Tools

The Dremel 432 is a set of abrasive bands (abrasive cylinders) for rotary tools, designed for sanding, shaping and surface cleaning on different materials. The 120 grit aluminium oxide coating offers a good balance between material removal and finish, making these bands ideal for surface preparation and finishing.

Technical data:

• Type: abrasive bands/cylinders for abrasion and sanding

• Model: 432

• Working diameter: approx. 13 mm (½″)

• Abrasive grit: 120 (medium/fine)

• Shank diameter: 3.2 mm (standard for rotary tools)

• Maximum operating speed: up to ~35 000 rpm

• Quantity: normally sold in packs of several pieces (e.g. 6 bands)

• Compatibility: Dremel-type rotary tools with 3.2 mm mandrel

Technical applications:

• Sanding and shaping of wood surfaces and plywood

• Rust removal and cleaning of metal surfaces

• Shaping and finishing of rubber, fibreglass and plastic

• Surface preparation before painting or other finishing

The Dremel 438 is an abrasive cylinder for rotary tools designed for sanding, shaping and finishing surfaces and profiles on various materials. Thanks to its compact shape and suitable abrasive grit, it is effective on wood, metal, plastic and other materials, making this accessory versatile for detail work and surface preparation.

Technical data:

• Type: abrasive cylinder for sanding and shaping

• Model: Item 438

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (standard for rotary multi-tools)

• Abrasive material: aluminium oxide (medium grit)

• Shape: cylindrical with extended abrasive surface

• Accessory length: approx. 50 mm

• Recommended maximum operating speed: up to approx. 30 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding of surfaces and edges on wood and panels

• Shaping of irregular profiles and curved surfaces

• Removal of rust or light oxidation on metal

• Preparation of plastic or composite surfaces before finishing

The Dremel 439 is a replacement abrasive cylinder for rotary tools, used in combination with the mandrel and abrasive band to sand, shape and finish various types of surface. The medium grit makes it suitable for material removal and shaping on wood, metal, fibreglass, rubber and other similar materials.

Technical data:

• Type: abrasive cylinder for sanding/shaping

• Model: Item 439

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary tools)

• Abrasive grit: approx. 60 (medium)

• Material: abrasive on rotating cylinder

• Shape: abrasive cylinder

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding and material removal on wood, plywood and fibreglass

• Removal of rust or light oxidation from metal surfaces

• Shaping of profiles and surfaces on materials such as rubber and plastic

• Surface preparation before finishing or painting

The Dremel 482 is a clamping collet for Dremel rotary tools, designed to hold securely bits and accessories with a thin 1.6 mm (≈ 1/16") shank. This type of collet ensures a secure grip of the accessory in the chuck, improving precision and stability during drilling, milling, engraving or other detail operations. It is part of the range of interchangeable collets used to adapt the tool to different accessory diameters.

Technical data:

• Type: clamping collet for rotary tools

• Model: Item 482

• Supported shank diameter: 1.6 mm (≈ 1/16″) (for accessories with a thin shank)

• Material: hard-wearing metal for a secure grip

• Compatibility: Dremel rotary tools with standard chuck (including use with flexible shaft)

• Use: secures the accessory in the chuck for precision work

• Installation: fits into the chuck and is tightened with the multi-tool's clamping nut

Technical applications:

• Holding 1.6 mm bits for drilling, engraving, milling or sanding on materials such as wood, metal or plastic.

• Improves stability and control in detail and precision applications.

The Dremel 536 is a circular carbon steel brush designed for rotary tools, ideal for cleaning, rust removal, rough polishing and preparation of metal surfaces before finishing. The steel bristles give a more aggressive abrasive action than brass or nylon brushes, making the accessory suitable for ferrous metals and steels.

Technical data:

• Type: circular steel brush for cleaning and deburring

• Model: 536

• Working diameter: approx. 9.5 mm

• Shank diameter: 3.2 mm

• Bristle material: carbon steel

• Shape: circular “brush-type” brush

• Accessory length: approx. 45 mm

• Maximum operating speed: up to 15 000 – 20 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Technical applications:

• Removal of rust, oxidation and flaking paint from metal surfaces

• Cleaning and preparation of ferrous metals before welding or coating

• Deburring of welded joints and sharp edges

• Rough polishing of metal before finer finishing

The Dremel 537 accessory is a brass brush for rotary tools designed for cleaning and surface finishing of relatively soft and delicate metals, ideal for removing oxidation and residues and for creating a satin or matt finish without scratching the surface. The brass bristles are non‑sparking and softer than steel, reducing the risk of damaging sensitive materials.

Technical data:

• Type: brass brush for cleaning/polishing

• Model: 537

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Bristle material: brass (wire brass)

• Shape: rotary brush

• Accessory length: approx. 48 mm

• Maximum operating speed: 15 000 rpm

• Compatibility: rotary tools with 3.2 mm shank (Dremel and compatible)

Technical applications:

• Cleaning of soft metal surfaces such as gold, bronze, copper and brass without generating sparks

• Surface finishing to achieve a satin or matt effect

• Removal of oxidation and residues from joints or hard-to-reach points

• Surface preparation before further machining or fine polishing

The Dremel 615 is a high-speed steel (HSS) router bit designed for compatible rotary tools, intended for rounding edges and chamfering corners on wood or similar materials. This accessory is ideal for decorative work, profile finishing and detail cuts on wood and soft materials.

Technical data:

• Type: router bit / bit for rounding corners on wood and soft materials

• Model: Item 615

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm

• Total accessory length: approx. 37 mm

• Material: high-speed steel (HSS)

• Recommended maximum operating speed: up to 35 000 rpm

• Guide pin: present, for stability and cutting precision

• Tool compatibility: Dremel rotary multi-tools with a 3.2 mm chuck or router attachment (e.g. 231 or 335)

Technical applications:

• Rounding and chamfering of edges and corners on wood

• Decorative cuts and finishing on panels and edges

• Detail work on soft materials such as wood, plywood, laminates, plastic and perspex

The Dremel 640 is a high-speed steel (HSS) router bit of 6.4 mm designed for rotary tools, ideal for V-grooves, decorative engraving and carving, especially in light or soft materials such as wood, plywood, laminates and plastic. It is also particularly suitable for decoration and finishing details and can be used with dedicated router/plunge accessories to optimise the depth of cut.

Technical data:

• Type: router bit for V-grooves in wood and soft materials

• Model: Art. 640

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (compatible with standard chucks)

• Accessory length: approx. 37 mm

• Effective working length: approx. 2.0 mm

• Material: high-speed steel (HSS)

• Recommended operating speed: up to 35 000 rpm

• Compatibility: rotary multi-tools with 3.2 mm chuck, including use with the Dremel router/plunge attachment for greater depth control.

Technical applications:

• Cutting V-grooves in wood and similar materials

• Engraving shapes, lettering or decorative profiles

• Inlay work and finishing on panels and composite surfaces

The Dremel 652 is a high-speed steel (HSS) straight cutter for rotary tools, ideal for making milling cuts, straight grooves, cut-outs and mortises in soft materials such as wood and plastic. It can be used with the dedicated Dremel routing attachments for greater precision and control in use.

Technical data:

• Type: straight cutter for milling, cut-outs and mortises

• Model: 652

• Material: high-speed steel (HSS)

• Shank diameter: 3.2 mm

• Working diameter: 4.8 mm

• Accessory length: approx. 36.0 mm

• Effective working length: approx. 1.4 mm

• Shape: straight cutting edges

• Maximum recommended operating speed: up to ~35 000 rpm

• Compatibility: rotary tools with 3.2 mm accessory chuck and with a routing attachment (e.g. ****)

Technical applications:

• Linear milling and engraving in softwood and hardwood

• Making grooves and mortises for joints

• Precision work on plastic, Plexiglas and similar materials

The Dremel 654 is a high-speed steel (HSS) straight router bit for rotary tools, designed for routing, grooving and straight cuts in materials such as wood, plastic and other soft or composite materials. The flat tip and cutting geometry make it possible to produce grooves, mortises, slots and linear cavities with control and precision, and it can be used with dedicated routing accessories such as guides or router tables.

Technical data:

• Accessory type: straight bit / router bit for linear routing

• Model: Art. 654

• Shank diameter: 3.2 mm

• Working diameter: 6.4 mm

• Overall accessory length: 36 mm

• Working length: ~2 mm

• Material: high-speed steel (HSS)

• Main use: straight routing and grooving in soft materials such as wood and plastics

• Recommended maximum operating speed: up to 35,000 rpm

• Compatibility: rotary tools with a 3.2 mm accessory chuck (Dremel and equivalents)

Technical applications:

• Straight grooves and mortises in wood and composite panels

• Internal cutting and finishing of recessed areas

• Preparation of recesses for light inlay work

The Dremel 7105 is a spherical diamond bit for rotary tools, designed for engraving, sculpting, shaping and material removal on hard or abrasive surfaces. This accessory has a coating of diamond particles that increase its resistance and effectiveness on materials that are difficult to work.

Technical data:

• Type: diamond bit for engraving / carving on hard materials

• Model: 7105

• Shank diameter: 3.2 mm

• Working diameter: 4.4 mm

• Accessory length: approx. 46 mm

• Material: steel with diamond coating for greater hardness and durability

• Shape: spherical bit / diamond disc

• Recommended operating speed: up to approx. 25 000–35 000 rpm (do not exceed the maximum values indicated)

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck; does not require an additional chuck

Technical applications:

• Fine engraving and carving on glass, ceramic, porcelain, semi-precious stones

• Shaping and material removal on hardened and hard metals

• Detailed work on wood and other materials that are difficult to work with standard tools

The Dremel 9903 is a tungsten carbide engraving/carving cutter designed for rotary tools with a 3.2 mm shank, used to shape, smooth and remove material from hard surfaces with precision. This accessory is suitable for a wide range of applications on tough materials, delivering high performance even in demanding working conditions.

Technical data:

• Type: tungsten carbide engraving/carving cutter

• Model: 9903

• Shank diameter: 3.2 mm / 1/8″

• Working diameter: 3.2 mm

• Accessory length: approx. 39 mm

• Material: tungsten carbide (highly wear-resistant)

• Shape: rounded/cylindrical tip, ideal for engraving and material removal

• Maximum recommended speed: up to 30 000 rpm

• Compatibility: suitable for rotary tools with a chuck compatible with 3.2 mm accessories

Technical applications:
Engraving, shaping, material removal and detailing work on hard materials such as hardened steel, stainless steel, cast iron, ceramic, glass, plastic and hardwood.

Single tungsten carbide cutter with a ball tip for rotary tools, designed for engraving, shaping and material removal on hard surfaces.
The spherical tip geometry allows concave channels, curves and rounded details to be produced with control and precision on a wide range of materials, including metal and difficult-to-machine materials.

Technical data:

• Type: tungsten carbide cutter for engraving/shaping

• Model: Art. 9905

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Accessory length: 38.0 mm (approx.)

• Material: tungsten carbide (C‑2)

• Tip shape: spherical (ball tip)

• Maximum recommended operating speed: up to 30 000 rpm

Technical applications:
Engraving, shaping of concave profiles, material removal and fine detailing on hardened steel, stainless steel, cast iron, ceramic, non-ferrous metals, hardwood or plastic.

The Dremel 9910 is a tungsten carbide engraving/carving cutter suitable for rotary tools fitted with a chuck for 3.2 mm accessories. Designed for aggressive machining and particularly hard materials, it allows you to shape, smooth or remove material on complex surfaces with high precision.

Technical data:

• Type: engraving / carving cutter

• Material: tungsten carbide (highly wear-resistant)

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Accessory length: approx. 39 mm

• Shape: conical tip for precision engraving and shaping

• Maximum recommended operating speed (indicative): up to 30 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a fitting for 3.2 mm accessories

Technical applications:
Engraving, carving, shaping and material removal on hard materials such as hardened metals, stainless steel, cast iron, ceramic, glass, hard plastic and wood. Also suitable for detail and finishing work on complex surfaces.

Set of 5 thin cutting discs for rotary tools with EZ SpeedClic fitting, designed for precise cuts in metal and metallic materials such as steel, aluminium and copper. The discs are reinforced and very thin to make cutting easier and reduce effort during the operation.

Technical data:

• Type: thin cutting discs EZ SpeedClic

• Model: SC409

• Quantity: 5 discs

• Working diameter: 38.0 mm

• Shank diameter: 3.2 mm

• Max working depth: 14.0 mm

• Disc thickness: 0.75 mm (extra thin)

• Mounting system: EZ SpeedClic – quick tool-free change

• Maximum recommended speed: up to 35,000 rpm

• Material: fibreglass-reinforced abrasive (for long-lasting cuts)

• Use: cutting and parting of sheet metal and thin metal workpieces

Set of 6 EZ SpeedClic abrasive discs designed for sanding and shaping operations on surfaces and edges, with the EZ SpeedClic mounting system, which allows quick, tool-free replacement of accessories. The discs are suitable for relatively soft and medium-hard materials and are used with a compatible SpeedClic mandrel/mount.

Technical data:

• Type: EZ SpeedClic abrasive discs for sanding and shaping

• Model: SC411

• Working diameter: 30 mm

• Fitting diameter (shank): 3.2 mm

• Grit: 60 (medium abrasive)

• Quantity: 6 discs

• Mounting system: EZ SpeedClic – quick tool-free change

• Tool compatibility: compatible with Dremel SpeedClic chuck (e.g. SC402)

• Applications: sanding of flat surfaces and edges, material removal on wood, plastic, soft metals and other comparable materials

The Dremel TR 562 is a cutting accessory specific to Dremel TRIO tools, designed to make cuts in ceramic wall tiles, plasterboard and cement boards with precision and control. It is suitable only for use with the Dremel TRIO system and is not compatible with standard rotary multi-tools.

Technical data:

• Type: cutting bit for wall tiles/panels

• Model: TR 562

• Fitting: 4.8 mm shank (compatible with Dremel TRIO system)

• Working diameter: 3.2 mm

• Accessory length: approx. 52 mm (overall size)

Applications: cutting of ceramic wall tiles, plasterboard and cement boards; suitable for shaping and fitting around sockets, profiles or pipework during installations and renovations.

The TR 615 cutter is an accessory for Dremel TRIO tools designed specifically for rounding and shaping corners and edges on soft materials such as wood, plastic, rubber and Plexiglas. The tool produces rounded profiles and softer finishes on surfaces of small craft projects and detail work.

Technical data:

• Type: edge-rounding cutter

• Model: TR 615

• Working diameter: 9.5 mm

• Shank diameter: 4.8 mm

• Recommended materials: hardwood, softwood, rubber, plastic, Plexiglas, carbon

• Compatibility: dedicated accessory for Dremel TRIO (not suitable for traditional multi-tools without a TRIO adapter)

• Shape: rounded profile for chamfering and finishing corners

The Dremel 225 flexible shaft is a precision accessory for Dremel rotary tools, designed to allow detailed and finishing work in hard-to-reach places. It connects easily to the body of the multi-tool via the Quick Connect system, turning the tool into a fine-control instrument with a “pen”-style grip.

Technical data:

• Type: flexible shaft for rotary tools

• Model: 225 / 225‑02 (versions with ergonomic grip and Quick Connect collar)

• Total length: approx. 1070 mm (flexible cable)

• Bending radius: approx. 127 mm (optimal flexibility in tight spots)

• Quick Connect fast coupling for quick connection to the Dremel multi-tool

• Soft grip for better control and precision comfort

• Compatible with Dremel rotary tools fitted with Quick Connect (200, 3000, 4000, 8200, 8220 series, etc.)

• Accepts accessories with shank up to 1/8 in (≈ 3.2 mm)

Applications: engraving, polishing, grinding, sanding and detail work in tight spaces and on complex surfaces.

The Dremel 26159929JA, also identified as accessory 9929, is a diamond engraving bit designed to work with the Dremel 290 engraver and compatible rotary tools. Thanks to its diamond-coated head, it offers longer life and wear resistance compared with standard bits, allowing harder materials such as glass and stainless steel to be engraved with precision and control.

Technical data:

• Type: diamond engraving bit

• Model: 9929 / 26159929JA

• Bit material: diamond / diamond coating

• Bit diameter: ~3 mm

• Overall length: ~20 mm

• Tool compatibility: Dremel 290‑1 / 290‑3 Hobby engraver and multi-tools with a chuck suitable for engraving

• Quantity per pack: 1 diamond bit

Technical use:

• Engraving of glass, ceramic, marble, stainless steel and hard materials

• Creating thin lines, grooves and precise details on difficult surfaces

• Suitable for craft projects, model making and precision work

The Dremel Art. 636 is a drill bit set specifically for wood, designed for precision drilling in wood and similar materials with compatible rotary tools. Each bit features a centring point for a precise, straight start to the hole and a titanium coating for longer life and consistent performance.

Technical data:

• Type: wood drill bit set for rotary tools

• Model: 636

• Number of bits included: 4 pieces

• Working diameters: 3 mm, 4 mm, 5 mm, 6 mm

• Shank diameter: 3.2 mm (1/8″)

• Coating: titanium for long service life

• Centring point: yes, for accurate holes and a straight entry

• Recommended use: drilling in softwood, hardwood, laminate, plywood, chipboard and fibreboard

• Maximum recommended operating speed: up to 35 000 rpm

• Typical applications: precision drilling in wood, making holes from Ø 3 mm to Ø 6 mm, preparing joints, screw pilot holes and craft details

The Dremel Driver is a cordless driver designed for precision screwdriving, ideal for light assembly and small fastening jobs. A compact, lightweight tool with an ergonomic grip and a quick bit change system.

Technical data:

• Battery voltage: 7.2 V Li‑Ion

• Battery capacity: 1.0 Ah

• Charging time: approx. 5 h

• Variable speed: 0 – 300 rpm

• Weight: approx. 0.43 kg

• Tool length: 12.6 cm

• Battery technology: Lithium‑Ion

• Chuck/bit holder: magnetic bit holder, compatible with 1/4″ hex bits

• Supplied with: driver, battery charger, 8 hex bits, detachable bit holder

The Dremel 454 is an aluminium oxide abrasive grinding wheel designed for use with Dremel-type rotary multi-tools, specifically for sharpening the teeth of saw chains, guides and metal profiles. Thanks to its compact diameter and sturdy construction, it allows you to restore the angle and sharpness of the chain teeth with control and precision.

Technical data:

• Type: abrasive grinding wheel for sharpening saw chains

• Model: 454

• Working diameter: approx. 4.8 mm

• Shank diameter: 3.2 mm (standard multi-tool)

• Abrasive material: aluminium oxide

• Shape: cylindrical / for contact with the chain profile

• Accessory length: approx. 50 mm

• Maximum operating speed: up to 30 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Technical applications:

• Sharpening of chainsaw chain teeth to restore sharpness and cutting performance.

• Use with sharpening guides or spacers to maintain consistent angles between the teeth.

• Preparing the chain for cleaner and safer cuts.

The Dremel 4485 is a collet kit with collet nut for Dremel series rotary tools, designed to hold a wide range of bits and accessories firmly with different shank diameters. The set lets you adapt the tool to the correct accessory size, ensuring a stable grip and reducing vibration or slipping during use. This accessory is a simple and versatile solution for anyone who frequently uses bits of different diameters on rotary multi-tools.

Technical data:

• Type: collet set with collet nut for rotary multi-tool

• Model: 4485

• Contents:

  • 1 × collet nut

  • 4 × collets of diameters: 0.8 mm, 1.6 mm, 2.4 mm, 3.2 mm

• Supported accessory diameter range: 0.8 mm – 3.2 mm

• Tool compatibility: Dremel rotary multi-tools (cordless and corded) with a chuck for traditional collets

• Recommended maximum speed: up to 35 000 rpm

• Material: sturdy metal for a stable grip and long operating life

• Installation: screws onto the front thread of the tool, and the collets are fitted to clamp the accessories

Technical applications:

• Precise clamping of bits, cutters, grinding wheels, brushes or other accessories in the supported diameters.

• Improves the stability and control of the accessory when working on wood, metal, plastic and other materials.

• Ideal for anyone who uses several tool diameters with the same rotary tool.

The Dremel 2615MS53JA is a set of serrated blades for cutting metal for use with the Dremel Moto‑Saw (MS20) jigsaw. The blades are specifically designed for cutting light sheet metal and soft metal, ensuring precision and control on both curved and straight profiles.

Technical data:

• Type: blades for Moto‑Saw jigsaw

• Model: 2615MS53JA

• Application: cutting soft metal/light sheet metal

• Total blade length: 100 mm

• Cutting depth: 3 mm

• Number of teeth: 10 teeth per centimetre

• Blade thickness: approx. 0.2 mm

• Compatibility: Dremel Moto‑Saw (MS20‑1/5) and other Moto‑Saw jigsaws that accept MS53 blades

Package contents:

• 5 × MS53 serrated metal-cutting blades (5 pieces)

Technical applications:

• Cutting sheet metal and soft metal sheets

• Making curved and straight cuts in thin metallic materials

• Suitable for metals such as aluminium, copper, brass and similar

The Dremel 569 is a tungsten carbide removal bit designed for Dremel-type rotary tools, specifically for removing mortar or grout from the joints between tiles during renovation or maintenance work. It is intended for spot use or small repairs in combination with the dedicated grout removal attachment (model 568) to keep the bit centred and ensure controlled feed of the tool.

Technical data:

• Type: tungsten carbide grout / mortar removal bit

• Model: 569

• Working diameter: ~1.6 mm (≈ 1⁄16″)

• Shank diameter: 3.2 mm (≈ 1⁄8″), compatible with Dremel rotary tools

• Accessory length: approx. 58 mm

• Material: tungsten carbide

• Recommended operating speed: 15 000 – 20 000 rpm (use with guide and slow feed)

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm shank; can be used with the grout removal attachment 568 to remove grout between tiles

Technical applications:

• Controlled removal of mortar or grout from the joints between tiles before regrouting or resealing

• Preparing tile joints for maintenance or replacement

• Use with a guide/fixing to keep the bit aligned between the tiles

The Dremel 570 is a tungsten carbide removal bit designed for Dremel-type rotary tools, specifically for removing mortar or cement in the joints between tiles during renovation or maintenance work. It is used with the Dremel 568 accessory (grout removal attachment) to keep the bit centred between the joints and ensure controlled feed.

Technical data:

• Type: tungsten carbide grout / mortar removal bit

• Model: Item 570

• Working diameter: 3.2 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 58 mm

• Useful working length: approx. 10 mm

• Material: tungsten carbide

• Recommended maximum speed: up to 20,000 rpm (typical use 15–20 000 rpm)

• Compatibility: used with Dremel rotary tools and with the grout removal attachment (mod. 568) for removing mortar between tiles

Technical applications:

• Controlled removal of mortar or cement in the joints between tiles before replacing or repairing broken tiles.

• Preparing joints for regrouting or resealing.

The Dremel 650 is a high-speed steel (HSS) straight cutter designed for rotary tools, intended for milling, straight grooves and linear engraving in soft materials such as wood and plastics. It is ideal for detail work, inlays, profiles and mortises in thin surfaces.

Technical data:

• Type: straight cutter / bit for milling and linear engraving in soft materials

• Model: Art. 650

• Material: high-speed steel (HSS)

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Effective working length: approx. 1 mm

• Total length: approx. 36 mm

• Shape: straight cut with flat profile

• Maximum recommended operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm accessory chuck

Technical applications:

• Linear milling and cutting of straight grooves in wood, plywood and laminates

• Inlays and profiles on soft material surfaces

• Engraving channels and mortises for light joints

The Dremel Engraver model 290JM/Engraver is a corded power tool specifically designed for precision engraving on a wide range of materials, including metal, glass, wood, plastic and ceramic. The variable engraving depth adjustment and ergonomic grip provide control and comfort even during prolonged use.

Technical data:

• Rated power: 35 W

• Operating voltage: 230 V

• Weight: 0.31 kg

• Tool length: approx. 17 cm

• Strokes per minute: approx. 6 000 spm

• Grip: soft for comfort and control

• Engraving system: reciprocating action with adjustable depth

• Engraving tip: interchangeable carbide

• Typically supplied with: engraver, replaceable carbide engraving tip, stencils for creative engraving, instruction manual

Applications: engraving on metal, glass, wood, plastic and ceramic surfaces; ideal for detail work, personalisation and decoration.

The Dremel 3000 JS is a high-performance corded power multi-tool with a 130 W motor and variable speed, supplied with 25 genuine accessories and a flexible shaft for precision work in hard-to-reach places. The tool features a soft grip and a quick accessory change system for greater operating versatility

Technical data:

• Voltage: 230 V

• Motor power: 130 W

• No-load speed: 10.000 – 33,000 rpm

• Speed setting: variable

• Accessory change system: EZ Twist

• Weight: approx. 0.55 kg

• Tool dimensions: approx. 19 cm length × 5 cm width × 4.5 cm depth

• Chuck: compatible with standard Dremel multi-purpose accessories (0,8 – 3.2 mm)

• Supplied with: 25 multi-purpose accessories and flexible shaft for precision and extended control

Typical applications: cutting, engraving, sanding, grinding, polishing, cleaning of surfaces and details on wood, metal, plastic and other materials.

The Dremel Moto‑Saw 70 W is a compact electric fretsaw designed for precision cuts in a variety of materials, including wood, plastic and metal, and can be used both in stationary and hand-held mode. The quick blade change system and variable speed control allow it to be adapted to different cutting requirements.

Technical data:

• Motor power: 70 W

• Operating voltage: 220 – 240 V

• No-load speed: 1 500 – 2 250 1/min

• Cutting depth: 18 mm

• Weight: 1.10 kg

• Tool dimensions (L × D × H): 40 cm × 21 cm × 37 cm

• Quick accessory change system: quick-release change lever

• Sound pressure: 77,3 dB(A)

• Sound power: 88,3 dB(A)

• Vibration (average value): 2.5 m/s²

• Operating modes: stationary (mounted) or hand-held (easy to handle)

• Included as standard: 2 multi-purpose wood cutting blades, 2 precision wood cutting blades, 1 metal cutting blade, parallel guide, carry case and user manual

The Dremel 2615MS51JA is a set of multi-purpose blades for the Dremel Moto‑Saw (MS20) jigsaw, designed for straight and curved cuts in wood and plastic. The blades, with 6 teeth per centimetre, offer a good compromise between feed speed and cutting precision, making them suitable for general cutting of light to medium materials.

Technical data:

• Type: serrated blades for Moto‑Saw jigsaw

• Model: 2615MS51JA

• Compatibility: Dremel Moto‑Saw (MS20‑1/5)

• Quantity per pack: 5 pieces

• Overall blade length: 100 mm

• Cutting depth: 18 mm

• Teeth per centimetre: 6 TPI (≈ 6 teeth/cm)

• Blade width: 4.0 mm

• Blade thickness: 0.4 mm

• Blade depth: 2.5 mm

Technical applications:

• Straight and curved cutting in softwood and hardwood, chipboard, laminates and plywood.

• Cutting and finishing of plastic and similar materials for profiling or joints.

Main details:

• Type: pair of replacement brushes for Dremel rotary tool

• Item code: 0615298790 / UEB0615298790

• Application: replacement motor component for Dremel tools

• Dimensions: approx. 5 × 5.5 mm

• Function: replacement of worn brushes to restore motor performance

The Dremel SC 407 is an EZ SpeedClic sanding set consisting of a mandrel with a quick-change system and two 13 mm sanding bands of different grits, designed for sanding, shaping and material removal on wood, plastic, soft metals and other materials. The EZ SpeedClic™ system allows accessories to be changed without the use of spanners, making use quicker and more intuitive.

Technical data:

• Type: EZ SpeedClic mandrel + sanding bands for sanding

• Model: SC 407

• Shank diameter: 3.2 mm

• Band working diameter: 13.0 mm

• Abrasive material: aluminium oxide

• Grits included: 60 (more aggressive) and 120 (finer)

• Compatibility: rotary tools with 3.2 mm chuck and EZ SpeedClic™ system

• Recommended operating speed: up to 35 000 rpm

• Mounting system: EZ SpeedClic™ — tool-free accessory change

Exact package contents:

• 1 × EZ SpeedClic sanding mandrel

• 1 × 13 mm sanding band, grit 60 (very aggressive)

• 1 × 13 mm sanding band, grit 120 (finer)

Technical applications:

• Sanding and material removal on softwood and hardwood

• Roughing and finishing on plastics and composite materials

• Cleaning and removal of light oxidation from soft metals

• Contouring and surface preparation before finishing

The Dremel SC402 pin mount is an EZ SpeedClic chuck designed for use with Dremel rotary tools and the EZ SpeedClic system, which allows accessories such as cutting discs and abrasive discs to be fitted and changed quickly without the use of spanners. This accessory makes changing elements faster than with a standard chuck and supports the high rotation speeds suited to multi-tools.

Technical data:

• Type: chuck / pin mount EZ SpeedClic

• Model: SC402

• Shank diameter: 3.2 mm

• Accessory length: 38 mm

• Maximum operating speed: 35,000 rpm

• Accessory change system: EZ SpeedClic – quick tool-free change (Pull–Twist–Release)

• Compatibility: Dremel rotary tools with SpeedClic fitting (for mounting specific discs and compatible accessories)

The Dremel Stylo+ is a corded electric multi-tool with a compact, pen-like design, intended for precision applications on a wide range of materials. Ideal for engraving, light sanding, polishing and cleaning, it offers variable speed and quick accessory change to suit different operating needs.

Technical data:

• Rated power: 9 W

• Supply voltage: 100–240 V

• No-load speed: 5 000–22 000 rpm

• Speed setting: variable

• Accessory change system: self-tightening chuck

• Weight: approx. 0.11 kg

• Tool length: approx. 16 cm

• Power cable: 2 m

• Vibration (average value): 2.5 m/s²

• Sound pressure level: approx. 70 dB(A)

• Accessories included: set of 15 accessories for engraving, sanding, polishing and cleaning (depending on version)

Technical applications:

• Engraving and carving on thin materials

• Fine sanding

• Cleaning and polishing of surfaces

• Creative finishing for hobby use

Portable tool powered by liquid butane gas with integrated tank, designed for soldering, brazing, heat shrinking and localised heating applications with a controllable high-performance flame. It reaches high temperatures in a short time and refills quickly for continuous use.

Technical data:

• Power supply: liquid butane gas

• Ignition: piezoelectric (no need for an external lighter)

• Tank capacity: 42 ml / 22 g

• Continuous burn time: approx. 75 minutes

• Flame temperature: up to 1.200 °C in open flame mode

• Hot air temperature: approx. 680 – 1.000 °C

• Soldering tip temperature: approx. 550 °C

• Tool weight: approx. 0.227 kg

• Compact dimensions: approx. 170 mm length × 60 mm width × 110 mm depth

• Typical supplied items (vary depending on the pack): catalyst, soldering tip, flame spreader, deflector, solder with sponge and metal case

The Dremel VersaTip is a multifunction butane gas-powered soldering iron, designed for a variety of cordless heat operations, including soldering, hot cutting, pyrography, brazing and paint stripping. The temperature is adjustable to suit different applications, while the built-in ignition system allows a quick and easy start. The kit includes several interchangeable accessories to cover different modes of use.

Technical data:

• Power supply: liquid butane gas (fuel not included)

• Ignition: built-in piezoelectric

• Maximum temperature: approx. 1.200 °C (open flame)

• Hot air temperature: approx. 680 °C

• Tip temperature: approx. 550 °C

• Tank capacity: ~12 ml of gas (~7 g)

• Operating time: up to ~90 minutes with a full tank (depends on use)

• Tool weight: approx. 0.135 kg

• Dimensions (approx.): 19 cm length × 2.5 cm width × 2.5 cm depth

• Mode of use: cordless for maximum mobility

• Accessories included: several interchangeable tips for soldering, hot cutting, pyrography, flat torch and more depending on the kit selected

Technical applications: light soldering of wires/thin metals, brazing, thermal cutting of thin materials, pyrography on wood/plastic, removal of paints or coatings with heat.

The Dremel 2615MS52JA is a set of 5 fine-tooth serrated blades for the Dremel Moto‑Saw (MS20) jigsaw, designed for detailed and precise cuts in wood and similar materials such as plastic or laminates. The blades have a profile with 7 teeth per centimetre to ensure clean, controlled cuts, even in curves and complex profiles.

Technical data:

• Type: serrated blades for jigsaw

• Model: 2615MS52JA

• Compatibility: Dremel Moto‑Saw (MS20‑1/5)

• Quantity per pack: 5 pieces

• Blade diameter / thickness: 0.2 mm

• Overall length: 100 mm

• Cutting depth: 12 mm

• Number of teeth: 7 teeth/cm (≈ fine grain)

• Material applications: softwood and hardwood, plywood, laminates, plastic and similar soft materials

Technical applications:

• Precise, controlled cutting of wood and boards

• Creating curves, profiles and details in light materials

• Shaping and finishing work on plastic materials