Bosch polishing sponge, item no. 3608613000, with hook-and-loop fixing for common polishers. It spreads waxes, polishing pastes and sealants on paintwork, stone, plastic and non-ferrous metals, on flat or curved surfaces, for an even finish.
Tools
There are 2848 products.
Pad in soft sponge Bosch 2608612024 Ø 170 mm with hook‑and‑loop fastening for light polishing, buffing and finishing surfaces after sanding.
Beta 994PL spring tweezers with wide straight rounded and serrated tips, in stainless steel with PVC-coated handle. Length 150 mm.
Pack of 5 Bosch S 1211 K Special for Ice reciprocating saw blades, in stainless steel, for cutting ice, meat and bone. Length 300 mm, 3 TPI.
Standard disc Bosch Optiline 2608643071 Ø 85 mm with Ø 15 mm bore, 20 carbide (TCT) teeth and ATB profile for clean, precise cuts in wood and wood-based materials.
Stayer 369 drill with self-tightening chuck, which lets you change the bit by hand without a key. A tool for drilling in the workshop, at home and on building sites. Technical data to be confirmed: ask us for the details before ordering.
Stayer 12 V cordless drill driver with two lithium batteries, charger and case: two mechanical speeds, chuck up to 10 mm, drills up to 20 mm in wood. Model and battery capacity to be confirmed.
Stayer H2 mixing whisk, item no. 12.232, with M14 threaded fitting and a 140 mm paddle that pushes the material from the bottom upwards. For liquid and low-viscosity products on mixers with an M14 fitting.
Stayer H3 whisk for mixers, item no. 12.233: 140 mm propeller on an M14 threaded fitting, designed for liquid and low-viscosity materials that are stirred from the bottom upwards.
Stayer electric metal polisher with 180 mm self-adhesive backing pad, 1200 W, 6-speed electronic control from 600 to 3200 rpm and M14 fitting. Model code to be confirmed before ordering.
Stayer M 1200 series electric mixer with one H2 120 mm whisk, M14 fitting, two mechanical speeds and 6-position electronic speed control. For paints, cement and viscous materials. Exact model to be confirmed.
Stayer M 1600 1600 W electric mixer with M14 fitting, S1 continuous-duty motor, two mechanical speeds and 6-position electronic speed control. One whisk supplied: type and diameter to be confirmed.
Stayer MD15K electro-pneumatic demolition hammer with 30 mm hex fitting: according to the Stayer data sheet for the MD 15 B K it gives 1750 W, 45 J and 1900 blows/min, with double anti-vibration system. Model code to be verified.
Stayer WD3 whisk for the Stayer DM 1450 twin mixer, M18 fitting. The 114/140 dimensions given in the name have not been confirmed in a manufacturer's data sheet: please ask us before ordering.
Stayer SC250 PRO mitre saw combined with a Ø 250 mm blade and upper cutting table, designed for straight, 45°/90° and bevel cuts in wood, aluminium, laminates, PVC and plastic with safety and versatility.
Stayer SN 1470 metal-cutting band saw, item no. 1.5526: 1/2 HP single-phase motor, 1470 x 13 x 0.65 mm bimetal blade, cuts up to 100 x 150 mm at 90 degrees, arm tilting from 0 to 60 degrees, 22 kg.
Stella Bianca flat file for aluminium, from the special-use line: special cut with high chip clearance capacity. Sizes 8", 10" and 12" among the variants; 12" size and cut to be confirmed.
Stella Bianca series 038 annular cutter with a 19 mm Weldon shank for magnetic base drills, in HSS M2 at 64/65 HRC and re-sharpenable. Diameters from 12 to 50 mm with various cutting depths, plus pilot pin and adapters.
Stella Bianca flat pointed bundle file to UNI 5488 with bastard cut, for rough filing and deburring metals. Three lengths: 250 mm (item no. 001P3S), 300 mm (001P2S) and 350 mm (001P1S), with sections from 22 x 7.5 to 32 x 10 mm.
Stella Bianca cabinet rasp with bastard cut and handle, item no. 010C112M: fast rough removal of wood, 64 HRC carbon steel, three lengths from 200 to 300 mm with sections from 22 x 5 to 34 x 7 mm.
Stella Bianca cabinet rasp for wood with handle, second cut, item no. 010C208M: 64 HRC high-carbon steel, section wider and thinner than the half-round, lengths 8", 10" and 12".
Stella Bianca parallel flat file with bastard cut and handle, item no. 002P108M: the coarsest cut in the mechanics series, UNI 5487 standard, steel at 64 HRC. Five lengths from 4" to 12" among the variants.
Stella Bianca parallel flat file with handle, item no. 002P204M: UNI 5487 standard, second cut balancing stock removal and finish, hardness 64 HRC. Lengths 6", 8", 10" and 12" selectable among the variants.
Stella Bianca 8" (200 mm) parallel flat file with smooth cut, item no. 002P308M: 20x5 mm section, UNI 5487 standard, high-carbon steel at 64 HRC, for a high degree of finish on flat surfaces.
