By Brand

Voltage Single-phase

Motor power (watt) 370

Grey grinding wheel (mm) 200x20x16

Wheel included Yes

Voltage Single-phase

Motor power (watt) 500

Weight (Kg) 15

Packaging (mm) 570X290X340

RPM 2800

Grey grinding wheel (mm) 220X20X16

Wheel included Yes

Voltage Single-phase

Motor power (watt) 150

Grey grinding wheel (mm) 150x16x12,7

Wheel included Yes

Voltage Single-phase

Motor power (watt) 150

Grey grinding wheel (mm) 125x16x12,7

Wheel included Yes

Voltage Single-phase

Motor power (watt) 500

Weight (Kg) 15

Packaging (mm) 520X290X340

RPM 2800

Grey grinding wheel (mm) 200X20X16

Wheel included Yes

Brush (mm) 150X20X16

Brush included Yes

Industrial bandsaw Femi 2200 XL with stand, 230V, 2000W motor, blade 2140x19x0,9 mm, max cut 200 mm (175 mm section). Manual arm descent, cast iron vice, integrated coolant lubrication system.

Voltage Three-phase

Motor power (watt) 850

Weight (Kg) 14

Packaging (mm) 570x290x340

RPM 2800

Grey grinding wheel (mm) 200x25x20

Voltage Three-phase

Motor power (watt) 850

Weight (Kg) 18

Packaging (mm) 570x290x340

RPM 2800

Grey grinding wheel (mm) 200x25x20

Wheel included Yes

Products geared towards industrial machining thanks to their great reliability and robustness

5-year warranty.

Powerful induction motors, reliable and quiet.

Integrated thermal safety protection (for motors > 500 W).

Compliant with CE standards.

Voltage Single-phase

Motor power (watt) 330

Grey grinding wheel (mm) 150x20x12,7

Wheel included Yes

Voltage Single-phase

Motor power (watt) 330

Grey grinding wheel (mm) 150X20X12,7

Wheel included Yes

Brush (mm) 150X20X16

Brush included Yes

Voltage Single-phase

Motor power (watt) 370

Weight (Kg) 10

Packaging (mm) 520X210X320

RPM 2800

Grey grinding wheel (mm) 150X20X16

Wheel included Yes

Pillar drill Femi 634RV PRO Range, 220V single-phase power supply, adjustable speed. For precision drilling in metal, wood and plastic.

Voltage Single-phase

Motor power (watt) 370

Weight (Kg) 12

Packaging (mm) 520X210X320

RPM 2800

Grey grinding wheel (mm) 150x20x16

Wheel included Yes

Brush (mm) 150x20x16

Brush included Yes

Motor power (watt) 1250

Power supply (Volt-Hz) 230 - 50

Weight (Kg) 25

Packaging (mm) 820x460x440

RPM 8000

Knife size (mm) 210x20

Base 0

Surface planing - Maximum planing width (mm) 210

Surface planing - Adjustable stock removal (mm) 0 ÷ 2

Surface planing - Upper table dimensions (mm) 744x210

Surface planing - Fence dimensions (mm) 500x90

Thickness planing - Maximum planing width (mm) 204

Thickness planing - Maximum planing height (mm) 120

Thickness planing - Adjustable stock removal (mm) 0 ÷ 2

Thickness planing - Feed speed (mt/min) 8

Voltage Single-phase

Speed control 1 speed

Motor power (watt) 2000

Power supply (Volt-Hz) 230 - 50

Weight (Kg) 18

Packaging (mm) 600x340x430

Motor Universal

RPM 3000

Technical specifications

Powerful 2000 Watt motor for a higher cutting speed

Transmission made with a helical gear mounted on a bearing

Column diameter 46 mm

Electronically variable speed

Drilling speed: position 1 = 220-880 min-1; position 2 = 650-2550 min-1

Drilling capacity 80 mm

Chuck capacity: from 1,5 to 13 mm

Spindle-to-base distance: 280 mm

Height 660 mm

Worktable: 340x300x40 mm

Class 2 laser, wavelength 650 mm, power <1mW

Voltage Single-phase

Motor power (watt) 460

Weight (Kg) 27

Packaging (mm) 680x420x245

RPM 1400

Type Bench

Chuck type Key

Chuck (mm) 3-16

Speeds 12

230-2470

Height (mm) 845

Column diameter (mm) 60

Spindle stroke (mm) 60

Spindle taper B16

Spindle-to-column distance (mm) 126

Drilling capacity (mm) 16

Worktable (mm) 202x197

Technical specifications

The drill for those seeking performance and compactness

Keyed chuck with capacity from 3 to 16mm

Tilting worktable

Worktable raised and lowered by rack and pinion

Upper cover with safety microswitch

Base with integrated vice for Flexicut 1140E

With integrated vice.

Extreme portability.

Ideal for construction sites.

LED light.

Powerful 1100 Watt motor.

Electronic speed control.

Easy blade change.

Adjustable handle.

OPTIONAL: base with bench support.

Powerful two-speed three-phase induction motor, oil-lubricated gearbox

Cast iron arm, vice and swivel assembly

Sliding steel blade guide with bearings

Vice with quick-clamping device

Front lever for releasing the swivel, integrated into the base

Lubrication pump with aluminium body

Large handwheel for easier blade tensioning

Pressure gauge showing the blade tension level (600-1000 Kg/cm3)

Femi Multy 360 multi-function folding workbench, aluminium structure, max load 120 kg, telescopic legs with 3 heights (630/770/830 mm), 3 electrical sockets, extendable side supports with rollers. Weight 20 kg.

Cutting without lubrication

Easily transportable, 17 Kg

Maximum cutting capacity Ø 105 mm

2000 Watt motor with belt drive

Sturdy aluminium side extensions with integrated release lever

Radial cut ideal for very wide panels

Rotary table with automatic precision angle stops at 0°-15°-22.30°-30°-45°

Provision for 33° cutting angle

Double bevel for angled and bevelled cuts from 0° to 45° right and left

Laser and LED light included on the handle

Sliding side bases with cutting measurement indicator

Sturdy aluminium vertical clamp for holding workpieces

Technical specifications

Powerful 2000 Watt motor

Cutting angle with automatic stops at 0°-15°-22.5°-30°-45°

Lightweight and portable (14.5 Kg)

Large cutting capacity 340 x 90 mm

Workpiece support with graduated scale

Laser pointer

Sturdy aluminium vertical clamp

Double cutting slide bar for greater rigidity

Femi Job Line TR305i - Mitre saw

The TR305i mitre saw is fitted with a quiet 1400W induction motor; the maximum blade speed is 2850rpm. Equipped with a Ø305mm blade, it has a maximum cutting capacity at 90° of 170mm in width and 70mm in height. Its head tilts both to the right and to the left, allowing bevel cuts of up to 45°, with a maximum cut of 105mm in width and 70mm in height.

The TR305i mitre saw is fitted with an aluminium upper table. The structure of the saw is made entirely of die-cast aluminium. The maximum cutting capacity at 45° + 45° is 55mm in both height and width. The product features an ergonomically designed handle.

The TR305i is supplied as standard with a vertical clamp, a push stick, spanners, a dust bag and bar stop rods.

The product dimensions are 630x550x500mm and the weight is 25Kg.

Features:

Ergonomic handle design

Structure made entirely of die-cast aluminium

Quiet induction motor

Tilting head for bevel cuts

Cutting times reduced by up to 60% compared with a traditional saw thanks to the opposite direction of blade rotation («NG SYSTEM»)

Innovative friction blade tensioner for checking and adjusting the correct blade tension (patented)

Cutting angle adjustable from 0° to 60° left with quick lock at 45° and 60°

Powerful 1300 Watt motor with «Constant Speed» electronic speed control, current limiter and thermal protection

Double sliding blade guide, front and rear

A new floor-standing pillar drill, with self-tightening chuck, height 1635 mm, variable speed and digital display.

The digital display with rotation speed indicator, combined with the speed adjustment function, allows appropriate use of the drill according to the material to be drilled.

Speed adjustment function via external control : great versatility, precision and ease of use. The standard equipment is completed by the light for the work area and the graduated drilling depth adjustment.