeth in HNBR rubber with aramid cords. Lengths from 1,260 to 3,920 mm selectable among the variants.
SIT Eagle White 32 (Silent Sync): synchronous timing belt with 8 mm pitch and 32 mm width, 5.3 mm thickness. Staggered helical tooth, HNBR rubber, lengths from 640 to 2,400 mm among the variants.
Eagle Yellow 16: SIT timing belt with 8 mm pitch and 16 mm width, quiet and slip-free, with a stated efficiency of 98 per cent. Lengths from 640 to 2,400 mm selectable among the variants.
The perforated V-belt is a standard section V‑belt intended for customisable industrial and mechanical applications. Thanks to the regular holes along the back and the dedicated joints, the belt can be made to any length and is sold by the metre, so that it fits any plant or transmission system perfectly.
J section Poly-V belt sold per rib: in the order you state the number of ribs of the belt. Profile pitch 2.34 mm, length selectable among the variants.
SIT classic timing belt H 075, pitch 1/2 inch (12.700 mm), width 19.1 mm (0.75 inch), in chloroprene rubber with glass-fibre cords. Lengths selectable among the variants.
SIT H 100 timing belt with 12.700 mm pitch and 25.4 mm width, from the Classic inch range: chloroprene rubber, glass cords, speed up to 30 m/s. Lengths selectable among the variants.
SIT H 150 classic timing belt: pitch 12.700 mm, width 38.1 mm, nylon-coated teeth and glass-fibre cords. Maintenance-free, lengths selectable among the variants.
H 200 from the SIT Classic range: timing belt with 12.700 mm pitch and 50.8 mm width, in chloroprene rubber with glass-fibre cords and polyamide teeth. Lengths among the variants.
SIT classic timing belt H 300, pitch 1/2 inch (12.700 mm), width 76.2 mm (3 inches), in chloroprene rubber with glass-fibre cords. Lengths selectable among the variants.
SIT L 050 timing belt with 9.525 mm pitch and 12.7 mm width, from the Classic inch range: chloroprene rubber, glass cords, speed up to 30 m/s. Lengths selectable among the variants.
SIT L 075 classic timing belt: pitch 9.525 mm, width 19.1 mm, nylon-coated teeth and glass-fibre cords. Maintenance-free, lengths selectable among the variants.
L 100 from the SIT Classic range: timing belt with 9.525 mm pitch and 25.4 mm width, in chloroprene rubber with glass-fibre cords and polyamide teeth. Lengths among the variants.
SIT classic timing belt XL 037, pitch 1/5 inch (5.080 mm), width 9.5 mm (0.37 inch), in chloroprene rubber with glass-fibre cords. Lengths selectable among the variants.
SIT XL 050 timing belt with 5.080 mm pitch and 12.7 mm width, from the Classic inch range: chloroprene rubber, glass cords, speed up to 30 m/s. Lengths selectable among the variants.
SIT classic wrapped A section V-belt, Excelite ES series, ISO 4184 and DIN 2215 standards: sizes A 15 to A 60 selectable among the variants, with inside length in inches.
SIT Excelite ES A section V-belt, standard wrapped for classic pulleys: A 61 to A 98, with section and inside length in inches to be selected among the variants.
SIT Excelite ES B section V-belt, standard wrapped for classic pulleys: B 100 to B 300, with section and inside length in inches to be selected among the variants.
SIT Excelite ES classic wrapped B section V-belt: B 24 to B 60 in inches of inside length, polyester and chloroprene rubber, ISO 4184 and DIN 2215 standards.
SIT classic wrapped B section V-belt, Excelite ES series, ISO 4184 and DIN 2215 standards: sizes B 61 to B 99 selectable among the variants, with inside length in inches.
SIT Excelite ES classic wrapped C section V-belt: C 100 to C 300 in inches of inside length, polyester and chloroprene rubber, ISO 4184 and DIN 2215 standards.
SIT classic C section V-belt (C 43 to C 99): wrapped construction, chloroprene rubber and polyester cords, ISO 4184 and DIN 2215 standards. Item No. CLC90.
SIT classic wrapped D section V-belt, Excelite ES series, ISO 4184 and DIN 2215 standards: sizes D 110 to D 285 selectable among the variants, with inside length in inches.
The SIT section “SPA” V-belt is an industrial V-belt designed to provide greater reliability, stability and service life than traditional section A belts, while maintaining a similar top width. It is used in mechanical applications where consistent performance and greater durability over time are required.
The section “SPB” V-belt is an industrial V-belt belonging to the SIT SP range, designed for medium-to-high power transmission applications. Compared with traditional section B belts, the SPB offers greater stability, higher efficiency and longer service life, thanks to an optimised profile and construction.
The section “SPZ” V-belt is an industrial V-belt belonging to the SIT SP series, designed for light and medium-light power transmissions. Compared with traditional section Z belts, the SPZ guarantees greater operating stability, better efficiency and longer service life, thanks to a more advanced construction.
SIT classic Z section V-belt with 10 x 6 mm profile, ISO 4184 and DIN 2215 standards, also in a cogged version. Lengths in inches selectable among the variants.
SIT 3V section V-belt, American narrow profile according to RMA and MPTA: outside length in inches multiplied by ten, also in a cogged version. Sizes selectable among the variants.
SIT 5V section V-belt, American narrow profile 16 mm wide, RMA and MPTA standards. Outside length in inches multiplied by ten, sizes selectable among the variants.
SIT classic A section V-belt (A 100 to A 196): wrapped construction, chloroprene rubber and polyester cords, ISO 4184 and DIN 2215 standards. Item No. CLA112.
