DREMEL ACCESSORY 453 (3 PCS)

The Dremel 531 cup brush is a rotary tool accessory designed for cleaning, deburring and surface finishing on metals that are difficult to work, in particular those resistant to corrosion. The cup profile and stainless steel bristles provide an effective abrasive action with a reduced tendency to leave rust residue or contamination.

Technical data:

• Type: cup steel brush for cleaning/polishing

• Model: 531

• Working diameter: 13 mm

• Shank diameter: 3.2 mm

• Bristle material: stainless steel

• Shape: cup brush

• Accessory length: approx. 51 mm

• Recommended maximum operating speed: 15 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Technical applications:

• Cleaning of corrosion-resistant metal surfaces such as stainless steel, aluminium and silver

• Removal of deposits, oxidation and contamination from metals, even in hard-to-reach areas

• Finishing and deburring of sheet metal, tubes or metal profiles

The Dremel 723 is a complete 100-piece multi-purpose accessory set designed for use with Dremel rotary multi-tools and other compatible tools with a 3.2 mm chuck. This kit of genuine accessories offers a wide range of components for cutting, sanding, grinding, polishing, cleaning and milling on materials such as wood, metal, plastic and more, making it ideal for DIY projects, workshop use and precision work (also ideal as a starter kit for getting started with the rotary tool).

• Detailed contents – Dremel 723 (100 pieces)

  Mandrels and basic bits

  • 1 × drill bit 150

  • 1 × screw mandrel 401

  • 1 × screw mandrel 402

  • 1 × EZ SpeedClic SC402 mandrel for SpeedClic discs

  Milling / Engraving

  • 1 × high-speed cutter 191

  Grinding stones

  • 1 × aluminium oxide grinding stone Ø 9.5 mm 932

  • 1 × aluminium oxide grinding stone Ø 9.5 mm 952

  • 1 × silicon carbide grinding stone Ø 4.8 mm 84922

  Cutting / grinding wheels and discs

  • 36 × cutting discs Ø 24 mm 409

  • 3 × EZ SpeedClic cutting discs for metal (SC456)

  • 10 × abrasive discs Ø 38 mm 411

  • 8 × abrasive discs Ø 38 mm 413

  Sanding / grinding with bands

  • 1 × sanding band mandrel Ø 6.4 mm + band 430

  • 4 × bands Ø 6.4 mm grit 60 431

  • 4 × bands Ø 6.4 mm grit 120 438

  • 1 × sanding band mandrel Ø 13 mm 407

  • 3 × bands Ø 13 mm grit 60 408

  • 4 × bands Ø 13 mm grit 120 432

  Cleaning / polishing

  • 10 × polishing wheels Ø 13 mm 414

  • 5 × polishing wheels Ø 26 mm 429

  • 1 × bristle brush Ø 19 mm 403

  • 1 × polishing compound 421

  Milling, engraving and detailed work

The Dremel Art. 636 is a drill bit set specifically for wood, designed for precision drilling in wood and similar materials with compatible rotary tools. Each bit features a centring point for a precise, straight start to the hole and a titanium coating for longer life and consistent performance.

Technical data:

• Type: wood drill bit set for rotary tools

• Model: 636

• Number of bits included: 4 pieces

• Working diameters: 3 mm, 4 mm, 5 mm, 6 mm

• Shank diameter: 3.2 mm (1/8″)

• Coating: titanium for long service life

• Centring point: yes, for accurate holes and a straight entry

• Recommended use: drilling in softwood, hardwood, laminate, plywood, chipboard and fibreboard

• Maximum recommended operating speed: up to 35 000 rpm

• Typical applications: precision drilling in wood, making holes from Ø 3 mm to Ø 6 mm, preparing joints, screw pilot holes and craft details

Set of 5 thin cutting discs for rotary tools with EZ SpeedClic fitting, designed for precise cuts in metal and metallic materials such as steel, aluminium and copper. The discs are reinforced and very thin to make cutting easier and reduce effort during the operation.

Technical data:

• Type: thin cutting discs EZ SpeedClic

• Model: SC409

• Quantity: 5 discs

• Working diameter: 38.0 mm

• Shank diameter: 3.2 mm

• Max working depth: 14.0 mm

• Disc thickness: 0.75 mm (extra thin)

• Mounting system: EZ SpeedClic – quick tool-free change

• Maximum recommended speed: up to 35,000 rpm

• Material: fibreglass-reinforced abrasive (for long-lasting cuts)

• Use: cutting and parting of sheet metal and thin metal workpieces

The Dremel 8215 is an aluminium oxide grinding stone designed for grinding, deburring and sharpening on metals and other hard surfaces. The cylindrical shape and large diameter make this accessory suitable for general work, burr removal, smoothing welded joints and finishing on tapered or flat surfaces.

Technical data:

• Type: aluminium oxide grinding stone for general grinding, deburring and sharpening

• Model: 8215

• Working diameter: 25.4 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 40 mm

• Abrasive material: aluminium oxide

• Shape: cylindrical

• Recommended maximum operating speed: up to approx. 20 000 rpm (varies depending on the material)

• Compatibility: rotary tools fitted with a chuck for 3.2 mm accessories (Dremel series and compatible tools)

Technical applications: smoothing, deburring and sharpening of metals, removal of burrs from castings, smoothing welded joints, removal of rivets and rust.

The Dremel 615 is a high-speed steel (HSS) router bit designed for compatible rotary tools, intended for rounding edges and chamfering corners on wood or similar materials. This accessory is ideal for decorative work, profile finishing and detail cuts on wood and soft materials.

Technical data:

• Type: router bit / bit for rounding corners on wood and soft materials

• Model: Item 615

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm

• Total accessory length: approx. 37 mm

• Material: high-speed steel (HSS)

• Recommended maximum operating speed: up to 35 000 rpm

• Guide pin: present, for stability and cutting precision

• Tool compatibility: Dremel rotary multi-tools with a 3.2 mm chuck or router attachment (e.g. 231 or 335)

Technical applications:

• Rounding and chamfering of edges and corners on wood

• Decorative cuts and finishing on panels and edges

• Detail work on soft materials such as wood, plywood, laminates, plastic and perspex

The Dremel 199 is a high-speed cutter (carving/engraving bit) of 9.5 mm for rotary tools, designed for carving, engraving, grooving and material removal in detail work on various materials. It is a versatile accessory for shaping, creating profiles and grooves or making tapered holes, ideal for precision work.

Technical data:

• Type: high-speed cutter for carving/engraving

• Model: 199 / 26150199JA

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~39 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Pack quantity:

• 1 × Dremel 199 cutter

Technical applications:

• Shaping and carving of wood, plastic, laminates and similar materials

• Creating grooves, profiles, hollows and tapered holes on flat or curved surfaces

• Engraving and decoration on soft materials

The Dremel 402JA is a mounting mandrel (screw pin) for rotary tools, designed for fixing cutting discs, polishing discs and other centre-hole accessories to Dremel multi-tools. It is one of the essential accessories for using various abrasive and finishing tools correctly with your multi-tool.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: Item 402JA

• Contents: normally 4 pieces in the pack

• Shank diameter: 3.2 mm (1/8″) – standard for Dremel tools

• Material: sturdy metal

• Shape: screw pin with slotted head

• Compatibility: all Dremel rotary multi-tools with 3.2 mm chuck

• Maximum operating speed: up to 35 000 rpm

• Use of the pin: for fixing cutting discs, polishing discs, brushes and other accessories with a centre hole

Main features:

• Allows secure mounting of abrasive and polishing discs on the Dremel tool.

• Slotted screw head for tightening/ loosening with a flat-blade screwdriver.

• Multi-pack, useful for having spares or quick replacements.

Technical applications:

• Fixing of abrasive cutting discs for metalworking.

• Mounting of polishing discs on felt or other backings.

• Assembly of various centre-hole accessories for a range of cutting and finishing applications.

The Dremel Art. 953 is a set of 3 aluminium oxide grinding stones for rotary tools, designed for grinding, deburring and sharpening on metal and ferrous materials. The conical components allow work on conical and curved surfaces and joints, delivering effective finishes and controlled material removal.

Technical data:

• Model: 953

• Quantity: 3 grinding stones per pack

• Abrasive material: aluminium oxide

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 40 mm

• Shape: conical / versatile for curved surfaces

• Applications: smoothing, deburring and sharpening on metal, castings, welded joints, rivets and rust removal

• Maximum operating speed: up to 25,000 rpm

• Compatibility: rotary tools that accept accessories with a 3.2 mm shank

Typical use:

• Removal of burrs from cuts in metal

• Smoothing of welded joints and castings

• Sharpening of tools and metal edges

• Removal of rivets and rust on ferrous surfaces

The Dremel 4486 is a keyless self-tightening chuck for rotary tools, designed to allow quick and easy accessory changes without the use of collets or tightening spanners. Thanks to the direct grip (keyless) system, it is particularly useful when bits, grinding wheels, brushes or other accessories with shanks from 0.8 mm to 3.2 mm need to be changed frequently.

Technical data:

• Type: keyless self-tightening chuck

• Model: 4486

• Accessory acceptance range: 0,8 – 3.2 mm (shank)

• Clamping type: keyless (quick grip without collet)

• Material: sturdy steel/metal alloy

• Accessory length: 15.0 mm

• Width: 15.0 mm

• Height: 22.0 mm

• Maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools with standard chuck and 0,8 – 3.2 mm accessories; can also be used with the 225 flexible shaft and the 575 right angle attachment.

Main features:

• Quick clamping of accessories without collets or pliers.

• Accepts bits, grinding wheels, brushes and other accessories with a small shank in a single solution.

• Ideal for work requiring numerous accessory changes.

Technical applications:

• Quick change of drill bits and milling cutters during drilling and milling.

• Fitting of cutting discs, grinding wheels and brushes for cutting, sanding or cleaning operations.

• Use with light accessories where fast changing without tools is required.

The Dremel 542 is a carbide cutting and shaping disc for rotary tools, designed specifically for cutting, shaping and sanding wood and similar materials such as laminates and fibreboard. The carbide coating ensures longer life and wear resistance when working on hard or soft wood, and also allows grooves and profiles to be made with precision.

Technical data:

• Type: cutting/shaping disc for wood with carbide coating

• Model: Item 542

• Working diameter: 25.4 mm

• Shank diameter: 3.2 mm

• Max. cutting depth: 9.0 mm

• Maximum recommended speed: up to 35 000 rpm

• Workable materials: hard and soft wood, chipboard, plywood, laminates and wood fibreboard

• Compatibility: Dremel rotary tools with 3.2 mm shank

• Pack quantity: 1 disc

Technical applications:

• Cutting and sectioning of wood and wood panels

• Shaping and creating grooves in wooden materials

• Light sanding while cutting thanks to the abrasive carbide coating

The Dremel 7105 is a spherical diamond bit for rotary tools, designed for engraving, sculpting, shaping and material removal on hard or abrasive surfaces. This accessory has a coating of diamond particles that increase its resistance and effectiveness on materials that are difficult to work.

Technical data:

• Type: diamond bit for engraving / carving on hard materials

• Model: 7105

• Shank diameter: 3.2 mm

• Working diameter: 4.4 mm

• Accessory length: approx. 46 mm

• Material: steel with diamond coating for greater hardness and durability

• Shape: spherical bit / diamond disc

• Recommended operating speed: up to approx. 25 000–35 000 rpm (do not exceed the maximum values indicated)

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck; does not require an additional chuck

Technical applications:

• Fine engraving and carving on glass, ceramic, porcelain, semi-precious stones

• Shaping and material removal on hardened and hard metals

• Detailed work on wood and other materials that are difficult to work with standard tools

The Dremel 84922JA is a set of silicon carbide abrasive points for rotary tools with a standard 3.2 mm shank. These small conical points are designed for grinding, deburring and engraving on hard or non-ferrous materials where traditional aluminium oxide points are less effective.

Technical data:

• Type: silicon carbide abrasive points for grinding and deburring

• Model: 84922JA

• Pack quantity: set of 3 pieces

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm

• Shape: small cone for access to surfaces and details

• Abrasive material: silicon carbide, more durable than aluminium oxide points

• Accessory length: approx. 40 mm

• Recommended maximum operating speed: up to 25 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a chuck for 3.2 mm accessories

Technical applications:

• Grinding and deburring of hard and brittle materials such as glass, ceramic, porcelain, stone and non-ferrous metals

• Engraving and material removal on uneven surfaces

• Preparation of complex surfaces before finishing

The Dremel 482 is a clamping collet for Dremel rotary tools, designed to hold securely bits and accessories with a thin 1.6 mm (≈ 1/16") shank. This type of collet ensures a secure grip of the accessory in the chuck, improving precision and stability during drilling, milling, engraving or other detail operations. It is part of the range of interchangeable collets used to adapt the tool to different accessory diameters.

Technical data:

• Type: clamping collet for rotary tools

• Model: Item 482

• Supported shank diameter: 1.6 mm (≈ 1/16″) (for accessories with a thin shank)

• Material: hard-wearing metal for a secure grip

• Compatibility: Dremel rotary tools with standard chuck (including use with flexible shaft)

• Use: secures the accessory in the chuck for precision work

• Installation: fits into the chuck and is tightened with the multi-tool's clamping nut

Technical applications:

• Holding 1.6 mm bits for drilling, engraving, milling or sanding on materials such as wood, metal or plastic.

• Improves stability and control in detail and precision applications.

The Dremel 8153 is a cylindrical aluminium oxide grinding stone designed for rotary tools with a 3.2 mm shank fitting, ideal for grinding, deburring and sharpening on a wide range of metallic materials and alloys. The shape and dimensions of the abrasive body also allow it to work effectively on tapered surfaces and irregular profiles.

Technical data:

• Type: grinding stone for general grinding and deburring on metal and ferrous materials.

• Model: 8153.

• Quantity: 1 piece.

• Abrasive material: aluminium oxide.

• Shape: cylindrical.

• Working diameter: 4.8 mm.

• Shank diameter: 3.2 mm.

• Accessory length: approx. 38 mm.

• Recommended maximum operating speed: up to 25 000 rpm.

• Compatibility: for use with Dremel rotary multi-tools and other compatible tools with a 3.2 mm chuck.

Technical applications:

• Sharpening of blades, drill bits and cutting tools.

• Deburring and smoothing of welded joints and castings.

• Removal of rivets, rust and excess material on metal.

• Preparation of metal surfaces before finishing.