Eagle Orange 70: SIT timing belt with 14 mm pitch and 70 mm width, quiet and slip-free, with a stated efficiency of 98 per cent. Lengths from 1,120 to 3,920 mm selectable among the variants.
Power Transmission
There are 167 products.
SIT Eagle Purple 64 belt, P type of the Silent Sync / Eagle range: 8 mm pitch, 64 mm width, staggered helical tooth and aramid cords. Lengths from 720 to 1,600 mm among the variants.
SIT Eagle Red 105 timing belt, Silent Sync series: 14 mm pitch, 105 mm width, staggered helical teeth in HNBR rubber with aramid cords. Lengths from 1,260 to 3,920 mm selectable among the variants.
SIT Eagle White 32 (Silent Sync): synchronous timing belt with 8 mm pitch and 32 mm width, 5.3 mm thickness. Staggered helical tooth, HNBR rubber, lengths from 640 to 2,400 mm among the variants.
Eagle Yellow 16: SIT timing belt with 8 mm pitch and 16 mm width, quiet and slip-free, with a stated efficiency of 98 per cent. Lengths from 640 to 2,400 mm selectable among the variants.
SIT joint for perforated V-belt: it joins the ends of belts sold by the metre and allows fitting without removing the pulleys. Sections Z, A, B and C.
Galvanised module 4 rack with a 30 x 12 mm section, 1 metre long, for sliding gates. It couples with the pinions of gate motors with module 4 and is assembled to cover the travel.
Galvanised module 4 rack with a 22 x 22 mm section, 2 metres long, for sliding gates. It is matched with the pinions of gate motors with module 4 and is assembled to cover the travel.
Jackson item no. 565 mechanical joint for conveyor belts: six sizes, from number 15 to 45, selectable among the variants according to the belt thickness.
SIT module 1 gear ring with 75 teeth, toothing for direct meshing with pinions and racks of the same module. Item No. ITCM100, brand SIT. Single version of the wheel, with no size variants to choose.
SIT module 1.5 gear ring with 75 teeth, toothing for direct meshing with pinions and racks of the same module. Item No. ITCM1500, brand SIT. Single version of the wheel, with no size variants to choose.
SIT module 1.5 toothed wheel for meshing with wheels of the same module; the number of teeth is selected among the variants. Item No. ITPM1500, brand SIT, for gear drives.
SIT module 2.5 toothed wheel for meshing with wheels of the same module; the number of teeth is selected among the variants. Item No. ITPM2500, brand SIT, for gear drives.
SIT module 3 toothed wheel for meshing with wheels of the same module; the number of teeth is selected among the variants. Item No. ITPM300, brand SIT, for gear drives.
SIT module 4 toothed wheel for meshing with wheels of the same module; the number of teeth is selected among the variants. Item No. ITPM400, brand SIT, for gear drives.
SIT module 5 toothed wheel for meshing with wheels of the same module; the number of teeth is selected among the variants. Item No. ITPM500, brand SIT, for gear drives.
SIT module 2 toothed wheel for meshing with wheels of the same module; the number of teeth is selected among the variants. Item No. ITPM200, brand SIT, for gear drives.
Single-roller offset link for H-pitch chains with a single row of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
Single-roller offset link for ASA-pitch chains with two rows of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
Single-roller offset link for ASA-pitch chains with a single row of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
Single-roller offset link for ASA-pitch chains with three rows of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
Single-roller offset link for UNI-pitch chains with two rows of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
Single-roller offset link for UNI-pitch chains with a single row of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
Single-roller offset link for UNI-pitch chains with three rows of rollers: used to adjust and close the length. The available pitches are chosen among the variants.
The perforated V-belt is a standard section V‑belt intended for customisable industrial and mechanical applications. Thanks to the regular holes along the back and the dedicated joints, the belt can be made to any length and is sold by the metre, so that it fits any plant or transmission system perfectly.
SIT 1" double sprocket for roller chains to DIN 8187 and ISO/R 606, from the ES Elitesystem series: pitch 1" (25.4 mm), with two rows of teeth. Number of teeth: from 13 to 54 teeth.
SIT 1" single sprocket, a toothed wheel with one row of teeth for single roller chain to ISO/R 606. Pitch 25.4 mm, from 11 to 75 teeth: the choice is made among the variants.
SIT 1" triple sprocket for ISO/R 606 roller chain: a toothed wheel with a pitch of 25.4 mm and three rows of teeth. A version of the ES Elitesystem ISO series, with the number of teeth among the variants.
SIT 1 1/2" double sprocket: an ISO/R 606 toothed wheel with two rows of teeth and a pitch of 1 1/2" (38.1 mm), to be matched with DIN 8187 roller chain. Number of teeth selectable among the variants.
SIT 1 1/2" single sprocket for roller chains to DIN 8187 and ISO/R 606, from the ES Elitesystem series: pitch 1 1/2" (38.1 mm), with one row of teeth. Number of teeth: from 9 to 45 teeth.
SIT 1 1/2" triple sprocket, a toothed wheel with three rows of teeth for triple roller chain to ISO/R 606. Pitch 38.1 mm, 10 teeth: the choice is made among the variants.
SIT 1 1/4" double sprocket for ISO/R 606 roller chain: a toothed wheel with a pitch of 31.75 mm and two rows of teeth. A version of the ES Elitesystem ISO series, with the number of teeth among the variants.
SIT 1/2" double sprocket: an ISO/R 606 toothed wheel with two rows of teeth and a pitch of 1/2" (12.7 mm), to be matched with DIN 8187 roller chain. Number of teeth selectable among the variants.
SIT 1/2" single sprocket for roller chains to DIN 8187 and ISO/R 606, from the ES Elitesystem series: pitch 1/2" (12.7 mm), with one row of teeth. Number of teeth: from 11 to 62 teeth.
SIT 1/2" triple sprocket, a toothed wheel with three rows of teeth for triple roller chain to ISO/R 606. Pitch 12.7 mm, 38 teeth: the choice is made among the variants.
SIT 3/4" double sprocket for ISO/R 606 roller chain: a toothed wheel with a pitch of 19.05 mm and two rows of teeth. A version of the ES Elitesystem ISO series, with the number of teeth among the variants.
SIT single sprocket with a single row of teeth for roller chain, 3/4 inch pitch (19.05 mm), standard DIN 8187 - ISO/R 606, series 12B-1. Sizes selectable among the variants. Item No. ITC34S00.
