DREMEL ACCESSORY ART.111 KIT OF 3 MILLING CUTTERS

The Dremel SC 407 is an EZ SpeedClic sanding set consisting of a mandrel with a quick-change system and two 13 mm sanding bands of different grits, designed for sanding, shaping and material removal on wood, plastic, soft metals and other materials. The EZ SpeedClic™ system allows accessories to be changed without the use of spanners, making use quicker and more intuitive.

Technical data:

• Type: EZ SpeedClic mandrel + sanding bands for sanding

• Model: SC 407

• Shank diameter: 3.2 mm

• Band working diameter: 13.0 mm

• Abrasive material: aluminium oxide

• Grits included: 60 (more aggressive) and 120 (finer)

• Compatibility: rotary tools with 3.2 mm chuck and EZ SpeedClic™ system

• Recommended operating speed: up to 35 000 rpm

• Mounting system: EZ SpeedClic™ — tool-free accessory change

Exact package contents:

• 1 × EZ SpeedClic sanding mandrel

• 1 × 13 mm sanding band, grit 60 (very aggressive)

• 1 × 13 mm sanding band, grit 120 (finer)

Technical applications:

• Sanding and material removal on softwood and hardwood

• Roughing and finishing on plastics and composite materials

• Cleaning and removal of light oxidation from soft metals

• Contouring and surface preparation before finishing

The Dremel 569 is a tungsten carbide removal bit designed for Dremel-type rotary tools, specifically for removing mortar or grout from the joints between tiles during renovation or maintenance work. It is intended for spot use or small repairs in combination with the dedicated grout removal attachment (model 568) to keep the bit centred and ensure controlled feed of the tool.

Technical data:

• Type: tungsten carbide grout / mortar removal bit

• Model: 569

• Working diameter: ~1.6 mm (≈ 1⁄16″)

• Shank diameter: 3.2 mm (≈ 1⁄8″), compatible with Dremel rotary tools

• Accessory length: approx. 58 mm

• Material: tungsten carbide

• Recommended operating speed: 15 000 – 20 000 rpm (use with guide and slow feed)

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm shank; can be used with the grout removal attachment 568 to remove grout between tiles

Technical applications:

• Controlled removal of mortar or grout from the joints between tiles before regrouting or resealing

• Preparing tile joints for maintenance or replacement

• Use with a guide/fixing to keep the bit aligned between the tiles

The Dremel 426 is a fibreglass-reinforced abrasive cutting disc for rotary tools, designed for straight cuts and slots in metal and a variety of other materials. It offers greater strength and durability than basic discs, making it suitable also for harder metals and heavy-duty use compared with standard discs.

Technical data:

• Type: fibre-reinforced abrasive cutting disc

• Model: Art. 426

• Quantity: packs available of 1 or 5 discs (variants available)

• Working diameter: 32 mm

• Disc thickness: approx. 1.1 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Abrasive material: aluminium oxide with fibreglass reinforcement

• Maximum operating speed: up to 35 000 rpm

• Max cutting depth: approx. 14 mm

• Mounting: with screw mandrel (pin) type 402

• Use: cutting along the edge only of the disc

Workable materials:

• Ferrous and non-ferrous metals, including hardened steel, aluminium, copper, brass, stainless steel

• Thin wood, plastic, plasterboard, light marble and brick (short cuts)

Technical applications:

• Making straight cuts and slots in metal, sheet metal and sections

• Cutting bolts, screws or metal bars with control and precision

• Cuts in composite or plastic materials during repair or modification work

The Dremel 670 is a mini circular saw to attach to a Dremel rotary multi-tool, designed to make clean, straight cuts in wood and wood-like materials. It turns your multi-tool into a small portable saw with an integrated directional guide and a transparent guard for better visibility while cutting.

Technical data:

• Type: mini circular saw attachment for multi-tool

• Compatibility: suitable for Dremel models and other rotary tools compatible with the quick connect system

• Standard blade included: mini circular blade Ø 31.8 mm

• Maximum cutting depth: 6.35 mm

• Structure: angled base for perpendicular cuts with directional guide

• Transparent guard for visibility of the cutting area

• Attachment length: approx. 50 mm

• Overall width: approx. 90 mm

• Overall depth: approx. 45 mm

• Use: thin, precise cuts in wood, laminates and similar materials

The Dremel 26150201JA is a set of replacement soldering tips designed for use with the Dremel VersaTip 2000 and VersaFlame 2200 gas torches/soldering irons. This accessory allows you to carry out precision soldering work, and to heat, melt or join thin metals and components in detail applications.

Technical data:

• Type: replacement soldering tips

• Model: 26150201JA

• Pack quantity: 2 pieces

• Tool compatibility: Dremel VersaTip 2000 and Dremel VersaFlame 2200 (gas soldering irons)

• Use: precision soldering on thin metals and small joints

• Tip material: heat-resistant metal

Technical applications:

• Soldering of small or thin metal components

• Detail repairs on metal objects

• DIY applications and finishing work with gas soldering irons

The Dremel Art. 636 is a drill bit set specifically for wood, designed for precision drilling in wood and similar materials with compatible rotary tools. Each bit features a centring point for a precise, straight start to the hole and a titanium coating for longer life and consistent performance.

Technical data:

• Type: wood drill bit set for rotary tools

• Model: 636

• Number of bits included: 4 pieces

• Working diameters: 3 mm, 4 mm, 5 mm, 6 mm

• Shank diameter: 3.2 mm (1/8″)

• Coating: titanium for long service life

• Centring point: yes, for accurate holes and a straight entry

• Recommended use: drilling in softwood, hardwood, laminate, plywood, chipboard and fibreboard

• Maximum recommended operating speed: up to 35 000 rpm

• Typical applications: precision drilling in wood, making holes from Ø 3 mm to Ø 6 mm, preparing joints, screw pilot holes and craft details

The Dremel 430 is a mandrel with abrasive cylinder and abrasive band (60 grit) for rotary tools, designed for sanding, shaping and removing surface finishes on a wide range of materials. The abrasive band can be replaced quickly by loosening the top screw of the mandrel and allows the tool to be adapted to various abrasion operations.

Technical data:

• Type: mandrel with abrasive cylinder and abrasive band

• Model: 430

• Working diameter: 6.4 mm (1/4″)

• Abrasive grit: 60 (coarse)

• Shank diameter: 3.2 mm

• Total length: ~70 mm (approx. 2,75″)

• Abrasive material: aluminium oxide on mandrel band

• Maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck

Technical applications:

• Sanding, shaping and deburring of wood and wood-based materials

• Removal of rust or old finishes from metal surfaces

• Preparing surfaces in fibreglass, rubber or plastic before further processing

• Rough shaping of profiles or contours before fine finishing

Set of 6 EZ SpeedClic abrasive discs designed for sanding and shaping operations on surfaces and edges, with the EZ SpeedClic mounting system, which allows quick, tool-free replacement of accessories. The discs are suitable for relatively soft and medium-hard materials and are used with a compatible SpeedClic mandrel/mount.

Technical data:

• Type: EZ SpeedClic abrasive discs for sanding and shaping

• Model: SC411

• Working diameter: 30 mm

• Fitting diameter (shank): 3.2 mm

• Grit: 60 (medium abrasive)

• Quantity: 6 discs

• Mounting system: EZ SpeedClic – quick tool-free change

• Tool compatibility: compatible with Dremel SpeedClic chuck (e.g. SC402)

• Applications: sanding of flat surfaces and edges, material removal on wood, plastic, soft metals and other comparable materials

The Dremel 932 is an aluminium oxide grinding stone designed for grinding, deburring, weld deburring and material removal on metal surfaces, cast iron and other ferrous materials. It is compatible with rotary multi-tools fitted with a chuck that accepts 3.2 mm accessories.

Technical data:

• Type: aluminium oxide grinding stone

• Model: 932 (1 piece)

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm

• Material: aluminium oxide (durable abrasive)

• Shape: cylindrical / tapered for access to profiles and cavities

• Accessory length: approx. 40 mm

• Recommended maximum operating speed: up to 25,000 rpm

• Compatibility: rotary tools compatible with 3.2 mm accessories

Technical applications:

• Grinding of metal surfaces

• Deburring of welds and sharp edges

• Material removal in hard-to-reach areas

• Preparation of joints and surfaces for finishing

The Dremel 443 is a set of replacement collets for rotary tools, designed to ensure correct clamping of bits and accessories of standard diameters. Each collet fits into the chuck of the multi-tool to match the shank size of the accessory, providing a stable grip and control in precision work.

Technical data:

• Type: set of replacement collets for rotary tools

• Model: 443

• Contents: 3 × collets

  • 0.8 mm

  • 1.6 mm

  • 2.4 mm

• Compatibility: Dremel rotary multi-tools and compatible models with a standard chuck for 0,8 – 2.4 mm collets

• Material: sturdy metal for a secure grip and long life

• Clamping diameter: suitable for the standard Dremel collet nut

• Use: allows you to secure bits, cutters, grinding wheels and accessories of matching diameters

• Installation: they are inserted into the chuck and tightened with the nut/chuck to lock the accessory

• Technical applications:

  • Fitting of bits with a small shank for drilling and engraving

  • Clamping of accessories for sanding, grinding and cutting

  • Better control and stability when working on wood, metal, plastic and composite materials

The Dremel 540 is a set of universal cutting discs for rotary multi-tools, designed mainly for straight cutting of metal and also suitable for wood, plastic, light masonry and composite materials. The discs cut along the edge only and are to be fitted to the tool with the 402 screw mandrel.

Technical data:

• Type: cutting discs for rotary multi-tool

• Model: 540

• Quantity: set of 5 pieces

• Working diameter: 32.0 mm

• Disc thickness: 1.6 mm (typical)

• Shank diameter: 3.2 mm

• Max. cutting depth: 14.0 mm

• Maximum operating speed: ≤ 35 000 rpm

• Shape: thin disc

• Fixing: with 402 screw mandrel

Workable materials: metal (steel, stainless steel, aluminium, copper, brass), sheet metal, bolts/screws, plastic, thin wood, panels, plasterboard and light building materials.

Technical applications:

• Making straight cuts in metal and thin materials

• Cutting bolts, screws and sheet metal without the need for larger tools

• Sectioning plastic materials and light panels with control

The item 113 is a cylindrical engraving cutter of 1.6 mm designed for detail work on a wide range of materials. It is specifically made for engraving, shaping and material removal with high-speed rotary tools, offering precision even on curved and complex surfaces.

Technical data:

• Type: engraving / carving cutter

• Model: 113 / 26150113JA

• Working diameter: 1.6 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~45 mm

• Material: high-speed steel

• Recommended maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm chuck

Quantity in pack:

• 1 × engraving cutter 113 (some packs may include several bits depending on variant)

Technical applications:

• Engraving and detail work on wood, plastic, laminates and similar materials

• Shaping, milling of small surfaces and creation of fine grooves

• Also suitable for work on soft metal, leather, rubber and plexiglass

The Dremel 26159929JA, also identified as accessory 9929, is a diamond engraving bit designed to work with the Dremel 290 engraver and compatible rotary tools. Thanks to its diamond-coated head, it offers longer life and wear resistance compared with standard bits, allowing harder materials such as glass and stainless steel to be engraved with precision and control.

Technical data:

• Type: diamond engraving bit

• Model: 9929 / 26159929JA

• Bit material: diamond / diamond coating

• Bit diameter: ~3 mm

• Overall length: ~20 mm

• Tool compatibility: Dremel 290‑1 / 290‑3 Hobby engraver and multi-tools with a chuck suitable for engraving

• Quantity per pack: 1 diamond bit

Technical use:

• Engraving of glass, ceramic, marble, stainless steel and hard materials

• Creating thin lines, grooves and precise details on difficult surfaces

• Suitable for craft projects, model making and precision work

The item 193 is a 2.4 mm high-speed ball cutter (carving/engraving bit) for rotary tools, designed for engraving, shaping and removing material in detail work on wood, plastic and similar materials. Ideal for precision operations, creating grooves and profiles, or making hollows and small holes on curved or flat surfaces.

Technical data:

• Type: high-speed ball carving/engraving cutter

• Model: 193 / 26150193JA

• Working diameter: 2.4 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 1 × item 193

Technical applications:

• Engraving, shaping and modelling of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small holes on flat or curved surfaces

• Decoration and detail work on soft materials

The Spare nozzle kit for Dremel VersaTip includes replacement soldering tips for gas tools of the VersaTip and VersaFlame series. This set is designed to restore soldering function when the original nozzles are worn or blocked and helps maintain adequate thermal performance in gas brazing and soldering tools.

Technical data:

• Type: kit of replacement soldering tips/nozzles

• Tool compatibility: Dremel VersaTip 2000 / VersaFlame 2200 (gas soldering irons) and equivalent models that use interchangeable soldering tips

• Material: heat-resistant metal (steel or specific soldering alloy)

• Applications: soldering of components, joints and fine metal details

• Pack quantity: 4 replacement nozzles/tips

• Use: replacement of worn or blocked original nozzles, restoring soldering precision

Main features:

• Standard-shape soldering tip/cone for VersaTip gas tools;

• Design compatible with the tool's original fitting systems;

• Helps maintain soldering efficiency and quality even after the original nozzles have worn.

The Dremel 84922JA is a set of silicon carbide abrasive points for rotary tools with a standard 3.2 mm shank. These small conical points are designed for grinding, deburring and engraving on hard or non-ferrous materials where traditional aluminium oxide points are less effective.

Technical data:

• Type: silicon carbide abrasive points for grinding and deburring

• Model: 84922JA

• Pack quantity: set of 3 pieces

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm

• Shape: small cone for access to surfaces and details

• Abrasive material: silicon carbide, more durable than aluminium oxide points

• Accessory length: approx. 40 mm

• Recommended maximum operating speed: up to 25 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a chuck for 3.2 mm accessories

Technical applications:

• Grinding and deburring of hard and brittle materials such as glass, ceramic, porcelain, stone and non-ferrous metals

• Engraving and material removal on uneven surfaces

• Preparation of complex surfaces before finishing