Accessories & Consumables

The Dremel 8153 is a cylindrical aluminium oxide grinding stone designed for rotary tools with a 3.2 mm shank fitting, ideal for grinding, deburring and sharpening on a wide range of metallic materials and alloys. The shape and dimensions of the abrasive body also allow it to work effectively on tapered surfaces and irregular profiles.

Technical data:

• Type: grinding stone for general grinding and deburring on metal and ferrous materials.

• Model: 8153.

• Quantity: 1 piece.

• Abrasive material: aluminium oxide.

• Shape: cylindrical.

• Working diameter: 4.8 mm.

• Shank diameter: 3.2 mm.

• Accessory length: approx. 38 mm.

• Recommended maximum operating speed: up to 25 000 rpm.

• Compatibility: for use with Dremel rotary multi-tools and other compatible tools with a 3.2 mm chuck.

Technical applications:

• Sharpening of blades, drill bits and cutting tools.

• Deburring and smoothing of welded joints and castings.

• Removal of rivets, rust and excess material on metal.

• Preparation of metal surfaces before finishing.

The Dremel 84922JA is a set of silicon carbide abrasive points for rotary tools with a standard 3.2 mm shank. These small conical points are designed for grinding, deburring and engraving on hard or non-ferrous materials where traditional aluminium oxide points are less effective.

Technical data:

• Type: silicon carbide abrasive points for grinding and deburring

• Model: 84922JA

• Pack quantity: set of 3 pieces

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm

• Shape: small cone for access to surfaces and details

• Abrasive material: silicon carbide, more durable than aluminium oxide points

• Accessory length: approx. 40 mm

• Recommended maximum operating speed: up to 25 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a chuck for 3.2 mm accessories

Technical applications:

• Grinding and deburring of hard and brittle materials such as glass, ceramic, porcelain, stone and non-ferrous metals

• Engraving and material removal on uneven surfaces

• Preparation of complex surfaces before finishing

The Dremel 85422 is a silicon carbide abrasive wheel designed for grinding, deburring and sharpening hard or non-ferrous materials. Thanks to its more durable construction compared with aluminium oxide points, it is suitable for working materials such as glass, ceramic, stone and non-ferrous metals with precision and long working life.

Technical data:

• Type: silicon carbide grinding stone for grinding and deburring on hard surfaces

• Model: 85422

• Working diameter: 19.8 mm

• Shank diameter: 3.2 mm

• Total length: approx. 40 mm

• Shape: thin disc for tapered and flat applications

• Material: abrasive silicon carbide, harder than aluminium oxide stones

• Recommended operating speed: up to 35,000 rpm (varies depending on the material)

• Compatibility: Dremel rotary tools and multi-tools compatible with 3.2 mm accessories

Typical applications:

• Grinding and deburring of hard materials such as ceramic, glass and stone

• Removal of excess glaze or paint from ceramic surfaces

• Sharpening and shaping of non-ferrous surfaces

The Dremel Art. 953 is a set of 3 aluminium oxide grinding stones for rotary tools, designed for grinding, deburring and sharpening on metal and ferrous materials. The conical components allow work on conical and curved surfaces and joints, delivering effective finishes and controlled material removal.

Technical data:

• Model: 953

• Quantity: 3 grinding stones per pack

• Abrasive material: aluminium oxide

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 40 mm

• Shape: conical / versatile for curved surfaces

• Applications: smoothing, deburring and sharpening on metal, castings, welded joints, rivets and rust removal

• Maximum operating speed: up to 25,000 rpm

• Compatibility: rotary tools that accept accessories with a 3.2 mm shank

Typical use:

• Removal of burrs from cuts in metal

• Smoothing of welded joints and castings

• Sharpening of tools and metal edges

• Removal of rivets and rust on ferrous surfaces

The Dremel 26159924JA, also identified as accessory 9924, is a precision carbide engraving bit designed for use with the Dremel 290 engraver and other compatible rotary tools with standard shank bits. It is designed for decorative or technical engraving on a variety of surfaces, maintaining control and detail when producing lines and grooves.

Technical data:

• Type: engraving bit / carbide engraving bit

• Model: 9924 – 26159924JA

• Bit material: carbide (tungsten)

• Tool compatibility: Dremel 290 engraver and other rotary tools that accept engraving accessories

• Bit diameter: approx. 3 mm

• Overall length: approx. 22 mm

• Use: engraving of fine lines and grooves on various materials such as metal, glass, wood, plastic, ceramic and leather

• Quantity per pack: 3 engraving bits (code 9924 / 26159924JA)

Technical applications:

• Making decorative or functional engravings on hard or soft surfaces

• Creating precise grooves, outlines and details on mixed materials

Item 105 is a set of 3 engraving cutters, 0.8 mm with a ball head, designed for detail work with high-speed rotary tools. These accessories are ideal for carving, engraving, milling and material removal on a variety of substrates, ensuring precision even on curved surfaces or small details.

Technical data:

• Type: set of engraving cutters / engraving bits

• Model: 105 / 26150105JA

• Working diameter: 0.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Shape: ball

• Material: high-speed steel

• Maximum recommended speed: up to ~35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutters 0.8 mm

Technical applications:

• Engraving and material removal on wood, plastic, laminates and soft metals

• Cutting of grooves, profiles and precision details

• Suitable for detail work, decoration and shaping on flat or curved surfaces

Dremel 108 engraving cutter is an engraving cutter/engraving bit with a cylindrical shape, 0.8 mm, designed for detail work with high-speed rotary tools. This tool allows you to carve, engrave, mill and create grooves with precision on materials such as wood, plastic, leather, rubber and soft metals, and is also suitable for curved or complex surfaces.

Technical data:

• Type: engraving cutter / engraving bit

• Model: 108 / 26150108JA

• Working diameter: 0.8 mm (approx. 1/32 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Material: high-speed steel / hardened steel for general use

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutters 0.8 mm

Technical applications:

• Engraving, shaping and material removal on wood, plastic, laminates, fibreglass and soft metals

• Creation of grooves, profiles, tapered holes and details on flat or curved surfaces

• Ideal for precision work, decoration and artistic carving on soft materials

Dremel Pack of 3 engraving cutters – item 110 is an engraving cutter/cutting engraving bit with a cylindrical head of approx. 1.9 mm, designed for detail work with high-speed rotary tools. It is suitable for shaping, engraving, grooving and material removal on various materials, offering precision even on curved surfaces.

Technical data:

• Type: engraving cutter / engraving bit

• Model: 110 / 26150110JA

• Working diameter: ~1.9 mm (5/64 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~45 mm

• Material: high-speed steel

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Pack quantity:

• 1 engraving cutter

Technical applications:

• Engraving and material removal on wood, plastic, laminates, soft metals and similar materials

• Creation of grooves, profiles, hollowing and precision details

• Can also be used on curved or hard-to-reach surfaces

The item 113 is a cylindrical engraving cutter of 1.6 mm designed for detail work on a wide range of materials. It is specifically made for engraving, shaping and material removal with high-speed rotary tools, offering precision even on curved and complex surfaces.

Technical data:

• Type: engraving / carving cutter

• Model: 113 / 26150113JA

• Working diameter: 1.6 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~45 mm

• Material: high-speed steel

• Recommended maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm chuck

Quantity in pack:

• 1 × engraving cutter 113 (some packs may include several bits depending on variant)

Technical applications:

• Engraving and detail work on wood, plastic, laminates and similar materials

• Shaping, milling of small surfaces and creation of fine grooves

• Also suitable for work on soft metal, leather, rubber and plexiglass

The item 115 is a cylindrical high-speed cutter of approximately 7.8 mm, designed for carving, engraving and removing material on a variety of surfaces. It is designed to achieve precision machining in operations such as shaping, engraving, grooving and tapered drilling with high-speed rotary tools.

Technical data:

• Type: high-speed cylindrical carving/engraving cutter

• Model: 115 / 26150115JA

• Working diameter: approx. 7.9 mm (5/16 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 38 mm

• Material: high-speed steel

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

• Recommended speed: up to approx. 30 000 rpm, varying according to the material being worked (wood, plastic, soft metal)

Quantity in the pack:

• 2 × carving/engraving bits (cylindrical shape) included in the standard 115 pack.

Technical applications:

• Shaping and removal of material on wood, plastic and soft metals

• Engraving, grooving and creation of profiles on flat or curved surfaces

• Creation of tapered holes and precision details in material machining projects

The item 1453 is a complete sharpening kit for saws and chains, designed to keep blades and chains efficient and performing at their best. Ideal for precise and safe cutting, it extends chain life and ensures smooth, controlled cutting operations.

Technical data:

• Type: sharpening kit for saws and chains

• Model: 1453 / 261501453JA

• Compatibility: chainsaw chains of various brands

• Kit contents: round file, sharpening guide, positioning supports

• Material: hardened steel for files, tough plastic for supports

• Recommended use: regular chain maintenance for precise and safe cuts

Quantity in the pack:

• 1 × complete sharpening kit

Technical applications:

• Sharpening and maintenance of chainsaw chains

• Restoring the edge for clean, even cuts

• Preventive maintenance operations to extend chain life

The item 192 is a 4.8 mm high-speed tapered cutter (carving/engraving bit) for rotary tools, designed for shaping, engraving and removing material in precision work on wood, plastic and similar materials. Ideal for creating grooves, profiles, hollows and small tapered holes on flat or curved surfaces.

Technical data:

• Type: high-speed tapered carving/engraving cutter

• Model: 192 / 26150192JA

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 2 × item 192

Technical applications:

• Shaping and engraving of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small tapered holes

• Detail work and decoration on soft materials

The item 193 is a 2.4 mm high-speed ball cutter (carving/engraving bit) for rotary tools, designed for engraving, shaping and removing material in detail work on wood, plastic and similar materials. Ideal for precision operations, creating grooves and profiles, or making hollows and small holes on curved or flat surfaces.

Technical data:

• Type: high-speed ball carving/engraving cutter

• Model: 193 / 26150193JA

• Working diameter: 2.4 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 1 × item 193

Technical applications:

• Engraving, shaping and modelling of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small holes on flat or curved surfaces

• Decoration and detail work on soft materials

The Dremel 196 is a high-speed cylinder cutter (carving/engraving bit) of 6.4 mm for rotary tools, designed for carving, shaping, grooving and material removal in detail work on wood, plastic and similar materials. It is ideal for shaping, creating profiles and precise engraving, offering optimum control in precision work.

Technical data:

• Type: high-speed cylinder cutter for carving/engraving

• Model: 196 / 26150196JA

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Pack quantity:

• 1 × Dremel 196 cutter

Technical applications:

• Shaping and carving of wood, plastic, laminates and similar materials

• Creating grooves, profiles, hollows and holes on flat or curved surfaces

• Engraving and decoration of soft materials

The Dremel 199 is a high-speed cutter (carving/engraving bit) of 9.5 mm for rotary tools, designed for carving, engraving, grooving and material removal in detail work on various materials. It is a versatile accessory for shaping, creating profiles and grooves or making tapered holes, ideal for precision work.

Technical data:

• Type: high-speed cutter for carving/engraving

• Model: 199 / 26150199JA

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~39 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Pack quantity:

• 1 × Dremel 199 cutter

Technical applications:

• Shaping and carving of wood, plastic, laminates and similar materials

• Creating grooves, profiles, hollows and tapered holes on flat or curved surfaces

• Engraving and decoration on soft materials

The Dremel 401 is a mandrel (screw pin) for rotary tools, designed for mounting and securing polishing and cleaning accessories on Dremel multi-tools. It is particularly suitable for use with felt wheels and other accessories intended for finishing.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: 401

• Shank diameter: 3.2 mm (≈ 1⁄8″) standard for rotary tools

• Total length: approx. 39 mm

• Material: wear-resistant metal

• Shape: screw pin with threaded head for mounting accessories

• Maximum operating speed: up to 35 000 rpm

• Pack quantity: 3 pieces

• Compatibility: Dremel-type rotary tools and multi-tools with 3.2 mm chuck

Main features:

• Ergonomic mounting: threaded head that allows accessories such as felt wheels and polishing bits to be screwed on directly.

• Ease of use: robust and intuitive design for a quick accessory change.

• Versatility: used mainly with accessories intended for polishing and finishing.

Technical applications:

• Securing felt polishing wheels (e.g. models 414, 422, 429) for bright finishes on metals and plastics.

• Mounting polishing bits for surface finishing and precision in detail work.

The Dremel 402 is a mandrel (screw pin) for rotary tools, designed for mounting cutting discs, polishing discs and other centre-hole accessories on Dremel multi-tools. It is one of the basic accessories required to use various discs and finishing wheels correctly with the tool.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: 402

• Shank diameter: 3.2 mm (1/8″) – standard for Dremel rotary tools

• Material: hard-wearing metal

• Shape: pin with slotted screw head for tightening with a flat-blade key

• Maximum operating speed: up to 35 000 rpm

• Quantity: 4 pieces

• Compatibility: rotary multi-tools Dremel and other compatible with 3.2 mm chuck

Main features:

• Accessory fixing: allows you to mount cutting discs, polishing discs and other centre-hole accessories, holding them firmly in place during rotation.

• Slotted screw head: designed to be tightened or loosened with a flat-blade key or the key supplied with many Dremel kits, making accessory changes easier.

• Versatile use: compatible with a wide range of cutting and polishing accessories, including various Dremel cutting discs.

Technical applications:

• Mounting of abrasive cutting discs for operations on metal, wood and composite materials.

• Fixing of polishing discs or finishing wheels for removing micro-scratches or polishing.

• Use as a basic component for operations requiring centre-hole accessories on rotary multi-tools.

The Dremel 402JA is a mounting mandrel (screw pin) for rotary tools, designed for fixing cutting discs, polishing discs and other centre-hole accessories to Dremel multi-tools. It is one of the essential accessories for using various abrasive and finishing tools correctly with your multi-tool.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: Item 402JA

• Contents: normally 4 pieces in the pack

• Shank diameter: 3.2 mm (1/8″) – standard for Dremel tools

• Material: sturdy metal

• Shape: screw pin with slotted head

• Compatibility: all Dremel rotary multi-tools with 3.2 mm chuck

• Maximum operating speed: up to 35 000 rpm

• Use of the pin: for fixing cutting discs, polishing discs, brushes and other accessories with a centre hole

Main features:

• Allows secure mounting of abrasive and polishing discs on the Dremel tool.

• Slotted screw head for tightening/ loosening with a flat-blade screwdriver.

• Multi-pack, useful for having spares or quick replacements.

Technical applications:

• Fixing of abrasive cutting discs for metalworking.

• Mounting of polishing discs on felt or other backings.

• Assembly of various centre-hole accessories for a range of cutting and finishing applications.

The Dremel Item 405 is a nylon bristle brush for rotary tools, designed for cleaning, light deburring and polishing of surfaces. It is suitable for work on delicate or hard-to-reach materials, and can also be used with polishing paste to improve the surface finish of metal, plastic or other materials.

Technical data:

• Type: cleaning and polishing brush

• Model: Item 405

• Working diameter: 3.2 mm

• Shank diameter: 3.2 mm

• Bristle material: nylon

• Shape: compact paintbrush-style brush

• Accessory length: approx. 47 mm

• Recommended maximum operating speed: 15,000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm chuck

Technical applications:

• Cleaning of flat surfaces or grooves in plastic, steel and precious metals

• Light deburring and removal of surface deposits

• Fine polishing of cutlery, jewellery and metal surfaces (can be used with polishing compounds)

• Surface preparation before further finishing

The Dremel Art. 420 is a heavy duty abrasive cutting disc for rotary tools, designed for straight cuts in metal and other materials with greater strength and durability than standard cutting discs. It is suitable both for heavy-duty applications on ferrous materials and for work on wood, plastic and light building materials.

Technical data:

• Type: heavy duty abrasive cutting disc

• Model: Art. 420

• Working diameter: 24.0 mm (≈ 0,94")

• Disc thickness: ≈ 1.0 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Abrasive material: reinforced aluminium oxide

• Shape: disc with cutting along the edge

• Maximum operating speed: up to 35 000 rpm

• Mounting: with 402 screw mandrel

• Quantity: typically 1 piece

Technical applications:

• Straight cutting of ferrous and non-ferrous metals, including bars, sheet and tubes.

• Sectioning of bolts, screws and profiles.

• Cutting of thin wood, plastic, panels and composite materials.

The Dremel 422 is a felt polishing bit for rotary tools, designed for the polishing and surface finishing of metals, plastics and other materials. Its compact profile and felt construction also make it suitable for cleaning details, holes or hard-to-reach surfaces, and it can be used with or without polishing compound to obtain a smooth, shiny surface.

Technical data:

• Type: felt polishing bit/cylinder for rotary tools

• Model: Art. 422

• Working diameter: 10 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Material: abrasive polishing felt

• Shape: polishing cone/cylinder

• Recommended maximum operating speed: up to 20 000 rpm

• Compatibility: Dremel type rotary tools with a 3.2 mm chuck (use with a suitable pin/clamp)

Technical applications:

• Polishing of ferrous and non-ferrous metals (steel, brass, aluminium, silver, etc.)

• Finishing and polishing of plastics and perspex after abrasive operations

• Cleaning of details, corners and holes thanks to the conical shape

• Use with or without polishing compound/paste to obtain different finishes

The Dremel Art. 425 is a pressed felt polishing disc designed for rotary tools, ideal for achieving glossy, refined finishes on metals and plastic materials. It is intended for use with polishing compound and other polishing discs to obtain a brilliant result on machined surfaces.

Technical data:

• Type: felt polishing disc for rotary tools

• Model: Art. 425

• Working diameter: 22.5 mm (≈ 2.25 cm)

• Shank diameter: 3.2 mm (standard mandrel)

• Material: abrasive polishing felt

• Shape: circular disc

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

• Recommended maximum operating speed: up to approx. 20 000 rpm

• Mounting: by means of a mandrel/clamp suitable for polishing wheels

Technical applications:

• Polishing of metal surfaces such as steel, brass, copper, aluminium and stainless steel for a brilliant effect.

• Surface finishing of hard plastics after grinding and sanding.

• Use with polishing compound to obtain a higher level of shine on machined surfaces.

The Dremel 426 is a fibreglass-reinforced abrasive cutting disc for rotary tools, designed for straight cuts and slots in metal and a variety of other materials. It offers greater strength and durability than basic discs, making it suitable also for harder metals and heavy-duty use compared with standard discs.

Technical data:

• Type: fibre-reinforced abrasive cutting disc

• Model: Art. 426

• Quantity: packs available of 1 or 5 discs (variants available)

• Working diameter: 32 mm

• Disc thickness: approx. 1.1 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Abrasive material: aluminium oxide with fibreglass reinforcement

• Maximum operating speed: up to 35 000 rpm

• Max cutting depth: approx. 14 mm

• Mounting: with screw mandrel (pin) type 402

• Use: cutting along the edge only of the disc

Workable materials:

• Ferrous and non-ferrous metals, including hardened steel, aluminium, copper, brass, stainless steel

• Thin wood, plastic, plasterboard, light marble and brick (short cuts)

Technical applications:

• Making straight cuts and slots in metal, sheet metal and sections

• Cutting bolts, screws or metal bars with control and precision

• Cuts in composite or plastic materials during repair or modification work

The Dremel 429 is a felt polishing disc for rotary multi-tools, designed to achieve polished finishes and smooth surfaces on a variety of materials, with or without polishing compounds. It is one of the largest accessories in the Dremel polishing range, suitable when a particularly bright or smooth surface is required.

Technical data:

• Type: felt polishing disc for rotary tools

• Model: 429

• Working diameter: 26.0 mm

• Shank diameter: 3.2 mm

• Material: abrasive polishing felt

• Shape: circular disc

• Recommended maximum operating speed: 20 000 rpm

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck

• Mounting: with threaded mandrel 401 (required for fitting)

Technical applications:

• Polishing and surface finishing of ferrous and non-ferrous metals

• Refining surfaces in plastics and composite materials

• Removal of light machining marks before final polishing

• Preparing surfaces before finishing or painting treatments

The Dremel 430 is a mandrel with abrasive cylinder and abrasive band (60 grit) for rotary tools, designed for sanding, shaping and removing surface finishes on a wide range of materials. The abrasive band can be replaced quickly by loosening the top screw of the mandrel and allows the tool to be adapted to various abrasion operations.

Technical data:

• Type: mandrel with abrasive cylinder and abrasive band

• Model: 430

• Working diameter: 6.4 mm (1/4″)

• Abrasive grit: 60 (coarse)

• Shank diameter: 3.2 mm

• Total length: ~70 mm (approx. 2,75″)

• Abrasive material: aluminium oxide on mandrel band

• Maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck

Technical applications:

• Sanding, shaping and deburring of wood and wood-based materials

• Removal of rust or old finishes from metal surfaces

• Preparing surfaces in fibreglass, rubber or plastic before further processing

• Rough shaping of profiles or contours before fine finishing

The Dremel 431 is a set of replacement abrasive sanding bands for rotary tools, designed for sanding, shaping and removing material on a variety of surfaces. These 60 grit bands provide a medium-coarse abrasive action, suitable for finishing and surface preparation before further work.

Technical data:

• Type: abrasive bands / cylinders for sanding and shaping

• Model: Item 431

• Working diameter: 6.4 mm

• Abrasive grit: 60 (medium-coarse)

• Shank diameter: 3.2 mm (standard for rotary tools)

• Accessory length: approx. 13 mm

• Band width: ~9 mm

• Material: aluminium oxide abrasive

• Maximum operating speed: up to 35 000 rpm

• Pack quantity: typically a set of 6 bands

• Compatibility: used with mandrel 430 or equivalent for abrasive bands on rotary tools

Technical applications:

• Sands and shapes wood, plywood and composite panels

• Removal of rust and oxidation from metal surfaces

• Shaping of rubber, plastic and fibreglass surfaces

• Surface preparation before painting or further finishing

The Dremel 432 is a set of abrasive bands (abrasive cylinders) for rotary tools, designed for sanding, shaping and surface cleaning on different materials. The 120 grit aluminium oxide coating offers a good balance between material removal and finish, making these bands ideal for surface preparation and finishing.

Technical data:

• Type: abrasive bands/cylinders for abrasion and sanding

• Model: 432

• Working diameter: approx. 13 mm (½″)

• Abrasive grit: 120 (medium/fine)

• Shank diameter: 3.2 mm (standard for rotary tools)

• Maximum operating speed: up to ~35 000 rpm

• Quantity: normally sold in packs of several pieces (e.g. 6 bands)

• Compatibility: Dremel-type rotary tools with 3.2 mm mandrel

Technical applications:

• Sanding and shaping of wood surfaces and plywood

• Rust removal and cleaning of metal surfaces

• Shaping and finishing of rubber, fibreglass and plastic

• Surface preparation before painting or other finishing

The Dremel 438 is an abrasive cylinder for rotary tools designed for sanding, shaping and finishing surfaces and profiles on various materials. Thanks to its compact shape and suitable abrasive grit, it is effective on wood, metal, plastic and other materials, making this accessory versatile for detail work and surface preparation.

Technical data:

• Type: abrasive cylinder for sanding and shaping

• Model: Item 438

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (standard for rotary multi-tools)

• Abrasive material: aluminium oxide (medium grit)

• Shape: cylindrical with extended abrasive surface

• Accessory length: approx. 50 mm

• Recommended maximum operating speed: up to approx. 30 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding of surfaces and edges on wood and panels

• Shaping of irregular profiles and curved surfaces

• Removal of rust or light oxidation on metal

• Preparation of plastic or composite surfaces before finishing

The Dremel 439 is a replacement abrasive cylinder for rotary tools, used in combination with the mandrel and abrasive band to sand, shape and finish various types of surface. The medium grit makes it suitable for material removal and shaping on wood, metal, fibreglass, rubber and other similar materials.

Technical data:

• Type: abrasive cylinder for sanding/shaping

• Model: Item 439

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary tools)

• Abrasive grit: approx. 60 (medium)

• Material: abrasive on rotating cylinder

• Shape: abrasive cylinder

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm mandrel

Technical applications:

• Sanding and material removal on wood, plywood and fibreglass

• Removal of rust or light oxidation from metal surfaces

• Shaping of profiles and surfaces on materials such as rubber and plastic

• Surface preparation before finishing or painting

The Dremel 482 is a clamping collet for Dremel rotary tools, designed to hold securely bits and accessories with a thin 1.6 mm (≈ 1/16") shank. This type of collet ensures a secure grip of the accessory in the chuck, improving precision and stability during drilling, milling, engraving or other detail operations. It is part of the range of interchangeable collets used to adapt the tool to different accessory diameters.

Technical data:

• Type: clamping collet for rotary tools

• Model: Item 482

• Supported shank diameter: 1.6 mm (≈ 1/16″) (for accessories with a thin shank)

• Material: hard-wearing metal for a secure grip

• Compatibility: Dremel rotary tools with standard chuck (including use with flexible shaft)

• Use: secures the accessory in the chuck for precision work

• Installation: fits into the chuck and is tightened with the multi-tool's clamping nut

Technical applications:

• Holding 1.6 mm bits for drilling, engraving, milling or sanding on materials such as wood, metal or plastic.

• Improves stability and control in detail and precision applications.

The Dremel 536 is a circular carbon steel brush designed for rotary tools, ideal for cleaning, rust removal, rough polishing and preparation of metal surfaces before finishing. The steel bristles give a more aggressive abrasive action than brass or nylon brushes, making the accessory suitable for ferrous metals and steels.

Technical data:

• Type: circular steel brush for cleaning and deburring

• Model: 536

• Working diameter: approx. 9.5 mm

• Shank diameter: 3.2 mm

• Bristle material: carbon steel

• Shape: circular “brush-type” brush

• Accessory length: approx. 45 mm

• Maximum operating speed: up to 15 000 – 20 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Technical applications:

• Removal of rust, oxidation and flaking paint from metal surfaces

• Cleaning and preparation of ferrous metals before welding or coating

• Deburring of welded joints and sharp edges

• Rough polishing of metal before finer finishing

The Dremel 537 accessory is a brass brush for rotary tools designed for cleaning and surface finishing of relatively soft and delicate metals, ideal for removing oxidation and residues and for creating a satin or matt finish without scratching the surface. The brass bristles are non‑sparking and softer than steel, reducing the risk of damaging sensitive materials.

Technical data:

• Type: brass brush for cleaning/polishing

• Model: 537

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Bristle material: brass (wire brass)

• Shape: rotary brush

• Accessory length: approx. 48 mm

• Maximum operating speed: 15 000 rpm

• Compatibility: rotary tools with 3.2 mm shank (Dremel and compatible)

Technical applications:

• Cleaning of soft metal surfaces such as gold, bronze, copper and brass without generating sparks

• Surface finishing to achieve a satin or matt effect

• Removal of oxidation and residues from joints or hard-to-reach points

• Surface preparation before further machining or fine polishing

The Dremel 615 is a high-speed steel (HSS) router bit designed for compatible rotary tools, intended for rounding edges and chamfering corners on wood or similar materials. This accessory is ideal for decorative work, profile finishing and detail cuts on wood and soft materials.

Technical data:

• Type: router bit / bit for rounding corners on wood and soft materials

• Model: Item 615

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm

• Total accessory length: approx. 37 mm

• Material: high-speed steel (HSS)

• Recommended maximum operating speed: up to 35 000 rpm

• Guide pin: present, for stability and cutting precision

• Tool compatibility: Dremel rotary multi-tools with a 3.2 mm chuck or router attachment (e.g. 231 or 335)

Technical applications:

• Rounding and chamfering of edges and corners on wood

• Decorative cuts and finishing on panels and edges

• Detail work on soft materials such as wood, plywood, laminates, plastic and perspex

The Dremel 640 is a high-speed steel (HSS) router bit of 6.4 mm designed for rotary tools, ideal for V-grooves, decorative engraving and carving, especially in light or soft materials such as wood, plywood, laminates and plastic. It is also particularly suitable for decoration and finishing details and can be used with dedicated router/plunge accessories to optimise the depth of cut.

Technical data:

• Type: router bit for V-grooves in wood and soft materials

• Model: Art. 640

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (compatible with standard chucks)

• Accessory length: approx. 37 mm

• Effective working length: approx. 2.0 mm

• Material: high-speed steel (HSS)

• Recommended operating speed: up to 35 000 rpm

• Compatibility: rotary multi-tools with 3.2 mm chuck, including use with the Dremel router/plunge attachment for greater depth control.

Technical applications:

• Cutting V-grooves in wood and similar materials

• Engraving shapes, lettering or decorative profiles

• Inlay work and finishing on panels and composite surfaces

The Dremel 652 is a high-speed steel (HSS) straight cutter for rotary tools, ideal for making milling cuts, straight grooves, cut-outs and mortises in soft materials such as wood and plastic. It can be used with the dedicated Dremel routing attachments for greater precision and control in use.

Technical data:

• Type: straight cutter for milling, cut-outs and mortises

• Model: 652

• Material: high-speed steel (HSS)

• Shank diameter: 3.2 mm

• Working diameter: 4.8 mm

• Accessory length: approx. 36.0 mm

• Effective working length: approx. 1.4 mm

• Shape: straight cutting edges

• Maximum recommended operating speed: up to ~35 000 rpm

• Compatibility: rotary tools with 3.2 mm accessory chuck and with a routing attachment (e.g. ****)

Technical applications:

• Linear milling and engraving in softwood and hardwood

• Making grooves and mortises for joints

• Precision work on plastic, Plexiglas and similar materials

The Dremel 654 is a high-speed steel (HSS) straight router bit for rotary tools, designed for routing, grooving and straight cuts in materials such as wood, plastic and other soft or composite materials. The flat tip and cutting geometry make it possible to produce grooves, mortises, slots and linear cavities with control and precision, and it can be used with dedicated routing accessories such as guides or router tables.

Technical data:

• Accessory type: straight bit / router bit for linear routing

• Model: Art. 654

• Shank diameter: 3.2 mm

• Working diameter: 6.4 mm

• Overall accessory length: 36 mm

• Working length: ~2 mm

• Material: high-speed steel (HSS)

• Main use: straight routing and grooving in soft materials such as wood and plastics

• Recommended maximum operating speed: up to 35,000 rpm

• Compatibility: rotary tools with a 3.2 mm accessory chuck (Dremel and equivalents)

Technical applications:

• Straight grooves and mortises in wood and composite panels

• Internal cutting and finishing of recessed areas

• Preparation of recesses for light inlay work

The Dremel 7105 is a spherical diamond bit for rotary tools, designed for engraving, sculpting, shaping and material removal on hard or abrasive surfaces. This accessory has a coating of diamond particles that increase its resistance and effectiveness on materials that are difficult to work.

Technical data:

• Type: diamond bit for engraving / carving on hard materials

• Model: 7105

• Shank diameter: 3.2 mm

• Working diameter: 4.4 mm

• Accessory length: approx. 46 mm

• Material: steel with diamond coating for greater hardness and durability

• Shape: spherical bit / diamond disc

• Recommended operating speed: up to approx. 25 000–35 000 rpm (do not exceed the maximum values indicated)

• Compatibility: Dremel rotary tools and multi-tools compatible with a 3.2 mm chuck; does not require an additional chuck

Technical applications:

• Fine engraving and carving on glass, ceramic, porcelain, semi-precious stones

• Shaping and material removal on hardened and hard metals

• Detailed work on wood and other materials that are difficult to work with standard tools

The Dremel 9903 is a tungsten carbide engraving/carving cutter designed for rotary tools with a 3.2 mm shank, used to shape, smooth and remove material from hard surfaces with precision. This accessory is suitable for a wide range of applications on tough materials, delivering high performance even in demanding working conditions.

Technical data:

• Type: tungsten carbide engraving/carving cutter

• Model: 9903

• Shank diameter: 3.2 mm / 1/8″

• Working diameter: 3.2 mm

• Accessory length: approx. 39 mm

• Material: tungsten carbide (highly wear-resistant)

• Shape: rounded/cylindrical tip, ideal for engraving and material removal

• Maximum recommended speed: up to 30 000 rpm

• Compatibility: suitable for rotary tools with a chuck compatible with 3.2 mm accessories

Technical applications:
Engraving, shaping, material removal and detailing work on hard materials such as hardened steel, stainless steel, cast iron, ceramic, glass, plastic and hardwood.

Single tungsten carbide cutter with a ball tip for rotary tools, designed for engraving, shaping and material removal on hard surfaces.
The spherical tip geometry allows concave channels, curves and rounded details to be produced with control and precision on a wide range of materials, including metal and difficult-to-machine materials.

Technical data:

• Type: tungsten carbide cutter for engraving/shaping

• Model: Art. 9905

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Accessory length: 38.0 mm (approx.)

• Material: tungsten carbide (C‑2)

• Tip shape: spherical (ball tip)

• Maximum recommended operating speed: up to 30 000 rpm

Technical applications:
Engraving, shaping of concave profiles, material removal and fine detailing on hardened steel, stainless steel, cast iron, ceramic, non-ferrous metals, hardwood or plastic.

The Dremel 9910 is a tungsten carbide engraving/carving cutter suitable for rotary tools fitted with a chuck for 3.2 mm accessories. Designed for aggressive machining and particularly hard materials, it allows you to shape, smooth or remove material on complex surfaces with high precision.

Technical data:

• Type: engraving / carving cutter

• Material: tungsten carbide (highly wear-resistant)

• Shank diameter: 3.2 mm

• Working diameter: 3.2 mm

• Accessory length: approx. 39 mm

• Shape: conical tip for precision engraving and shaping

• Maximum recommended operating speed (indicative): up to 30 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a fitting for 3.2 mm accessories

Technical applications:
Engraving, carving, shaping and material removal on hard materials such as hardened metals, stainless steel, cast iron, ceramic, glass, hard plastic and wood. Also suitable for detail and finishing work on complex surfaces.