Corded Tools

The Dremel Stylo+ is a corded electric multi-tool with a compact, pen-like design, intended for precision applications on a wide range of materials. Ideal for engraving, light sanding, polishing and cleaning, it offers variable speed and quick accessory change to suit different operating needs.

Technical data:

• Rated power: 9 W

• Supply voltage: 100–240 V

• No-load speed: 5 000–22 000 rpm

• Speed setting: variable

• Accessory change system: self-tightening chuck

• Weight: approx. 0.11 kg

• Tool length: approx. 16 cm

• Power cable: 2 m

• Vibration (average value): 2.5 m/s²

• Sound pressure level: approx. 70 dB(A)

• Accessories included: set of 15 accessories for engraving, sanding, polishing and cleaning (depending on version)

Technical applications:

• Engraving and carving on thin materials

• Fine sanding

• Cleaning and polishing of surfaces

• Creative finishing for hobby use

Portable tool powered by liquid butane gas with integrated tank, designed for soldering, brazing, heat shrinking and localised heating applications with a controllable high-performance flame. It reaches high temperatures in a short time and refills quickly for continuous use.

Technical data:

• Power supply: liquid butane gas

• Ignition: piezoelectric (no need for an external lighter)

• Tank capacity: 42 ml / 22 g

• Continuous burn time: approx. 75 minutes

• Flame temperature: up to 1.200 °C in open flame mode

• Hot air temperature: approx. 680 – 1.000 °C

• Soldering tip temperature: approx. 550 °C

• Tool weight: approx. 0.227 kg

• Compact dimensions: approx. 170 mm length × 60 mm width × 110 mm depth

• Typical supplied items (vary depending on the pack): catalyst, soldering tip, flame spreader, deflector, solder with sponge and metal case

The Dremel VersaTip is a multifunction butane gas-powered soldering iron, designed for a variety of cordless heat operations, including soldering, hot cutting, pyrography, brazing and paint stripping. The temperature is adjustable to suit different applications, while the built-in ignition system allows a quick and easy start. The kit includes several interchangeable accessories to cover different modes of use.

Technical data:

• Power supply: liquid butane gas (fuel not included)

• Ignition: built-in piezoelectric

• Maximum temperature: approx. 1.200 °C (open flame)

• Hot air temperature: approx. 680 °C

• Tip temperature: approx. 550 °C

• Tank capacity: ~12 ml of gas (~7 g)

• Operating time: up to ~90 minutes with a full tank (depends on use)

• Tool weight: approx. 0.135 kg

• Dimensions (approx.): 19 cm length × 2.5 cm width × 2.5 cm depth

• Mode of use: cordless for maximum mobility

• Accessories included: several interchangeable tips for soldering, hot cutting, pyrography, flat torch and more depending on the kit selected

Technical applications: light soldering of wires/thin metals, brazing, thermal cutting of thin materials, pyrography on wood/plastic, removal of paints or coatings with heat.

Fervi magnetic drill item 0518/20 with liquid cooling, drilling capacity ø 20 mm, Weldon shank ø 19.05 mm, 900W motor, magnetic force 8500 N. Weight 18.5 kg.

The Festool DWC 18-2500 HPC 4,0 I-Plus drywall screwdriver is designed to meet the need for continuous screwdriving that requires a high-performance tool for continuous work.

This light, compact cordless screwdriver, thanks to its practical front magazine for collated screws from 25 to 55 mm, allows you to keep one hand free, improving productivity as well as the quality of the result.

Since working with plasterboard involves a large amount of dust, Festool has made this practical auto-feed screwdriver, which is easy to dismantle for daily cleaning and maintenance.

Usable with the depth stop, it allows your DWC 18-2500 HPC 4,0 I-Plus to be adjusted in increments of 0.1 mm, ensuring constant screwdriving depth and avoiding any risk of error.

The 576498 Duradrive drywall screwdriver is light and compact, suitable for continuous operations, and designed with a perfectly balanced centre of gravity, making it well suited to continuous work and serial screwdriving.

This professional power tool can also be powered by the new Airstream lithium batteries, which deliver extraordinary power and guarantee fast charging when combined with the SCA 8 charger.

Built with a powerful brushless EC-TEC motor, it offers extreme durability as well as incredible power, suited to professional requirements.

The motor of this power tool runs only when screwing, even in the practical automatic mode with which it is built. The Festool DWC 18-2500 HPC 4,0 I-Plus 576498 screwdriver ensures a greater number of screws per battery charge.

Battery-powered, it is ideal for assembling drywall structures and fixing plasterboard panels and metal and wood substructures.

The DWC 18-2500 HPC 4,0 I-Plus 576498 drywall screwdriver is supplied with 2 BP 18 Li 4,0 HPC-ASI batteries, TCL 6 rapid charger, charger, depth limiter, scaffold holder, magnetic bit holder, 2 long PH 2 bits, PH 2 bit, belt clip and Systainer SYS 3 M 187 case.

FESTOOL DIAMOND CUTTING SAW + RAIL DSC-AG 125 complete with disc.

Precise dust-free cutting.

Cutting system with efficient dust extraction, protects health

Can be used on the Festool guide rail for precise cuts

Guide plate with smooth-running rollers for secure guidance on the workpiece

The window gives a clear view of the cutting point

Plunge function: the cut can be started at any point in the material

Main applications

Fast, dust-free cutting of mineral materials

Cuts for doors/windows, floor expansion joints, grooves for lines

Technical data

Power 1400 W

No-load speed 3500 - 11000 min⁻¹

Ø discs 125 mm

Lateral distance 32 mm

Front distance 78 mm

Cutting depth without/with guide rail 27/23 mm

Ø dust extraction connection 36/27 mm

Weight hood/system 2,2/4,1 kg

Maxima Caromax 1800 dry core drill, 1800W power, 33.000 blows/min micro-percussion, maximum diameter 205 mm, dual clutch, M18 connection. Weight 5.2 kg.

Maxima Caromax 160 water core drill system, combining the 2150W Caromax 210 A core drill and the aluminium Column 200. Maximum capacity 200 mm, column tiltable to 45°, anchoring by plug or vacuum. Made in EU, CE certified.

The CAROMAX 800 is a high-speed manual water-cooled core drill designed for drilling ceramic materials, porcelain stoneware, granite, marble and glass mosaic, with drilling diameters that can be varied by means of an electronic speed selector and an integrated cooling system. The kit included comprises three core bits with diameters of 6 mm, 8 mm and 10 mm, quick adapters and centring and water collection accessories.

Technical data:

Power input: 800 W – 230 V

Water tank capacity: 1 L

Maximum drilling diameter: Ø 60–68 mm

No-load speed 1: 3 600 rpm (holes Ø 20–68 mm)

No-load speed 2: 6 400 rpm (holes Ø 6–20 mm)

Maximum drilling depth: 60 mm

Quick coupling for core bits: 1/2″ BSP

Integrated PRCD safety switch

Weight: 3.4 kg

Supplied with:

1 × core bit Ø 6 mm

1 × core bit Ø 8 mm

1 × core bit Ø 10 mm

3 × quick adapters

Centring system

Water collection kit

Carry case

Milwaukee AS 30 LAC Class L professional vacuum cleaner, 30 litre tank, 1200W, air flow 4500 l/min, vacuum 250 mbar. Automatic filter cleaning, washable PTFE filter, automatic start socket for power tools. Wet and dry.

Bosch GEX 40‑150 Professional is a corded random orbital sander (random orbital sander) with a 400 W motor and 150 mm plate, designed for sanding, paint removal and professional finishing on wood, paint, filler and mineral surfaces. Equipped with vibration damping technology and an optimised dust extraction system, it ensures comfortable use and uniform results in joinery, building and workshop applications.

The Rupes GM62/072/I belongs to the GM62 series of professional angle grinders, power tools suitable for cutting and grinding on metal, concrete and various materials using a Ø 230 mm disc. The technical data shown below refer to the official specifications of the GM62 versions (72 V / 48 V), which share the same fundamental mechanical characteristics of the range.

Technical data:

Spindle/disc thread: M14 (standard for professional tools)

Power consumption: 2,000 W

No-load speed: 6,000 rpm

Disc diameter: Ø 230 mm

Spindle lock: yes

Disc guard: integrated protective guard

Side handle: can be fitted on either side

Electrical insulation: parts insulated with special resins for greater protection and durability

Approximate weight: approx. 4.2 kg

The Rupes GM62 220V is an angle grinder with a 230 V ~ 50 Hz power supply, designed for cutting, grinding and deburring on metal, concrete and other materials with a Ø 230 mm disc. The technical data are based on the official specifications of the GM62 series.

Technical data:

Operating voltage: 230 V ~ 50 Hz

Power consumption: 2,000 W

No-load speed: 6,000 rpm

Disc diameter: Ø 230 mm

Spindle thread: M14

Spindle lock: yes

Side handle: can be fitted on the right/left

Disc guard: integrated protective guard

Approximate weight: approx. 4.2 kg

The Rurmec P500 is an electric wall sander designed to sand, clean and smooth plaster, plasterboard and masonry surfaces, as well as to remove layers of paint and surface imperfections. It is prepared for connection to external extraction systems and features electronic speed control to suit different operating needs.

Technical data:

Supply voltage: 220 – 240 V

Power input: 1,200 W

No-load speed: 650 – 1,300 rpm

Ø backing pad: 225 mm

Tool length: 500 mm

Approximate weight: 3.5 kg

Electronic speed control to suit different surfaces

Electronic motor protection for greater reliability

Dust extraction ready via dedicated connector

Standard supply: case, extraction connector, abrasive discs (9 pieces with grits 80‑120‑180), 2.8 m power cable, instructions

Skil 0705AA electric lawn mower, 1000W 230V motor, 32 cm cutting width, adjustable cutting height, grass collection box. For small gardens.

SKIL 1033 ME ROTARY HAMMER 850W SDS SHANK

Efficient pneumatic hammer mechanism

Features: 1.

Hammering, 2.

Drilling without hammering and screwdriving 3.

Spindle lock for light chiselling

Suitable for SDS + accessories

Ergonomically shaped handle

Softgrip rear and side handle

Speed control switch with lock-on button for continuous operation and speed preselection

Safety clutch to protect against drill jamming

Reverse

Technical data

Cat № F0151033ME

Power consumption 850

Impact energy 2.8 J

No-load speed 0 -.

950 rpm.

Maximum speed at impact 4500 min.

Maximum drilling capacity in steel 13 millimetres

Maximum drilling capacity in concrete 24 millimetres

Maximum drilling capacity in wood 40 millimetres

Weight 2.8 Kg

Powerful 1200 Watt motor for effortless polishing of large surfaces

Compact design and light weight reduce fatigue when polishing large surfaces

Speed selection for all polishing jobs

Controlled start thanks to soft start

Constant speed electronics ensure optimum polishing results even under the heaviest loads

Backing pad with Velcro for easy and quick accessory changes

Lock-on switch for continuous use

Soft D-handle offers perfect control

Powerful 850 W pneumatic rotary hammer for effortless drilling in concrete

Four functions: 1. hammer drilling; 2. hammer lock for normal drilling; 3. rotation lock for light chiselling work; 4. chiselling with free rotation for maximum freedom of movement

"SDS+" system for very quick bit changes

Ergonomic handle for maximum comfort during use

The safety clutch protects both the operator and the tool if the bit jams

Variable speed switch with lock button for continuous working

Speed preselection wheel to set the right speed for every job

Soft handle for easy use and optimum tool control

Forward/reverse switch to change the direction of rotation of the tool easily

Swivelling side handle for better control and a secure two-handed grip

Adjustable depth rod to preset the hole depth

Very compact and lightweight design (only 1.3 kg)

Jigsaw ideal for all common cutting jobs in and around the home

"Twistlock" for self-tightening blade change and solid blade clamping

No spanner needed to adjust the base angle

Base angle tilts up to 45° for precise bevel cuts

Chip blower function to keep the cutting line clean and easy to follow

Integrated dust extraction adapter

Large, comfortable switch with lock-on button for continuous working

3 blades supplied

Material selector with four settings: always the right setting for every job

Variable speed control for high-precision cuts in different materials

Simple and quick tool-free blade change with the 'Clic' system

The dust blower switch keeps a clear view of the cutting line at all times

Base angle tilts right/left up to 45° for precise bevel cuts

Large, comfortable switch with lock-on button for continuous working

Adapter included for connecting a vacuum cleaner if necessary

Soft handle for a better and more comfortable grip

Sanding base in different shapes for large surfaces and corners

Three special profiles for sanding hard-to-reach surfaces

Easy 'Click' system for changing the profiles or rotating the triangular (delta) tip

Special flexible profile that adapts to rounded shapes

Effective orbital motion and powerful motor for perfect sanding

Integrated dust extraction system with microfiltration system for clean working

Adaptor included for connecting a vacuum cleaner when necessary

Dust-protected ball bearings ensure a longer service life

The triangular (delta) tip can be rotated twice to extend its service life

Ergonomic handle design for simple one-handed use

Soft non-slip grip for comfortable continuous work

Low weight for effortless working even on vertical surfaces

Easy replacement of the abrasive sheet (hook-and-loop fastening system)

Low noise and vibration levels

Three tools in one: delta sander, orbital sander and random orbital sander

Effective orbital action and powerful motor for fast, rapid material removal

Integrated dust extraction with vacuum connection for maximum dust extraction and a cleaner working environment

Two speed settings for controlled material removal

Easy replacement of the abrasive sheet with hook-and-loop fixing

The foam part of the triangular (delta) tip can be rotated to extend its life

Multifunctional backing pad for sanding large surfaces as well as hard-to-reach areas

The backing pad sands without scratching (the short run-down time when switching off avoids damaging the workpiece when the tool is switched off)

Ideal for fine or extra-fine sanding and for polishing curved and flat surfaces

2-speed impact drill - 1050 W - Skil 13 mm metal single-sleeve chuck

keyless Automatic spindle lock for quick and easy accessory changes

Variable speed control with lock-on button for continuous use

Dial speed preselection for optimum working

Adjustable side handle for two-handed operation in any application

Brand : Skil

Supplier reference : HD1E6745GB

Product type : impact drill

Colour : red

Working material : wood, metal, stone

Chuck type : keyless

Drilling diameter : Steel: 13 mm Stone: 20 mm Wood: 50 mm

Power : 1050 W.

Weight : 2.6 kg

SKIL MULTISAW 5330AA SAW + WOOD AND DIAMOND BLADES

When you need to cut any type of material, the quality of the tool we use is essential if we want the cut to be clean and precise.

In this respect we know that a perfect cut can only be guaranteed by a good power tool, in particular an electric saw with the right power and a good blade, not to mention the great saving in terms of effort.

The one we want to bring to your attention is a Skil circular saw, specifically the 5330 AA Multisaw, as the most recent expression of an extraordinary history.

It was in fact Edmond Michel who in 1924 invented the first portable electric circular saw, the famous Skilsaw, which allowed the enterprising inventor to found, in the same year, The Michel Electric Handsaw Company that today we all know as Skil.

The Skil 5330 AA Multisaw is a very practical circular saw capable of cutting a wide range of materials (wood, laminate, ceramic tiles, aluminium and plastic), it is powerful thanks to a 600 Watt motor and has a high cutting depth of 28.5 mm.

The compact and lightweight design makes the saw easy to use with one hand, allowing maximum freedom while working.

TECHNICAL SPECIFICATIONS

Cutting capacity at 90°: 28.5 mm

Power input: 600 Watt

No-load speed: 6,000 rpm

Shaft diameter: 10 mm

Blade bore diameter: 89 mm

Minimum blade diameter: 85 mm

Weight: 2 kg

Voltage and frequency: 220-240 V/ 50-60 Hz

The Skil Orbital Sander is a powerful 300 Watt orbital sander with a large sanding surface of 115 x 230 mm.

Bag:

The Skil Orbital Sander is supplied in a Skil Masters bag with dust box, vacuum cleaner adaptor, three abrasive sheets and a hole punch plate.

Speed:

The Skil Orbital Sander offers variable speed, allowing controlled material removal on different surfaces and letting you adjust the working speed.

Filter:

The integrated dust collection system with dust box and dust filter keeps the working environment cleaner.

WEIGHT 6.4 Kg

Power input 1200W

Sanding surface 100x155 mm

Belt speed 250-480 m/min.

Belt size 100x610/100x620 mm

Spit 351 pneumatic hammer for professional demolition and building applications.

Spit SG1 25E pneumatic sander with vacuum cleaner and AC 160 accessories for professional sanding operations with integrated dust extraction.

The Stayer 369 drill is a compact and reliable power tool, designed for drilling and screwdriving in wood, metal and light masonry. Fitted with a keyless chuck, variable speed and reversible rotation, it ensures precision, control and speed of use. The ergonomic design provides comfort and stability even during prolonged use.

Ideal for: advanced domestic use and light professional applications.

The STAYER LU 260 CE is an electric polisher designed for finishing operations on metal surfaces, with precise speed control and robust construction.

Technical data:

Motor power: 1,200 W

Variable speed: 600 – 3,200 rpm (6 levels)

Disc/plate diameter: Ø 180 mm

Connection: M14

Adjustable auxiliary handle

Spindle lock button

Weight: approx. 3 kg

Accessories included: rubber backing plate, wool bonnet, service spanner

The Stayer M 1200 C is an electric paddle mixer with an H2 Ø 120 mm mixing paddle, designed for mixing paints, liquids, mortars and materials of varying viscosity by means of electronic control and two mechanical speeds.

Technical data:

Motor power: 1,200 W

No-load speed: 200‑400 / 350‑700 rpm

Chuck connection: M14

Supplied mixing paddle diameter: Ø 120 mm (H2)

Tightening torque: 20.5 Nm

Weight: approx. 4.8 kg

Electronic speed control: 6 speeds

Mechanical speeds: 2 gears

The Stayer M 1600K is an electric paddle mixer with an M14 connection and one mixing paddle supplied (H3 Ø 140 mm), designed for mixing liquid and viscous materials with electronic speed control and two mechanical speeds.

Technical data:

Motor power: 1,600 W

No-load speed: 300 – 650 rpm

Chuck connection: M14

Supplied mixing paddle diameter: Ø 140 mm (model H3)

Tightening torque: 17 Nm

Speed configuration: 2 mechanical speeds + 6-level electronic speed control

Weight: approx. 6 kg

Body: aluminium construction

Soft start (progressive start-up): present

Standard supply: 1 H3 Ø 140 mm mixing paddle, PE‑HD case

The Stayer MD15K is a single-function electric demolition hammer designed for demolition applications with a 30 mm hexagonal bit, with compact construction and an anti-vibration system.

Technical data:

Function: demolition

Motor power: 1,750 W

Impact rate: approx. 1.380 ipm

Impact energy: 45 J

Tool holder: 30 mm hexagonal

Weight: approx. 15 kg

Anti-vibration system (VAT – Vibration Absorbing Technology)

Side handle

Typically supplied with: chisel and bit included

The Strike Twin Blade is a portable electric saw fitted with twin counter-rotating blades, designed for multi-material cutting with reduced reaction forces and greater cutting stability. The twin counter-rotating disc technology minimises kickback, allowing a uniform cut on thin sections of different materials.

Technical data (115 mm model):

Motor power: 1050 W

Blade diameter: 115 mm

Cutting system: twin counter-rotating blades

No-load speed: approx. 5 500 rpm

Useful cutting depth: ~25 mm

Approximate weight: ~2.8 kg

Integrated blade lubrication system (suitable for mild steel and light alloys)

Double protective guard

Dust extraction connection

Function: portable twin-blade electric saw for cutting metal, aluminium, plastic, wood and light building materials with reduced tendency to kickback thanks to the opposite rotation of the blades.