DREMEL ACCESSORY ART.615 (1 PCS)

The item 1453 is a complete sharpening kit for saws and chains, designed to keep blades and chains efficient and performing at their best. Ideal for precise and safe cutting, it extends chain life and ensures smooth, controlled cutting operations.

Technical data:

• Type: sharpening kit for saws and chains

• Model: 1453 / 261501453JA

• Compatibility: chainsaw chains of various brands

• Kit contents: round file, sharpening guide, positioning supports

• Material: hardened steel for files, tough plastic for supports

• Recommended use: regular chain maintenance for precise and safe cuts

Quantity in the pack:

• 1 × complete sharpening kit

Technical applications:

• Sharpening and maintenance of chainsaw chains

• Restoring the edge for clean, even cuts

• Preventive maintenance operations to extend chain life

The Dremel Art. 953 is a set of 3 aluminium oxide grinding stones for rotary tools, designed for grinding, deburring and sharpening on metal and ferrous materials. The conical components allow work on conical and curved surfaces and joints, delivering effective finishes and controlled material removal.

Technical data:

• Model: 953

• Quantity: 3 grinding stones per pack

• Abrasive material: aluminium oxide

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 40 mm

• Shape: conical / versatile for curved surfaces

• Applications: smoothing, deburring and sharpening on metal, castings, welded joints, rivets and rust removal

• Maximum operating speed: up to 25,000 rpm

• Compatibility: rotary tools that accept accessories with a 3.2 mm shank

Typical use:

• Removal of burrs from cuts in metal

• Smoothing of welded joints and castings

• Sharpening of tools and metal edges

• Removal of rivets and rust on ferrous surfaces

The Dremel 7120 is an oval disc diamond abrasive bit designed for Dremel-type rotary tools, specifically for engraving, shaping and removing material on hard or fragile surfaces. It is particularly suitable when precision work is needed on resistant materials such as glass, ceramic or hardened metal, where a traditional cutter would perform less well or wear out quickly.

Technical data:

• Accessory type: diamond bit / abrasive disc for finely detailed engraving and shaping

• Model: 7120

• Working diameter: approx. 6.7 mm

• Shank diameter: 2.4 mm (3/32″) standard Dremel

• Shape: oval diamond disc

• Material: steel with diamond coating

• Maximum recommended speed: up to 25 000 rpm (in some references up to 35 000 rpm)

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm accessory chuck

Technical applications:

• Engraving and shaping of hard surfaces such as glass, ceramic, porcelain

• Detail work on hardened metal and hard steels

• Precision work on thin materials or materials that are difficult to section

• Material removal with greater control than conventional abrasives

The Dremel 4485 is a collet kit with collet nut for Dremel series rotary tools, designed to hold a wide range of bits and accessories firmly with different shank diameters. The set lets you adapt the tool to the correct accessory size, ensuring a stable grip and reducing vibration or slipping during use. This accessory is a simple and versatile solution for anyone who frequently uses bits of different diameters on rotary multi-tools.

Technical data:

• Type: collet set with collet nut for rotary multi-tool

• Model: 4485

• Contents:

  • 1 × collet nut

  • 4 × collets of diameters: 0.8 mm, 1.6 mm, 2.4 mm, 3.2 mm

• Supported accessory diameter range: 0.8 mm – 3.2 mm

• Tool compatibility: Dremel rotary multi-tools (cordless and corded) with a chuck for traditional collets

• Recommended maximum speed: up to 35 000 rpm

• Material: sturdy metal for a stable grip and long operating life

• Installation: screws onto the front thread of the tool, and the collets are fitted to clamp the accessories

Technical applications:

• Precise clamping of bits, cutters, grinding wheels, brushes or other accessories in the supported diameters.

• Improves the stability and control of the accessory when working on wood, metal, plastic and other materials.

• Ideal for anyone who uses several tool diameters with the same rotary tool.

Single tungsten carbide cutter with a ball tip for rotary tools, designed for engraving, shaping and material removal on hard surfaces.
The spherical tip geometry allows concave channels, curves and rounded details to be produced with control and precision on a wide range of materials, including metal and difficult-to-machine materials.

Technical data:

• Type: tungsten carbide cutter for engraving/shaping

• Model: Art. 9905

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Accessory length: 38.0 mm (approx.)

• Material: tungsten carbide (C‑2)

• Tip shape: spherical (ball tip)

• Maximum recommended operating speed: up to 30 000 rpm

Technical applications:
Engraving, shaping of concave profiles, material removal and fine detailing on hardened steel, stainless steel, cast iron, ceramic, non-ferrous metals, hardwood or plastic.

The Dremel 401 is a mandrel (screw pin) for rotary tools, designed for mounting and securing polishing and cleaning accessories on Dremel multi-tools. It is particularly suitable for use with felt wheels and other accessories intended for finishing.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: 401

• Shank diameter: 3.2 mm (≈ 1⁄8″) standard for rotary tools

• Total length: approx. 39 mm

• Material: wear-resistant metal

• Shape: screw pin with threaded head for mounting accessories

• Maximum operating speed: up to 35 000 rpm

• Pack quantity: 3 pieces

• Compatibility: Dremel-type rotary tools and multi-tools with 3.2 mm chuck

Main features:

• Ergonomic mounting: threaded head that allows accessories such as felt wheels and polishing bits to be screwed on directly.

• Ease of use: robust and intuitive design for a quick accessory change.

• Versatility: used mainly with accessories intended for polishing and finishing.

Technical applications:

• Securing felt polishing wheels (e.g. models 414, 422, 429) for bright finishes on metals and plastics.

• Mounting polishing bits for surface finishing and precision in detail work.

The Dremel 570 is a tungsten carbide removal bit designed for Dremel-type rotary tools, specifically for removing mortar or cement in the joints between tiles during renovation or maintenance work. It is used with the Dremel 568 accessory (grout removal attachment) to keep the bit centred between the joints and ensure controlled feed.

Technical data:

• Type: tungsten carbide grout / mortar removal bit

• Model: Item 570

• Working diameter: 3.2 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 58 mm

• Useful working length: approx. 10 mm

• Material: tungsten carbide

• Recommended maximum speed: up to 20,000 rpm (typical use 15–20 000 rpm)

• Compatibility: used with Dremel rotary tools and with the grout removal attachment (mod. 568) for removing mortar between tiles

Technical applications:

• Controlled removal of mortar or cement in the joints between tiles before replacing or repairing broken tiles.

• Preparing joints for regrouting or resealing.

The item 192 is a 4.8 mm high-speed tapered cutter (carving/engraving bit) for rotary tools, designed for shaping, engraving and removing material in precision work on wood, plastic and similar materials. Ideal for creating grooves, profiles, hollows and small tapered holes on flat or curved surfaces.

Technical data:

• Type: high-speed tapered carving/engraving cutter

• Model: 192 / 26150192JA

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 2 × item 192

Technical applications:

• Shaping and engraving of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small tapered holes

• Detail work and decoration on soft materials

Main details:

• Type: pair of replacement brushes for Dremel rotary tool

• Item code: 0615298790 / UEB0615298790

• Application: replacement motor component for Dremel tools

• Dimensions: approx. 5 × 5.5 mm

• Function: replacement of worn brushes to restore motor performance

The Dremel TR 408 is a set of 4 abrasive cylinders for the TRIO system, designed for rough shaping and sanding of multiple surfaces such as wood, metal, plastic and composite materials. These cylinders are intended for use with Dremel TRIO tools, offering a practical solution for removing material and preparing surfaces before refining or finishing.

Technical data:

• Accessory model: TR 408

• Type: abrasive cylinders for coarse sanding

• Quantity per pack: 4 pieces

• Working diameter: 13.0 mm

• Grit: 60 ( medium / coarse abrasive )

• Compatibility: dedicated accessory for Dremel TRIO tools (not compatible with standard rotary multi-tools)

• Applicable materials: wood, fibreglass, soft metal, rubber, plastic and other similar materials

The Dremel 723 is a complete 100-piece multi-purpose accessory set designed for use with Dremel rotary multi-tools and other compatible tools with a 3.2 mm chuck. This kit of genuine accessories offers a wide range of components for cutting, sanding, grinding, polishing, cleaning and milling on materials such as wood, metal, plastic and more, making it ideal for DIY projects, workshop use and precision work (also ideal as a starter kit for getting started with the rotary tool).

• Detailed contents – Dremel 723 (100 pieces)

  Mandrels and basic bits

  • 1 × drill bit 150

  • 1 × screw mandrel 401

  • 1 × screw mandrel 402

  • 1 × EZ SpeedClic SC402 mandrel for SpeedClic discs

  Milling / Engraving

  • 1 × high-speed cutter 191

  Grinding stones

  • 1 × aluminium oxide grinding stone Ø 9.5 mm 932

  • 1 × aluminium oxide grinding stone Ø 9.5 mm 952

  • 1 × silicon carbide grinding stone Ø 4.8 mm 84922

  Cutting / grinding wheels and discs

  • 36 × cutting discs Ø 24 mm 409

  • 3 × EZ SpeedClic cutting discs for metal (SC456)

  • 10 × abrasive discs Ø 38 mm 411

  • 8 × abrasive discs Ø 38 mm 413

  Sanding / grinding with bands

  • 1 × sanding band mandrel Ø 6.4 mm + band 430

  • 4 × bands Ø 6.4 mm grit 60 431

  • 4 × bands Ø 6.4 mm grit 120 438

  • 1 × sanding band mandrel Ø 13 mm 407

  • 3 × bands Ø 13 mm grit 60 408

  • 4 × bands Ø 13 mm grit 120 432

  Cleaning / polishing

  • 10 × polishing wheels Ø 13 mm 414

  • 5 × polishing wheels Ø 26 mm 429

  • 1 × bristle brush Ø 19 mm 403

  • 1 × polishing compound 421

  Milling, engraving and detailed work

The Dremel 4486 is a keyless self-tightening chuck for rotary tools, designed to allow quick and easy accessory changes without the use of collets or tightening spanners. Thanks to the direct grip (keyless) system, it is particularly useful when bits, grinding wheels, brushes or other accessories with shanks from 0.8 mm to 3.2 mm need to be changed frequently.

Technical data:

• Type: keyless self-tightening chuck

• Model: 4486

• Accessory acceptance range: 0,8 – 3.2 mm (shank)

• Clamping type: keyless (quick grip without collet)

• Material: sturdy steel/metal alloy

• Accessory length: 15.0 mm

• Width: 15.0 mm

• Height: 22.0 mm

• Maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools with standard chuck and 0,8 – 3.2 mm accessories; can also be used with the 225 flexible shaft and the 575 right angle attachment.

Main features:

• Quick clamping of accessories without collets or pliers.

• Accepts bits, grinding wheels, brushes and other accessories with a small shank in a single solution.

• Ideal for work requiring numerous accessory changes.

Technical applications:

• Quick change of drill bits and milling cutters during drilling and milling.

• Fitting of cutting discs, grinding wheels and brushes for cutting, sanding or cleaning operations.

• Use with light accessories where fast changing without tools is required.

The Dremel 654 is a high-speed steel (HSS) straight router bit for rotary tools, designed for routing, grooving and straight cuts in materials such as wood, plastic and other soft or composite materials. The flat tip and cutting geometry make it possible to produce grooves, mortises, slots and linear cavities with control and precision, and it can be used with dedicated routing accessories such as guides or router tables.

Technical data:

• Accessory type: straight bit / router bit for linear routing

• Model: Art. 654

• Shank diameter: 3.2 mm

• Working diameter: 6.4 mm

• Overall accessory length: 36 mm

• Working length: ~2 mm

• Material: high-speed steel (HSS)

• Main use: straight routing and grooving in soft materials such as wood and plastics

• Recommended maximum operating speed: up to 35,000 rpm

• Compatibility: rotary tools with a 3.2 mm accessory chuck (Dremel and equivalents)

Technical applications:

• Straight grooves and mortises in wood and composite panels

• Internal cutting and finishing of recessed areas

• Preparation of recesses for light inlay work

The Dremel 482 is a clamping collet for Dremel rotary tools, designed to hold securely bits and accessories with a thin 1.6 mm (≈ 1/16") shank. This type of collet ensures a secure grip of the accessory in the chuck, improving precision and stability during drilling, milling, engraving or other detail operations. It is part of the range of interchangeable collets used to adapt the tool to different accessory diameters.

Technical data:

• Type: clamping collet for rotary tools

• Model: Item 482

• Supported shank diameter: 1.6 mm (≈ 1/16″) (for accessories with a thin shank)

• Material: hard-wearing metal for a secure grip

• Compatibility: Dremel rotary tools with standard chuck (including use with flexible shaft)

• Use: secures the accessory in the chuck for precision work

• Installation: fits into the chuck and is tightened with the multi-tool's clamping nut

Technical applications:

• Holding 1.6 mm bits for drilling, engraving, milling or sanding on materials such as wood, metal or plastic.

• Improves stability and control in detail and precision applications.

The Dremel 26159924JA, also identified as accessory 9924, is a precision carbide engraving bit designed for use with the Dremel 290 engraver and other compatible rotary tools with standard shank bits. It is designed for decorative or technical engraving on a variety of surfaces, maintaining control and detail when producing lines and grooves.

Technical data:

• Type: engraving bit / carbide engraving bit

• Model: 9924 – 26159924JA

• Bit material: carbide (tungsten)

• Tool compatibility: Dremel 290 engraver and other rotary tools that accept engraving accessories

• Bit diameter: approx. 3 mm

• Overall length: approx. 22 mm

• Use: engraving of fine lines and grooves on various materials such as metal, glass, wood, plastic, ceramic and leather

• Quantity per pack: 3 engraving bits (code 9924 / 26159924JA)

Technical applications:

• Making decorative or functional engravings on hard or soft surfaces

• Creating precise grooves, outlines and details on mixed materials

The Dremel 439 is a replacement abrasive cylinder for rotary tools, used in combination with the mandrel and abrasive band to sand, shape and finish various types of surface. The medium grit makes it suitable for material removal and shaping on wood, metal, fibreglass, rubber and other similar materials.

Technical data:

• Type: abrasive cylinder for sanding/shaping

• Model: Item 439

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary tools)

• Abrasive grit: approx. 60 (medium)

• Material: abrasive on rotating cylinder

• Shape: abrasive cylinder

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding and material removal on wood, plywood and fibreglass

• Removal of rust or light oxidation from metal surfaces

• Shaping of profiles and surfaces on materials such as rubber and plastic

• Surface preparation before finishing or painting