DREMEL ACCESSORY TR 615

The Dremel 426 is a fibreglass-reinforced abrasive cutting disc for rotary tools, designed for straight cuts and slots in metal and a variety of other materials. It offers greater strength and durability than basic discs, making it suitable also for harder metals and heavy-duty use compared with standard discs.

Technical data:

• Type: fibre-reinforced abrasive cutting disc

• Model: Art. 426

• Quantity: packs available of 1 or 5 discs (variants available)

• Working diameter: 32 mm

• Disc thickness: approx. 1.1 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Abrasive material: aluminium oxide with fibreglass reinforcement

• Maximum operating speed: up to 35 000 rpm

• Max cutting depth: approx. 14 mm

• Mounting: with screw mandrel (pin) type 402

• Use: cutting along the edge only of the disc

Workable materials:

• Ferrous and non-ferrous metals, including hardened steel, aluminium, copper, brass, stainless steel

• Thin wood, plastic, plasterboard, light marble and brick (short cuts)

Technical applications:

• Making straight cuts and slots in metal, sheet metal and sections

• Cutting bolts, screws or metal bars with control and precision

• Cuts in composite or plastic materials during repair or modification work

Set of 5 thin cutting discs for rotary tools with EZ SpeedClic fitting, designed for precise cuts in metal and metallic materials such as steel, aluminium and copper. The discs are reinforced and very thin to make cutting easier and reduce effort during the operation.

Technical data:

• Type: thin cutting discs EZ SpeedClic

• Model: SC409

• Quantity: 5 discs

• Working diameter: 38.0 mm

• Shank diameter: 3.2 mm

• Max working depth: 14.0 mm

• Disc thickness: 0.75 mm (extra thin)

• Mounting system: EZ SpeedClic – quick tool-free change

• Maximum recommended speed: up to 35,000 rpm

• Material: fibreglass-reinforced abrasive (for long-lasting cuts)

• Use: cutting and parting of sheet metal and thin metal workpieces

The Dremel 439 is a replacement abrasive cylinder for rotary tools, used in combination with the mandrel and abrasive band to sand, shape and finish various types of surface. The medium grit makes it suitable for material removal and shaping on wood, metal, fibreglass, rubber and other similar materials.

Technical data:

• Type: abrasive cylinder for sanding/shaping

• Model: Item 439

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary tools)

• Abrasive grit: approx. 60 (medium)

• Material: abrasive on rotating cylinder

• Shape: abrasive cylinder

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding and material removal on wood, plywood and fibreglass

• Removal of rust or light oxidation from metal surfaces

• Shaping of profiles and surfaces on materials such as rubber and plastic

• Surface preparation before finishing or painting

The Dremel 670 is a mini circular saw to attach to a Dremel rotary multi-tool, designed to make clean, straight cuts in wood and wood-like materials. It turns your multi-tool into a small portable saw with an integrated directional guide and a transparent guard for better visibility while cutting.

Technical data:

• Type: mini circular saw attachment for multi-tool

• Compatibility: suitable for Dremel models and other rotary tools compatible with the quick connect system

• Standard blade included: mini circular blade Ø 31.8 mm

• Maximum cutting depth: 6.35 mm

• Structure: angled base for perpendicular cuts with directional guide

• Transparent guard for visibility of the cutting area

• Attachment length: approx. 50 mm

• Overall width: approx. 90 mm

• Overall depth: approx. 45 mm

• Use: thin, precise cuts in wood, laminates and similar materials

The Dremel 530 accessory is a circular brush with stainless steel bristles for rotary multi-tools, designed for cleaning, deburring and surface polishing on corrosion-sensitive or delicate materials. The stainless steel bristles reduce the risk of oxidation after treatment and are also effective on flat surfaces and in hard-to-reach places.

Technical data:

• Type: circular stainless steel brush for rotary tools

• Model: 530

• Working diameter: 19.0 mm

• Shank diameter: 3.2 mm (1/8″)

• Overall length: approx. 44 mm

• Bristle material: stainless steel

• Shape: circular radial brush

• Recommended maximum operating speed: up to 15 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Technical applications:

• Cleaning and removal of oxidation from stainless steel, aluminium and non-ferrous metals

• Deburring of edges and joints on metal surfaces

• Surface finishing of silver, brass and copper parts

• Surface preparation before painting or further treatments

The Dremel 432 is a set of abrasive bands (abrasive cylinders) for rotary tools, designed for sanding, shaping and surface cleaning on different materials. The 120 grit aluminium oxide coating offers a good balance between material removal and finish, making these bands ideal for surface preparation and finishing.

Technical data:

• Type: abrasive bands/cylinders for abrasion and sanding

• Model: 432

• Working diameter: approx. 13 mm (½″)

• Abrasive grit: 120 (medium/fine)

• Shank diameter: 3.2 mm (standard for rotary tools)

• Maximum operating speed: up to ~35 000 rpm

• Quantity: normally sold in packs of several pieces (e.g. 6 bands)

• Compatibility: Dremel-type rotary tools with 3.2 mm mandrel

Technical applications:

• Sanding and shaping of wood surfaces and plywood

• Rust removal and cleaning of metal surfaces

• Shaping and finishing of rubber, fibreglass and plastic

• Surface preparation before painting or other finishing

The Dremel 196 is a high-speed cylinder cutter (carving/engraving bit) of 6.4 mm for rotary tools, designed for carving, shaping, grooving and material removal in detail work on wood, plastic and similar materials. It is ideal for shaping, creating profiles and precise engraving, offering optimum control in precision work.

Technical data:

• Type: high-speed cylinder cutter for carving/engraving

• Model: 196 / 26150196JA

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Pack quantity:

• 1 × Dremel 196 cutter

Technical applications:

• Shaping and carving of wood, plastic, laminates and similar materials

• Creating grooves, profiles, hollows and holes on flat or curved surfaces

• Engraving and decoration of soft materials

Dremel 108 engraving cutter is an engraving cutter/engraving bit with a cylindrical shape, 0.8 mm, designed for detail work with high-speed rotary tools. This tool allows you to carve, engrave, mill and create grooves with precision on materials such as wood, plastic, leather, rubber and soft metals, and is also suitable for curved or complex surfaces.

Technical data:

• Type: engraving cutter / engraving bit

• Model: 108 / 26150108JA

• Working diameter: 0.8 mm (approx. 1/32 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Material: high-speed steel / hardened steel for general use

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutters 0.8 mm

Technical applications:

• Engraving, shaping and material removal on wood, plastic, laminates, fibreglass and soft metals

• Creation of grooves, profiles, tapered holes and details on flat or curved surfaces

• Ideal for precision work, decoration and artistic carving on soft materials

The Dremel 7144 is a conical/pointed diamond bit for rotary tools, designed for engraving, carving, touching up and precision finishing on hard materials. It offers high performance even on surfaces that are difficult to machine thanks to its coating of diamond particles, which ensures rapid material removal and a long service life.

Technical data:

• Type: diamond bit for engraving and carving on hard materials

• Model: 7144

• Shank diameter: 3.2 mm (1/8″)

• Working diameter: 2.4 mm (3/32″)

• Total accessory length: approx. 46 mm

• Material: steel with diamond coating

• Maximum recommended operating speed: up to 25,000 rpm

• Shape: conical / taper bit for detail and precise engraving

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm accessory chuck

Typical applications: detailed engraving and carving on wood, ceramic, glass, hardened metal, semi-precious stones and other hard materials; creation of channels, grooves and fine finishes.

The Dremel 535 is a stiff-wire steel brush for rotary tools, designed for removal of rust, oxidation, old paint and surface deposits from metals and hard surfaces. The circular construction with steel bristles provides aggressive and effective cleaning while maintaining control and precision in detail work.

Technical data:

• Type: circular steel brush for cleaning and deburring

• Model: 535

• Working diameter: approx. 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary multi-tools)

• Bristle material: tempered steel

• Shape: circular “brush-type” brush

• Overall accessory length: approx. 48 mm

• Recommended maximum operating speed: up to 15 000 – 20 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Typical applications:

• Removal of rust and oxidation from metal surfaces

• Cleaning of ferrous parts before painting or welding

• Deburring and finishing of metal joints

• Surface preparation of hard metal materials

• Rough polishing of surfaces after abrasive machining

The Dremel 429 is a felt polishing disc for rotary multi-tools, designed to achieve polished finishes and smooth surfaces on a variety of materials, with or without polishing compounds. It is one of the largest accessories in the Dremel polishing range, suitable when a particularly bright or smooth surface is required.

Technical data:

• Type: felt polishing disc for rotary tools

• Model: 429

• Working diameter: 26.0 mm

• Shank diameter: 3.2 mm

• Material: abrasive polishing felt

• Shape: circular disc

• Recommended maximum operating speed: 20 000 rpm

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck

• Mounting: with threaded mandrel 401 (required for fitting)

Technical applications:

• Polishing and surface finishing of ferrous and non-ferrous metals

• Refining surfaces in plastics and composite materials

• Removal of light machining marks before final polishing

• Preparing surfaces before finishing or painting treatments

The Dremel 462 is an impregnated rubber polishing point, designed for use with rotary multi-tools. This accessory is intended to remove light scratches, burrs and machining marks on ferrous metals and other materials, giving a smoother finish after grinding or sanding operations.

Technical data:

• Type: rubber point for polishing and finishing

• Model: Item 462

• Working diameter: approx. 6.4 mm

• Shank diameter: 3.2 mm

• Overall length: approx. 51 mm

• Material: rubber impregnated with polishing abrasive

• Recommended maximum operating speed: up to 30 000 rpm

• Quantity: 1 piece (variants and kits with several points available)

• Shape: conical/cylindrical for detail work and flat surfaces

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Technical applications:

• Removal of machining scratches on ferrous metal surfaces

• Polishing and finishing of metal and similar materials after material removal

• Cleaning of grooves and hard-to-reach details

The Dremel 8193 is an aluminium oxide grinding stone for rotary tools, designed for grinding, deburring and general sharpening operations on a wide range of metallic materials. The cylindrical shape allows it to work effectively on tapered and irregular surfaces, making it suitable for the needs of workshops, DIY and mechanical / detail work.

Technical data:

• Type: aluminium oxide grinding stone for grinding and deburring

• Model: 8193

• Working diameter: 15.9 mm

• Shank diameter: 3.2 mm (1/8 in)

• Shape: cylindrical

• Abrasive material: aluminium oxide

• Accessory length: approx. 38 mm

• Recommended maximum operating speed: up to 35 000 rpm (indicative)

• Compatibility: rotary tools with an accessory chuck of 3.2 mm

Technical applications:

• Grinding and deburring on metal and ferrous materials

• Sharpening of cutting tools such as blades, chisels and drill bits

• Smoothing of welded joints, removal of rivets and rust

• Preparation and finishing of tapered or irregular surfaces

The Dremel TR 562 is a cutting accessory specific to Dremel TRIO tools, designed to make cuts in ceramic wall tiles, plasterboard and cement boards with precision and control. It is suitable only for use with the Dremel TRIO system and is not compatible with standard rotary multi-tools.

Technical data:

• Type: cutting bit for wall tiles/panels

• Model: TR 562

• Fitting: 4.8 mm shank (compatible with Dremel TRIO system)

• Working diameter: 3.2 mm

• Accessory length: approx. 52 mm (overall size)

Applications: cutting of ceramic wall tiles, plasterboard and cement boards; suitable for shaping and fitting around sockets, profiles or pipework during installations and renovations.

Item 111 is a small-diameter (0.8 mm) engraving cutter with an elongated cylindrical head, designed for extremely precise detail work with high-speed rotary tools. It allows engraving, shaping and material removal even on curved surfaces, making it suitable for carving and micro-machining operations on various materials such as wood, plastic, fibreglass, rubber and soft metals.

Technical data:

• Type: engraving cutter / cylindrical carving bit

• Model: 111 / 26150111JA

• Working diameter: 0.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Material: high-speed steel

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutter 111

Technical applications:

• Engraving, shaping and milling of details on wood, plastic, laminated materials and rubber

• Precision work, grooves, profiles and localised material removal

• Ideal on curved or irregular surfaces thanks to the elongated shape of the cutter

The Dremel SC402 pin mount is an EZ SpeedClic chuck designed for use with Dremel rotary tools and the EZ SpeedClic system, which allows accessories such as cutting discs and abrasive discs to be fitted and changed quickly without the use of spanners. This accessory makes changing elements faster than with a standard chuck and supports the high rotation speeds suited to multi-tools.

Technical data:

• Type: chuck / pin mount EZ SpeedClic

• Model: SC402

• Shank diameter: 3.2 mm

• Accessory length: 38 mm

• Maximum operating speed: 35,000 rpm

• Accessory change system: EZ SpeedClic – quick tool-free change (Pull–Twist–Release)

• Compatibility: Dremel rotary tools with SpeedClic fitting (for mounting specific discs and compatible accessories)