Stayer 369 drill with self-tightening chuck, which lets you change the bit by hand without a key. A tool for drilling in the workshop, at home and on building sites. Technical data to be confirmed: ask us for the details before ordering.
Stayer
Stayer
Stayer tools in three departments: power tools, machine tools and accessories. You will find a polisher, a demolition hammer, mixers and drills, the bench circular saw and the band saw for metal, plus polishing bonnets and mixer paddles. Below the products there is a guide to help you choose between the departments.
There are 12 products.
Stayer 12 V cordless drill driver with two lithium batteries, charger and case: two mechanical speeds, chuck up to 10 mm, drills up to 20 mm in wood. Model and battery capacity to be confirmed.
Stayer H2 mixing whisk, item no. 12.232, with M14 threaded fitting and a 140 mm paddle that pushes the material from the bottom upwards. For liquid and low-viscosity products on mixers with an M14 fitting.
Stayer H3 whisk for mixers, item no. 12.233: 140 mm propeller on an M14 threaded fitting, designed for liquid and low-viscosity materials that are stirred from the bottom upwards.
Stayer electric metal polisher with 180 mm self-adhesive backing pad, 1200 W, 6-speed electronic control from 600 to 3200 rpm and M14 fitting. Model code to be confirmed before ordering.
Stayer M 1200 series electric mixer with one H2 120 mm whisk, M14 fitting, two mechanical speeds and 6-position electronic speed control. For paints, cement and viscous materials. Exact model to be confirmed.
Stayer M 1600 1600 W electric mixer with M14 fitting, S1 continuous-duty motor, two mechanical speeds and 6-position electronic speed control. One whisk supplied: type and diameter to be confirmed.
Stayer MD15K electro-pneumatic demolition hammer with 30 mm hex fitting: according to the Stayer data sheet for the MD 15 B K it gives 1750 W, 45 J and 1900 blows/min, with double anti-vibration system. Model code to be verified.
Stayer WD3 whisk for the Stayer DM 1450 twin mixer, M18 fitting. The 114/140 dimensions given in the name have not been confirmed in a manufacturer's data sheet: please ask us before ordering.
Stayer SC250 PRO mitre saw combined with a Ø 250 mm blade and upper cutting table, designed for straight, 45°/90° and bevel cuts in wood, aluminium, laminates, PVC and plastic with safety and versatility.
Stayer SN 1470 metal-cutting band saw, item no. 1.5526: 1/2 HP single-phase motor, 1470 x 13 x 0.65 mm bimetal blade, cuts up to 100 x 150 mm at 90 degrees, arm tilting from 0 to 60 degrees, 22 kg.
Stayer 115 mm wool bonnet with hook-and-loop fastening, item no. 00782600: it attaches to and is removed from the polisher's hook-and-loop backing pad without tools. For the polishing stage with pastes and polishes.
