DREMEL ACCESSORY 520 IMPREGNATED POLISHING PAD

The Dremel 462 is an impregnated rubber polishing point, designed for use with rotary multi-tools. This accessory is intended to remove light scratches, burrs and machining marks on ferrous metals and other materials, giving a smoother finish after grinding or sanding operations.

Technical data:

• Type: rubber point for polishing and finishing

• Model: Item 462

• Working diameter: approx. 6.4 mm

• Shank diameter: 3.2 mm

• Overall length: approx. 51 mm

• Material: rubber impregnated with polishing abrasive

• Recommended maximum operating speed: up to 30 000 rpm

• Quantity: 1 piece (variants and kits with several points available)

• Shape: conical/cylindrical for detail work and flat surfaces

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Technical applications:

• Removal of machining scratches on ferrous metal surfaces

• Polishing and finishing of metal and similar materials after material removal

• Cleaning of grooves and hard-to-reach details

The Dremel 431 is a set of replacement abrasive sanding bands for rotary tools, designed for sanding, shaping and removing material on a variety of surfaces. These 60 grit bands provide a medium-coarse abrasive action, suitable for finishing and surface preparation before further work.

Technical data:

• Type: abrasive bands / cylinders for sanding and shaping

• Model: Item 431

• Working diameter: 6.4 mm

• Abrasive grit: 60 (medium-coarse)

• Shank diameter: 3.2 mm (standard for rotary tools)

• Accessory length: approx. 13 mm

• Band width: ~9 mm

• Material: aluminium oxide abrasive

• Maximum operating speed: up to 35 000 rpm

• Pack quantity: typically a set of 6 bands

• Compatibility: used with mandrel 430 or equivalent for abrasive bands on rotary tools

Technical applications:

• Sands and shapes wood, plywood and composite panels

• Removal of rust and oxidation from metal surfaces

• Shaping of rubber, plastic and fibreglass surfaces

• Surface preparation before painting or further finishing

The Dremel 2615MS51JA is a set of multi-purpose blades for the Dremel Moto‑Saw (MS20) jigsaw, designed for straight and curved cuts in wood and plastic. The blades, with 6 teeth per centimetre, offer a good compromise between feed speed and cutting precision, making them suitable for general cutting of light to medium materials.

Technical data:

• Type: serrated blades for Moto‑Saw jigsaw

• Model: 2615MS51JA

• Compatibility: Dremel Moto‑Saw (MS20‑1/5)

• Quantity per pack: 5 pieces

• Overall blade length: 100 mm

• Cutting depth: 18 mm

• Teeth per centimetre: 6 TPI (≈ 6 teeth/cm)

• Blade width: 4.0 mm

• Blade thickness: 0.4 mm

• Blade depth: 2.5 mm

Technical applications:

• Straight and curved cutting in softwood and hardwood, chipboard, laminates and plywood.

• Cutting and finishing of plastic and similar materials for profiling or joints.

The Dremel 537 accessory is a brass brush for rotary tools designed for cleaning and surface finishing of relatively soft and delicate metals, ideal for removing oxidation and residues and for creating a satin or matt finish without scratching the surface. The brass bristles are non‑sparking and softer than steel, reducing the risk of damaging sensitive materials.

Technical data:

• Type: brass brush for cleaning/polishing

• Model: 537

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Bristle material: brass (wire brass)

• Shape: rotary brush

• Accessory length: approx. 48 mm

• Maximum operating speed: 15 000 rpm

• Compatibility: rotary tools with 3.2 mm shank (Dremel and compatible)

Technical applications:

• Cleaning of soft metal surfaces such as gold, bronze, copper and brass without generating sparks

• Surface finishing to achieve a satin or matt effect

• Removal of oxidation and residues from joints or hard-to-reach points

• Surface preparation before further machining or fine polishing

The TR 615 cutter is an accessory for Dremel TRIO tools designed specifically for rounding and shaping corners and edges on soft materials such as wood, plastic, rubber and Plexiglas. The tool produces rounded profiles and softer finishes on surfaces of small craft projects and detail work.

Technical data:

• Type: edge-rounding cutter

• Model: TR 615

• Working diameter: 9.5 mm

• Shank diameter: 4.8 mm

• Recommended materials: hardwood, softwood, rubber, plastic, Plexiglas, carbon

• Compatibility: dedicated accessory for Dremel TRIO (not suitable for traditional multi-tools without a TRIO adapter)

• Shape: rounded profile for chamfering and finishing corners

The Dremel 2615MS52JA is a set of 5 fine-tooth serrated blades for the Dremel Moto‑Saw (MS20) jigsaw, designed for detailed and precise cuts in wood and similar materials such as plastic or laminates. The blades have a profile with 7 teeth per centimetre to ensure clean, controlled cuts, even in curves and complex profiles.

Technical data:

• Type: serrated blades for jigsaw

• Model: 2615MS52JA

• Compatibility: Dremel Moto‑Saw (MS20‑1/5)

• Quantity per pack: 5 pieces

• Blade diameter / thickness: 0.2 mm

• Overall length: 100 mm

• Cutting depth: 12 mm

• Number of teeth: 7 teeth/cm (≈ fine grain)

• Material applications: softwood and hardwood, plywood, laminates, plastic and similar soft materials

Technical applications:

• Precise, controlled cutting of wood and boards

• Creating curves, profiles and details in light materials

• Shaping and finishing work on plastic materials

The Dremel 482 is a clamping collet for Dremel rotary tools, designed to hold securely bits and accessories with a thin 1.6 mm (≈ 1/16") shank. This type of collet ensures a secure grip of the accessory in the chuck, improving precision and stability during drilling, milling, engraving or other detail operations. It is part of the range of interchangeable collets used to adapt the tool to different accessory diameters.

Technical data:

• Type: clamping collet for rotary tools

• Model: Item 482

• Supported shank diameter: 1.6 mm (≈ 1/16″) (for accessories with a thin shank)

• Material: hard-wearing metal for a secure grip

• Compatibility: Dremel rotary tools with standard chuck (including use with flexible shaft)

• Use: secures the accessory in the chuck for precision work

• Installation: fits into the chuck and is tightened with the multi-tool's clamping nut

Technical applications:

• Holding 1.6 mm bits for drilling, engraving, milling or sanding on materials such as wood, metal or plastic.

• Improves stability and control in detail and precision applications.

The Dremel Art. 425 is a pressed felt polishing disc designed for rotary tools, ideal for achieving glossy, refined finishes on metals and plastic materials. It is intended for use with polishing compound and other polishing discs to obtain a brilliant result on machined surfaces.

Technical data:

• Type: felt polishing disc for rotary tools

• Model: Art. 425

• Working diameter: 22.5 mm (≈ 2.25 cm)

• Shank diameter: 3.2 mm (standard mandrel)

• Material: abrasive polishing felt

• Shape: circular disc

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

• Recommended maximum operating speed: up to approx. 20 000 rpm

• Mounting: by means of a mandrel/clamp suitable for polishing wheels

Technical applications:

• Polishing of metal surfaces such as steel, brass, copper, aluminium and stainless steel for a brilliant effect.

• Surface finishing of hard plastics after grinding and sanding.

• Use with polishing compound to obtain a higher level of shine on machined surfaces.

The 196 is a 3.2 mm high-speed ball cutter (carving/engraving bit) for rotary tools, designed for engraving, shaping and removing material in detail operations on wood, plastic and similar materials. Ideal for precision work, creating grooves and profiles, or making holes and hollows in curved or flat surfaces.

Technical data:

• Type: high-speed ball carving/engraving cutter

• Model: 194 / 26150194JA

• Working diameter: 3.2 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 1 × Dremel cutter 194

Technical applications:

• Engraving, shaping and modelling of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and holes on flat or curved surfaces

• Decoration and detail work on soft materials

The Dremel 26150201JA is a set of replacement soldering tips designed for use with the Dremel VersaTip 2000 and VersaFlame 2200 gas torches/soldering irons. This accessory allows you to carry out precision soldering work, and to heat, melt or join thin metals and components in detail applications.

Technical data:

• Type: replacement soldering tips

• Model: 26150201JA

• Pack quantity: 2 pieces

• Tool compatibility: Dremel VersaTip 2000 and Dremel VersaFlame 2200 (gas soldering irons)

• Use: precision soldering on thin metals and small joints

• Tip material: heat-resistant metal

Technical applications:

• Soldering of small or thin metal components

• Detail repairs on metal objects

• DIY applications and finishing work with gas soldering irons

The Dremel 615 is a high-speed steel (HSS) router bit designed for compatible rotary tools, intended for rounding edges and chamfering corners on wood or similar materials. This accessory is ideal for decorative work, profile finishing and detail cuts on wood and soft materials.

Technical data:

• Type: router bit / bit for rounding corners on wood and soft materials

• Model: Item 615

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm

• Total accessory length: approx. 37 mm

• Material: high-speed steel (HSS)

• Recommended maximum operating speed: up to 35 000 rpm

• Guide pin: present, for stability and cutting precision

• Tool compatibility: Dremel rotary multi-tools with a 3.2 mm chuck or router attachment (e.g. 231 or 335)

Technical applications:

• Rounding and chamfering of edges and corners on wood

• Decorative cuts and finishing on panels and edges

• Detail work on soft materials such as wood, plywood, laminates, plastic and perspex

The item 192 is a 4.8 mm high-speed tapered cutter (carving/engraving bit) for rotary tools, designed for shaping, engraving and removing material in precision work on wood, plastic and similar materials. Ideal for creating grooves, profiles, hollows and small tapered holes on flat or curved surfaces.

Technical data:

• Type: high-speed tapered carving/engraving cutter

• Model: 192 / 26150192JA

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 2 × item 192

Technical applications:

• Shaping and engraving of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small tapered holes

• Detail work and decoration on soft materials

The Dremel 439 is a replacement abrasive cylinder for rotary tools, used in combination with the mandrel and abrasive band to sand, shape and finish various types of surface. The medium grit makes it suitable for material removal and shaping on wood, metal, fibreglass, rubber and other similar materials.

Technical data:

• Type: abrasive cylinder for sanding/shaping

• Model: Item 439

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary tools)

• Abrasive grit: approx. 60 (medium)

• Material: abrasive on rotating cylinder

• Shape: abrasive cylinder

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding and material removal on wood, plywood and fibreglass

• Removal of rust or light oxidation from metal surfaces

• Shaping of profiles and surfaces on materials such as rubber and plastic

• Surface preparation before finishing or painting

The Dremel TR 408 is a set of 4 abrasive cylinders for the TRIO system, designed for rough shaping and sanding of multiple surfaces such as wood, metal, plastic and composite materials. These cylinders are intended for use with Dremel TRIO tools, offering a practical solution for removing material and preparing surfaces before refining or finishing.

Technical data:

• Accessory model: TR 408

• Type: abrasive cylinders for coarse sanding

• Quantity per pack: 4 pieces

• Working diameter: 13.0 mm

• Grit: 60 ( medium / coarse abrasive )

• Compatibility: dedicated accessory for Dremel TRIO tools (not compatible with standard rotary multi-tools)

• Applicable materials: wood, fibreglass, soft metal, rubber, plastic and other similar materials

The Dremel 535 is a stiff-wire steel brush for rotary tools, designed for removal of rust, oxidation, old paint and surface deposits from metals and hard surfaces. The circular construction with steel bristles provides aggressive and effective cleaning while maintaining control and precision in detail work.

Technical data:

• Type: circular steel brush for cleaning and deburring

• Model: 535

• Working diameter: approx. 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary multi-tools)

• Bristle material: tempered steel

• Shape: circular “brush-type” brush

• Overall accessory length: approx. 48 mm

• Recommended maximum operating speed: up to 15 000 – 20 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Typical applications:

• Removal of rust and oxidation from metal surfaces

• Cleaning of ferrous parts before painting or welding

• Deburring and finishing of metal joints

• Surface preparation of hard metal materials

• Rough polishing of surfaces after abrasive machining