Automation & Power Transmission

1.1/2" triplex plate wheel sprocket, designed for drives that require high strength and the ability to drive several chains at the same time.

1.1/4" duplex plate wheel sprocket, ideal for drives that require strength and the ability to run two chains at the same time.

1/2" duplex plate wheel sprocket, designed for light drives that require the simultaneous rotation of two chains with reliability and service life.

Plate wheel sprocket 1/2" simplex, ideal for light drives that require the rotation of a single chain with reliability and durability.

Plate wheel sprocket 1/2" triplex, ideal for light drives that require the simultaneous rotation of three chains with reliability and durability.

Plate wheel sprocket 3/4" duplex, ideal for light drives that require the simultaneous rotation of two chains with reliability and durability.

Plate wheel sprocket 3/4" simplex, ideal for light drives that require the rotation of a single chain with reliability and durability.

3/4" simplex plate wheel sprocket, ideal for light drives that require reliability and the rotation of a single chain.

Plate wheel sprocket 3/4" triplex, ideal for light drives that require the simultaneous rotation of three chains with reliability and durability.

Plate wheel sprocket 3/8" duplex, ideal for light drives that require the simultaneous rotation of two chains with reliability and durability.

3/8" simplex plate wheel sprocket, ideal for very light drives that require the rotation of a single chain with reliability and service life.

5/8" duplex plate wheel sprocket, ideal for light or medium drives that require the simultaneous rotation of two chains with reliability and service life.

5/8" simplex plate wheel sprocket, ideal for light or medium drives that require the rotation of a single chain with reliability and service life.

5/8" triplex plate wheel sprocket, ideal for light or medium drives that require the simultaneous rotation of three chains with reliability and service life.

⚡ Sold by rib: make sure you add the number of ribs required to the quantity (e.g. Ribs = 4 - Quantity = 2 you will receive 2 belts of 4 ribs).
The Poly‑V belt, section J is a multi-rib belt designed to transmit power efficiently on grooved pulleys. It is flexible, compact and suitable for transmissions with several parallel ribs.

Seal type Polypac B 165125 with dimensions 42 mm (D) × 32 mm (d) × 11 mm (E), designed for sealing on the rod of hydraulic cylinders. Compact rubber construction with anti-extrusion support for mechanical and hydraulic use.

Seal type Polypac B 216177/1 with dimensions 55 mm (D) × 45 mm (d) × 10 mm (E), designed for rod sealing in hydraulic cylinders and mechanical applications with reciprocating motion.

Seal type Polypac B 236196 with dimensions 60 mm (D) × 50 mm (d) × 10 mm (E), designed for rod sealing in hydraulic cylinders and mechanical applications with reciprocating motion.

Seal type Polypac B 401354 with dimensions 102 mm (D) × 90 mm (d) × 9.6 mm (E), designed for rod sealing in hydraulic cylinders and mechanical applications with reciprocating motion.

Seal type Polypac B 433334 with dimensions 110 mm (D) × 85 mm (d) × 13.5 mm (E), designed for rod sealing in hydraulic cylinders and mechanical applications with reciprocating motion.

Polypac B type seals, rod seals for hydraulic and pneumatic cylinders, available in various sizes (e.g. B 075047 → 19×12×6.3 mm … B 188157 → 48×40×6.5 mm), suitable for various rod diameters and mechanical applications.

Polypac B type seals from series 196118 to 295255, designed for sealing on the rod of hydraulic cylinders and mechanical applications. Made of elastomeric rubber with anti-extrusion support, they ensure effective sealing against fluids and contaminants in transmissions and in cylinders with reciprocating motion.

Polypac B type seals in the range from 300225 to 444393, designed for rod sealing in hydraulic cylinders and mechanical applications requiring protection against fluid leakage and contamination. These seals are available in various inner/outer diameter and thickness sizes to suit different rod diameters.

B series rod seals in fabric-reinforced rubber and NBR in a single piece, ideal for single-acting hydraulic cylinders. Available in various sizes, they offer high resistance to abrasion and extrusion.

CH series packing seals in fabric-reinforced rubber for double-acting hydraulic cylinders. Complete set of sealing elements for fitting on pistons, ideal for industrial applications at medium pressures.

CH series packing seals in fabric-reinforced rubber for pistons of double-acting hydraulic cylinders. Available in sets of 3 or 5 elements, suitable for medium pressures and fitting on one-piece pistons.

CH series packing seals for high-reliability hydraulic cylinders. Made up of multiple fabric-reinforced rubber elements, ideal for one-piece double-acting pistons under medium loads.

D11W Balsele series seals for pistons of hydraulic and pneumatic cylinders. Reinforced one-piece NBR with fabric and POM anti-extrusion ring, for medium and high pressures.

DBM series seals for double-acting pistons made up of 5 elements: NBR, polyester and POM. Ideal for one-piece pistons in standard operating conditions with pressures up to 30 MPa.

DBR series seal code 224177 for applications on hydraulic cylinder pistons. Robust solution with anti-extrusion rings to ensure reliable sealing in standard operating conditions.

DPC series seals for pistons of double-acting hydraulic cylinders. Made up of NBR and POM elements, they operate at up to 70 MPa with excellent extrusion resistance.

DPS series seals for pistons made up of fabric-reinforced NBR and POM rings. Designed for pressures up to 35 MPa, ideal for double-acting cylinders in industrial applications.

DS series reinforced seals made up of separately moulded elements. Self-acting operation with high wear resistance and extended operating temperatures for demanding applications.

DSM Selemaster series seals for pistons in extremely severe conditions. Reinforced multi-element structure for high and very high pressures, resistant to misalignment and vibration.

E/DWR series guide rings for pistons in reinforced acetal resin. Moulded with tight tolerances to guide moving cylindrical parts and prevent metal-to-metal contact.

EUD Euroseal series seal for pistons in polyurethane with NBR energiser ring and integrated guide rings. Dimensions 70x58x20,5 mm, ideal for double-acting cylinders with pressures up to 40 MPa.

GS series seals for applications on cylinder rods or pistons. Compact and versatile design, suitable for standard industrial uses with good wear resistance.

I/DWR series guide rings for rods in acetal resin. Precision-moulded to guide the cylinder rod, prevent metal-to-metal contact and absorb radial forces.

SM Selemaster series seals for rods in extremely severe conditions. Reinforced multi-element structure for high pressures up to 70 MPa, resistant to misalignment and vibration.

URFU series seals with self-acting operation, tight tolerances and precision profiles. High operating temperature and exceptional wear resistance for demanding applications.

WRM series single-acting wipers in elastomeric compound. Profile designed for great stability in the housing, ideal for protecting rods from dirt and external contaminants.

WRM series wipers in elastomer for cylinder rods. Continuation of the range with larger dimensions, maintaining the same reliability and optimum protection.

WRS series wipers for protecting hydraulic cylinder rods. Specific design to ensure effective cleaning action and long life in industrial operating conditions.

Polyurethane lip seals, available in sizes from 11×6 mm to 48×40 mm, ideal for industrial, hydraulic and pneumatic applications where excellent wear resistance, elasticity and reliable sealing are required.

Polyurethane lip seals, available in sizes from 50×30 mm to 130×120 mm, designed for industrial, hydraulic and pneumatic applications that require excellent wear resistance, elasticity and reliable sealing on large cylinders and shafts.

The pre-bored aluminium pulley dia. 60 mm, 2 grooves, section A is a lightweight and strong component, designed for double V-belt drives. The 19 mm bore is fitted with a keyway for the coupling key, allowing secure and immediate mounting on the shaft.
⚠️ Note: the photo is for illustrative purposes only; the actual product may differ slightly in appearance.