DREMEL STYLO+ MULTI-TOOL

The Dremel VersaTip is a multifunction butane gas-powered soldering iron, designed for a variety of cordless heat operations, including soldering, hot cutting, pyrography, brazing and paint stripping. The temperature is adjustable to suit different applications, while the built-in ignition system allows a quick and easy start. The kit includes several interchangeable accessories to cover different modes of use.

Technical data:

• Power supply: liquid butane gas (fuel not included)

• Ignition: built-in piezoelectric

• Maximum temperature: approx. 1.200 °C (open flame)

• Hot air temperature: approx. 680 °C

• Tip temperature: approx. 550 °C

• Tank capacity: ~12 ml of gas (~7 g)

• Operating time: up to ~90 minutes with a full tank (depends on use)

• Tool weight: approx. 0.135 kg

• Dimensions (approx.): 19 cm length × 2.5 cm width × 2.5 cm depth

• Mode of use: cordless for maximum mobility

• Accessories included: several interchangeable tips for soldering, hot cutting, pyrography, flat torch and more depending on the kit selected

Technical applications: light soldering of wires/thin metals, brazing, thermal cutting of thin materials, pyrography on wood/plastic, removal of paints or coatings with heat.

Dremel 3000 multi-tool, 125W, with 15 accessories, variable speed 10.000-33.000 rpm, item F0133000JW. EZ Twist quick accessory change.

Portable tool powered by liquid butane gas with integrated tank, designed for soldering, brazing, heat shrinking and localised heating applications with a controllable high-performance flame. It reaches high temperatures in a short time and refills quickly for continuous use.

Technical data:

• Power supply: liquid butane gas

• Ignition: piezoelectric (no need for an external lighter)

• Tank capacity: 42 ml / 22 g

• Continuous burn time: approx. 75 minutes

• Flame temperature: up to 1.200 °C in open flame mode

• Hot air temperature: approx. 680 – 1.000 °C

• Soldering tip temperature: approx. 550 °C

• Tool weight: approx. 0.227 kg

• Compact dimensions: approx. 170 mm length × 60 mm width × 110 mm depth

• Typical supplied items (vary depending on the pack): catalyst, soldering tip, flame spreader, deflector, solder with sponge and metal case

The Dremel Workstation 220JB is a multifunction column stand designed to turn your Dremel rotary tool into a stable and versatile benchtop workstation. It allows you to hold the tool in a vertical or tilted position for drilling, sanding or polishing operations with greater precision. The structure includes depth guides, an accessory storage compartment and a telescopic support for flexible shaft tools.

Technical data:

• Type: column stand / workstation for rotary tools

• Model code: 220JB

• Maximum drilling stroke: 50 mm

• Tool angle adjustment: up to 90° in 15° increments

• Integrated tool holder also compatible with flexible shaft

• Integrated accessory storage compartment

• Cable management included for tidiness and safety

• Approximate weight: approx. 2.4 kg

• Overall dimensions: approx. 15,2 × 15,2 × 30.5 cm (L × D × H)

Main functions:

• Holding the Dremel rotary tool for stationary operations

• Ability to drill vertically and at an adjustable angle

• Support for benchtop sanding and polishing

• Telescopic tool holder for securing tools with a flex shaft attachment

• Storage space for Dremel accessories

The Dremel Multi‑Vise (model 2500JA) is a multifunctional clamping device designed to hold workpieces and Dremel tools during cutting, sanding, polishing or precision work, allowing better control of the project and greater stability.

Technical data:

• 3‑in‑1 function: fixed vice, freestanding clamp and tool holder (can be used as a stand to tilt or secure the multi-tool).

• Base rotation: adjustable through 360° for working from different angles.

• Tilt: the vice can be tilted up to 50° for greater positioning versatility.

• Rubber jaws with V-grooves for a secure grip on round or irregularly shaped workpieces, protecting delicate surfaces.

• Quick-release button to quickly release and reposition the workpiece.

• Compatibility: suitable for most Dremel multi-tools and can be used as a fixed stand on the workbench.

• Dimensions: approx. 32 cm (length) × 9.5 cm (width) × 32 cm (depth).

• Supplied with: 1 Multi‑Vise, set of clamping accessories and quick guide/manual.

Functional features:

• Clamp that can be configured as a bench vice to hold the workpiece firmly in place.

• Can be used as a tool holder to convert the multi-tool into a small stationary sander, grinder or polisher.

• The soft-coated jaws protect more delicate workpieces.

The Dremel 4250 is a corded electric multi-tool with a rated power of 175 W and variable speed, designed for a wide range of technical work on materials such as wood, metal, plastic, ceramic and others. Fitted with the EZ Twist quick accessory change system and supplied with 35 accessories, it allows cutting, sanding, grinding, polishing, engraving and cleaning operations.

Technical data:

• Rated power: 175 W

• Operating voltage: 220‑240 V

• No-load speed: 5.000 – 35,000 rpm

• Speed setting: continuously variable

• Accessory change system: EZ Twist (tool-free)

• Weight: 0.60 kg

• Dimensions (L × D × H): approx. 23 × 4 × 5 cm

• Noise (sound pressure): approx. 72,5 dB(A)

• Sound power: approx. 83,5 dB(A)

• Average vibration: approx. 14.1 m/s²

• Supplied with: 35 multi-purpose accessories included (for cutting, sanding, polishing and more)

• Case: carry bag or case for tool/accessories (included)

The Dremel Engraver model 290JM/Engraver is a corded power tool specifically designed for precision engraving on a wide range of materials, including metal, glass, wood, plastic and ceramic. The variable engraving depth adjustment and ergonomic grip provide control and comfort even during prolonged use.

Technical data:

• Rated power: 35 W

• Operating voltage: 230 V

• Weight: 0.31 kg

• Tool length: approx. 17 cm

• Strokes per minute: approx. 6 000 spm

• Grip: soft for comfort and control

• Engraving system: reciprocating action with adjustable depth

• Engraving tip: interchangeable carbide

• Typically supplied with: engraver, replaceable carbide engraving tip, stencils for creative engraving, instruction manual

Applications: engraving on metal, glass, wood, plastic and ceramic surfaces; ideal for detail work, personalisation and decoration.

The Dremel 4250JF is a high-performance corded multi-tool with a 175 W motor and variable speed, designed for technical cutting, sanding, grinding, cleaning, polishing and engraving on materials such as wood, metal and plastic. The set includes 45 genuine accessories and a flexible shaft for greater precision on details or in confined spaces, as well as extras such as a parallel/circular guide and splinter guard.

Technical data:

• Rated power: 175 W

• Operating voltage: 220 – 240 V

• No-load speed: 5.000 – 35,000 rpm

• Speed setting: continuously adjustable

• Accessory change system: EZ Twist / EZ Speed (tool-free)

• Tool weight: approx. 0.60 kg

• Tool dimensions: approx. 23 × 5 × 4 cm

Supplied with:

• Dremel 4250JF multi-tool with 175 W motor

• 45 genuine multi-purpose accessories (grinding, cutting, polishing, routing, cleaning etc.)

• Flexible shaft for precision work and hard-to-reach places

• Extras: parallel guide and circular guide

• Splinter / splash guard

• Organiser case for tool and accessories

• User manual and instructions

The Dremel 8220JH is a cordless multi-tool powered by a 12 V lithium battery, designed for a wide range of operations on different materials such as wood, metal, plastic and glass. Fitted with variable speed, the EZ Twist quick accessory change system and an integrated LED light, it is suitable for cutting, sanding, engraving, grinding, sharpening, polishing and cleaning work.

Technical data:

• Battery voltage: 12 V

• Battery capacity: 2.0 Ah

• Battery type: Lithium‑Ion with ECP (Electronic Cell Protection)

• Charging time: approx. 1,5 h

• No-load speed: 5.000 – 35,000 rpm

• Speed setting: fully variable

• Accessory change system: EZ Twist (tool-free)

• Weight: approx. 0.66 kg

• Dimensions (L × D × H): 250 × 45 × 65 mm

• Integrated lighting: LED for work area visibility

• Supplied with: 45 accessories for cutting, sanding, polishing, milling and cleaning + 2 additional attachments (detail grip and angled support)

The Dremel Driver is a cordless driver designed for precision screwdriving, ideal for light assembly and small fastening jobs. A compact, lightweight tool with an ergonomic grip and a quick bit change system.

Technical data:

• Battery voltage: 7.2 V Li‑Ion

• Battery capacity: 1.0 Ah

• Charging time: approx. 5 h

• Variable speed: 0 – 300 rpm

• Weight: approx. 0.43 kg

• Tool length: 12.6 cm

• Battery technology: Lithium‑Ion

• Chuck/bit holder: magnetic bit holder, compatible with 1/4″ hex bits

• Supplied with: driver, battery charger, 8 hex bits, detachable bit holder

The Dremel Moto‑Saw 70 W is a compact electric fretsaw designed for precision cuts in a variety of materials, including wood, plastic and metal, and can be used both in stationary and hand-held mode. The quick blade change system and variable speed control allow it to be adapted to different cutting requirements.

Technical data:

• Motor power: 70 W

• Operating voltage: 220 – 240 V

• No-load speed: 1 500 – 2 250 1/min

• Cutting depth: 18 mm

• Weight: 1.10 kg

• Tool dimensions (L × D × H): 40 cm × 21 cm × 37 cm

• Quick accessory change system: quick-release change lever

• Sound pressure: 77,3 dB(A)

• Sound power: 88,3 dB(A)

• Vibration (average value): 2.5 m/s²

• Operating modes: stationary (mounted) or hand-held (easy to handle)

• Included as standard: 2 multi-purpose wood cutting blades, 2 precision wood cutting blades, 1 metal cutting blade, parallel guide, carry case and user manual

The Dremel 3000 JS is a high-performance corded power multi-tool with a 130 W motor and variable speed, supplied with 25 genuine accessories and a flexible shaft for precision work in hard-to-reach places. The tool features a soft grip and a quick accessory change system for greater operating versatility

Technical data:

• Voltage: 230 V

• Motor power: 130 W

• No-load speed: 10.000 – 33,000 rpm

• Speed setting: variable

• Accessory change system: EZ Twist

• Weight: approx. 0.55 kg

• Tool dimensions: approx. 19 cm length × 5 cm width × 4.5 cm depth

• Chuck: compatible with standard Dremel multi-purpose accessories (0,8 – 3.2 mm)

• Supplied with: 25 multi-purpose accessories and flexible shaft for precision and extended control

Typical applications: cutting, engraving, sanding, grinding, polishing, cleaning of surfaces and details on wood, metal, plastic and other materials.

The Dremel 225 flexible shaft is a precision accessory for Dremel rotary tools, designed to allow detailed and finishing work in hard-to-reach places. It connects easily to the body of the multi-tool via the Quick Connect system, turning the tool into a fine-control instrument with a “pen”-style grip.

Technical data:

• Type: flexible shaft for rotary tools

• Model: 225 / 225‑02 (versions with ergonomic grip and Quick Connect collar)

• Total length: approx. 1070 mm (flexible cable)

• Bending radius: approx. 127 mm (optimal flexibility in tight spots)

• Quick Connect fast coupling for quick connection to the Dremel multi-tool

• Soft grip for better control and precision comfort

• Compatible with Dremel rotary tools fitted with Quick Connect (200, 3000, 4000, 8200, 8220 series, etc.)

• Accepts accessories with shank up to 1/8 in (≈ 3.2 mm)

Applications: engraving, polishing, grinding, sanding and detail work in tight spaces and on complex surfaces.