Dremel 426 cutting disc, item no. 2615042632, pack of 5: fibreglass-reinforced, aluminium oxide abrasive, 32 mm diameter, cutting depth up to 14 mm, 35,000 rpm, to be fitted on the 402 mandrel.
Tools
There are 2848 products.
Dremel 429 felt polishing wheel, item no. 26150429JA, pack of 3: the largest cylindrical wheel in the range, 26 mm diameter, up to 20,000 rpm, to be fitted on the 401 threaded mandrel. For polishing metals and plastics.
Dremel 430 abrasive cylinder and mandrel, item no. 26150430JA, 2 pieces: grit 60 aluminium oxide band, working diameter 6.4 mm, 3.2 mm shank, up to 35,000 rpm. For sanding wood and fibreglass and removing rust from metal.
Dremel 431 replacement abrasive bands, item no. 2615043132, pack of 6: grit 60 aluminium oxide, working diameter 6.4 mm, for the Dremel 430 mandrel, up to 35,000 rpm. For wood, fibreglass and rust on metal.
Dremel 432 replacement abrasive bands, item no. 2615043232, pack of 6: grit 120 aluminium oxide, working diameter 13 mm, for Dremel 407 or EZ407SA mandrels, up to 35,000 rpm. For sanding wood, plastic and fibreglass.
Dremel 438 replacement abrasive bands, item no. 2615043832, pack of 6: grit 120 aluminium oxide, working diameter 6.4 mm, for the Dremel 430 mandrel, up to 35,000 rpm. For precise sanding of wood and plastic.
Genuine Dremel accessory no. 439 for the brand's rotary tools. Manufacturer's data sheet not available: type, size, grit and number of pieces must be confirmed with the shop before purchase.
Dremel 482 collet, code 2615000482, for accessories with a 1.6 mm (1/16") shank: thin aluminium tube, recognisable by the 2 rings on the handle. Available individually or in the Dremel 4485 collet kit.
Dremel 536 brass cup brush, item no. 26150536JA, pack of 2: working diameter 13 mm, 3.2 mm shank, up to 15,000 rpm. For cleaning and finishing gold, bronze, copper and brass without scratching them, with a satin or matt finish.
Dremel 537 brass pen brush, item no. 26150537JA, pack of 3: working diameter 3.2 mm, 3.2 mm shank, up to 15,000 rpm. For cleaning soft metals such as gold, bronze and copper, even in the narrowest crevices.
Dremel 615 HSS high-speed steel router bit, item no. 2615061532, with pilot for rounding edges: 3.2 mm shank, length 37 mm, up to 35,000 rpm. For table, drawer and cabinet edges and small mouldings.
Dremel 640 HSS high-speed steel router bit, item no. 2615064032, for V-grooves: working diameter 6.4 mm, 3.2 mm shank, up to 35,000 rpm. For inlays, chamfered edges, decorative carving and lettering in wood.
Dremel 652 straight router bit, item no. 2615065232, in HSS steel: working diameter 4.8 mm, 3.2 mm shank, length 36 mm, up to 35,000 rpm. For grooves, slots, inlays and mortises in wood and soft materials.
Dremel 654 straight router bit, item no. 2615065432, in HSS steel: working diameter 6.4 mm, 3.2 mm shank, length 36 mm, up to 35,000 rpm, 1 piece. For beading, slots, inlays and mortises in wood and soft materials.
Dremel 7105 diamond ball point, item no. 26157105JA, pack of 2: working diameter 4.4 mm, 3.2 mm shank, length 46 mm, up to 25,000 rpm. For engraving glass, ceramic, brick and hardened steel.
Dremel 7144 conical diamond point, item no. 26157144JA, pack of 2: working diameter 2.4 mm, 3.2 mm shank, length 46 mm, up to 25,000 rpm. For detailed engraving on glass, ceramic, jade and hardened steel.
Dremel 9903 tungsten carbide burr, item no. 2615990332: cylindrical shape with rounded end, diameter 3.2 mm, length 39 mm, up to 30,000 rpm. For shaping and grinding hardened steel, stainless steel, cast iron and ceramic.
Dremel 9905 ball-nose tungsten carbide burr, item no. 2615990532: working diameter and shank 3.2 mm, up to 30,000 rpm, 1 piece. For engraving and carving hardened steel, stainless steel, cast iron, ceramic and hardwood.
Dremel 9910 tungsten carbide burr with lanceolate point, item no. 2615991032: tapered end, diameter 3.2 mm, length 39 mm, up to 30,000 rpm, 1 piece. For engraving and carving hard metals, ceramic and wood.
Dremel 9911 tungsten carbide burr with oval point, item no. 2615991132: small pine-cone shaped point with tapered end, diameter 3.2 mm, length 39 mm, up to 30,000 rpm. For engraving and carving hard materials.
Dremel EZ SpeedClic SC409 thin cutting discs, item no. 2615S409JB, pack of 5: diameter 38 mm, thickness 0.75 mm, cutting depth up to 14 mm, 35,000 rpm. For cutting sheet steel, aluminium and metal tubes.
Dremel EZ SpeedClic SC411 abrasive discs, item no. 2615S411JA, pack of 6: diameter 30 mm, grit 60, silicon carbide abrasive, tool-free change. For sanding and shaping surfaces and edges of wood, plastic and fibreglass.
Dremel TR408 sanding bands, item no. 2615T408JA, pack of 4: grit 60, working diameter 13 mm, for shaping and sanding wood and fibreglass, removing rust from metal and shaping rubber. Accessory for Dremel Trio only.
Dremel TR562 cutting bit, item no. 2615T562JA, for ceramic wall tiles, plaster and cement boards: 4.8 mm shank, 3.2 mm working diameter. Accessory dedicated exclusively to the Dremel Trio tool.
Dremel TR615 corner rounding router bit, item no. 2615T615JA: 4.8 mm shank and 9.5 mm working diameter, for routing the edges of wood, plastic, rubber and Plexiglas. Fits the Dremel Trio tool only.
Dremel 225 flexible shaft, item 26150225JA: 1070 mm of shaft with a pen-style handpiece and a lock button, for engraving, polishing and carving in tight spaces. Compatible with Dremel 3000, 4250, 8240, 8250 and 3200 multi-tools.
Dremel 9929 diamond bit, item 26159929JA, for the Dremel 290 engraver: long-life diamond coating for engraving hard materials such as glass and stainless steel, suited to continuous use in hobby and DIY jobs.
Dremel 636 wood bit set, item no. 26150636JA: four bits of 3, 4, 5 and 6 mm with centring point, titanium coating and 3.2 mm shank, for precision drilling in wood and wood-based materials with the multi-tool.
Dremel Driver precision cordless screwdriver, item no. F0131120JA: 7.2 V 1.0 Ah lithium-ion battery, variable speed 0-300 rpm, weight 0.430 kg. The kit includes a charger and 8 bits, 2 of them hexagonal for assembling furniture.
Dremel 454 chain sharpening stones for chainsaws, item no. 26150454JA, pack of 3: aluminium oxide, diameter 4.8 mm, 3.2 mm shank and maximum speed of 30,000 rpm, for use with Dremel multi-tools.
Dremel 4485 collet kit with quick-change nut, item no. 2615448532, for Dremel multi-tools: four collets with identification rings on the shank and a recommended maximum speed of 35,000 rpm. Sizes to be confirmed: catalogue name and code do not match.
Dremel cordless multi-tool with variable speed, LED light, motor brake and EZ Twist accessory change. The name indicates the 12 V model 8220-2/45, the registered code the 10.8 V kit 8200-1/35: version and contents to be confirmed.
Dremel Moto-Saw MS53 metal blades, item 2615MS53JA, pack of 5: 10 teeth per centimetre, 100 mm length and 3 mm cutting depth, for cutting light sheet metal and soft metals with the Moto-Saw MS20.
Dremel 569 1.6 mm bit, item no. 2615056932, in carbide for removing grout from wall and floor joints: 30 degree angle, maximum 20,000 rpm. Used with the Dremel 568 attachment.
Dremel 570 3.2 mm bit, item no. 2615057032, in carbide for removing mortar from tile joints, suited to floors: 30 degree angle, maximum 20,000 rpm. Used with the Dremel 568 attachment.
Dremel 650 3.2 mm straight router bit, item no. 2615065032, in HSS high-speed steel: 3.2 mm shank, flat bottom, up to 35,000 rpm. For grooves, joints, inlays and mortises in wood and soft materials.
Dremel 290-1 engraver, item F0130290JM: 35 W, 230 V, 6,000 strokes per minute, adjustable engraving depth and replaceable carbide bit, with stencils for letters and numbers. Engraves metal, glass, wood, plastic and ceramic.
Dremel 3000 electric multi-tool, item F0133000JS: 130 W, 230 V, variable speed, EZ Twist quick accessory change, weight 0.55 kg. Kit contents to be confirmed: the code and EAN on record indicate two different packs.
Dremel Moto-Saw MS20-1/5 fretsaw, item no. F013MS20JA: 70 W, cutting depth 18 mm, variable speed and detachable frame for handheld use. With wood and metal blades, parallel guide and case.
Dremel Moto-Saw MS51 multi-purpose wood blades, item 2615MS51JA, pack of 5: 6 teeth per centimetre, 100 mm length and 18 mm cutting depth, for straight and curved cuts in wood and plastic with the Moto-Saw MS20.
