Active filters

SPROCKET 3/8" DUPLEX

€3.60
Only 2 left!
Availability: 2 In stock

SIT double pinion for roller chain, 3/8 inch pitch (9.525 mm), ISO series 06B-2 to DIN 8187 and ISO/R 606. Number of teeth selectable among the variants. Item No. ITP38D00.

SPROCKET 3/8" SIMPLEX

€1.90
Last one left!
Availability: 1 In stock

SIT single pinion with a single row of teeth for roller chain, 3/8 inch pitch (9.525 mm), standard DIN 8187 - ISO/R 606, series 06B-1. Sizes selectable among the variants. Item No. ITP38S00.

SPROCKET 3/8" TRIPLEX

€6.30
Only 2 left!
Availability: 2 In stock

For roller chain with a 3/8 inch pitch (9.525 mm): SIT triple pinion of the ISO series 06B-3, DIN 8187 and ISO/R 606, with the number of teeth to be chosen among the variants. Item No. ITP38T00.

SPROCKET 5/8" DUPLEX

€7.10
AVAILABLE
Availability: 5 In stock

SIT double pinion with two rows of teeth for roller chain, 5/8 inch pitch (15.875 mm), standard DIN 8187 - ISO/R 606, series 10B-2. Sizes selectable among the variants. Item No. ITP58D00.

SPROCKET 5/8" SIMPLEX

€27.40
Last one left!
Availability: 1 In stock

SIT single pinion for roller chain, 5/8 inch pitch (15.875 mm), ISO series 10B-1 to DIN 8187 and ISO/R 606. Number of teeth selectable among the variants. Item No. ITP58S00.

SPROCKET 5/8" TRIPLEX

€12.00
AVAILABLE
Availability: 3 In stock

SIT triple pinion with three rows of teeth for roller chain, 5/8 inch pitch (15.875 mm), standard DIN 8187 - ISO/R 606, series 10B-3. Sizes selectable among the variants. Item No. ITP58T00.

STEEL ROD END, FEMALE-MALE

€5.00
AVAILABLE
Availability: 20 In stock

Steel rod end joint with a female thread on one side and a male thread on the other, for articulated connections. Five threads selectable among the variants; reference JLCS10.

STM RI28P GEARBOX, INPUT SHAFT 9

€71.10
Only 2 left!
Availability: 2 In stock

STM RI 28 worm gearbox, item no. 2010311211: Ø 9 mm input shaft, Ø 14 mm hollow output, die-cast aluminium casing and ZI toothing. Ratio 1:40 in this variant.

STM RI50 GEARBOX F3 BORE 24

€140.00
COMING SOON
Availability: Out of stock

STM RI 50 worm gearbox with F3 flange, item no. 2181015361: Ø 14 mm input shaft, Ø 24 mm hollow output, die-cast aluminium casing. Ratios selectable among the variants.

STM U 110 GEARBOX FOR MOTOR, BORE 42

€567.30
COMING SOON
Availability: Out of stock

STM U 110, item no. 2180238951: worm gearbox with cubic casing and 42 mm hollow output, can be matched with IEC, Brushless and NEMA motors. Ratios selectable among the variants.

STM U 40 GEARBOX FOR MOTOR, BORE 18

€100.70
Only 2 left!
Availability: 2 In stock

STM U 40 square worm gearbox for motor, 18 mm output bore, item no. 2180231511. Cubic body with universal mounting; reduction ratio selectable among the variants.

STM U 50 GEARBOX FOR MOTOR, BORE 25

€113.80
Last one left!
Availability: 1 In stock

STM U 50, item no. 2180231681: worm gearbox with cubic casing and 25 mm hollow output, can be matched with IEC, Brushless and NEMA motors. Ratios selectable among the variants.

STM U 63 GEARBOX FOR MOTOR, BORE 25

€204.30
Only 2 left!
Availability: 2 In stock

STM U 63 square worm gearbox for motor, 25 mm output bore, item no. 2180210421. Cubic body with universal mounting; reduction ratio selectable among the variants.

STM U 75 GEARBOX FOR MOTOR, BORE 28

€254.90
AVAILABLE
Availability: 3 In stock

STM U 75 square worm gearbox for motor, 28 mm output bore, item no. 2180234791. Cubic body with universal mounting; reduction ratio selectable among the variants.

STM U 90 GEARBOX FOR MOTOR, BORE 35

€388.90
Last one left!
Availability: 1 In stock

STM U 90, item no. 2180238531: worm gearbox with cubic casing and 35 mm hollow output, can be matched with IEC, Brushless and NEMA motors. Ratios selectable among the variants.

STM VMF1 VARIATOR SIZE 63, SPEED 190-1000

€269.70
Only 2 left!
Availability: 2 In stock

STM VMF1 mechanical variator size 63, item no. 2200020027: continuous adjustment of the output speed with an operating handwheel. Speed range and torque to be confirmed.

STM VMF1 VARIATOR SIZE 71, SPEED 190-1000

€246.20
COMING SOON
Availability: Out of stock

STM VMF1 size 71, item no. 2200020037: oil-bath mechanical speed variator, adjusted with a handwheel even while the machine is running. Speed data to be confirmed.

STM VMF1 VARIATOR SIZE 80, SPEED 190-1000

€366.00
COMING SOON
Availability: Out of stock

STM VMF1 mechanical variator size 80, item no. 2200000047: continuous adjustment of the output speed with an operating handwheel. Speed range and torque to be confirmed.

STM VMF1 VARIATOR SIZE 90, SPEED 190-1000

€399.70
COMING SOON
Availability: Out of stock

STM VMF1 size 90, item no. 22000020057: oil-bath mechanical speed variator, adjusted with a handwheel even while the machine is running. Speed data to be confirmed.

TAPER BUSH FOR PULLEY 1008

€3.20
Only 2 left!
Availability: 2 In stock

SER-SIT taper bush size 1008: length 22.3 mm, outside diameter 35 mm, 2 screws of 1/4 inch. For mounting pulleys on a shaft with a finished bore, with a simple hex key; bore selectable among the variants.

TAPER BUSH FOR PULLEY 1108

€4.90
Only 2 left!
Availability: 2 In stock

SER-SIT 1108 taper bush with ready-made finished bore: no workshop machining and no play between shaft and pulley. Length 22.3 mm, outside diameter 38 mm, bore among the variants.

TAPER BUSH FOR PULLEY 1210

€5.00
AVAILABLE
Availability: 3 In stock

Size 1210 taper bush from the SER-SIT system: it is inserted into the pulley and tightened on the shaft with 2 screws. Length 25.4 mm, outside diameter 47 mm, bore among the variants.

TAPER BUSH FOR PULLEY 1610

€5.70
AVAILABLE
Availability: 4 In stock

SER-SIT taper bush size 1610: it locks shaft and pulley together by tightening the screws on the taper. Length 25.4 mm, outside diameter 57 mm, finished bore to be chosen among the variants.

TAPER BUSH FOR PULLEY 2012

€7.90
AVAILABLE
Availability: 3 In stock

SER-SIT taper bush size 2012: length 31.8 mm, outside diameter 70 mm, 2 screws of 7/16 inch. For mounting pulleys on a shaft with a finished bore, with a simple hex key; bore selectable among the variants.

TAPER BUSH FOR PULLEY 2517

€12.80
Only 2 left!
Availability: 2 In stock

SER-SIT 2517 taper bush with ready-made finished bore: no workshop machining and no play between shaft and pulley. Length 44.5 mm, outside diameter 85 mm, bore among the variants.

TAPER BUSH FOR PULLEY 3020

€21.60
AVAILABLE
Availability: 4 In stock

Size 3020 taper bush from the SER-SIT system: it is inserted into the pulley and tightened on the shaft with 2 screws. Length 50.8 mm, outside diameter 108 mm, bore among the variants.

TAPER BUSH FOR PULLEY 3535

€52.10
Last one left!
Availability: 1 In stock

SER-SIT taper bush size 3535: it locks shaft and pulley together by tightening the screws on the taper. Length 88.9 mm, outside diameter 127 mm, finished bore to be chosen among the variants.

TAPER BUSH FOR PULLEY 7060

€58.00
Last one left!
Availability: 1 In stock

Pulley bush size 7060, sold separately: it is used to fix the pulley on a shaft with a finished bore, without turning the hub. Variant in the catalogue: 7060-65.

TAPER BUSH FOR PULLEY 9560

€66.70
Only 2 left!
Availability: 2 In stock

Pulley bush size 9560, sold separately: it is used to fix the pulley on a shaft with a finished bore, without turning the hub. Variant in the catalogue: 9560-75.

TAPERED ROLLER BEARINGS 302XX

€10.60
COMING SOON
Availability: Out of stock

FAG 302XX series (Item No. 30224-XL): tapered roller bearings for radial loads and axial loads in one direction, to be mounted in mirrored pairs, from the Schaeffler group. Sizes selectable among the variants.

Filter By

Availability

Availability

Price

Price

  • €0.00 - €1,231.00

Brand

Brand