Lavor Surfer surface cleaner, item no. 6.008.0151: an accessory for Lavor pressure washers, to be used on terraces, patios, porches and walls. Made in Italy, for cleaning large outdoor surfaces.
Workshop & Equipment
There are 663 products.
Lavor Tucson 1509 GL cold water pressure washer, item no. 36089-00043: 220 V power supply and 150 bar pressure, for cleaning vehicles, surfaces and equipment.
Lavor Tucson 1713 GL cold water pressure washer, item no. 36089-00044: three-phase 400 V, 170 bar working pressure (190 bar maximum), 780 l/h, pump with three ceramic pistons and a 10 m hose.
Accessory-side sleeve D.40 for Domus-Taurus vacuum cleaners Lavor Wash, item no. 00014-02333. Spare part for the side where the accessories are connected, diameter 40 mm.
Lavor Wash adjustable pressure lance, item no. 10001-09268. Continuous adjustment takes the jet from low to high pressure, adapting it to the dirt to be removed.
Kit of 10 replacement paper bags Lavor Wash, item no. 5.212.0022, for Domus and Taurus vacuum cleaners. A practical stock for replacing a full bag without stopping work.
HP extension tube 480 mm Lavor Wash, item no. 6.402.0002: short extension in the HP version to increase working reach; compatibility to be checked on your own model.
Accessory body for Lavor Wash vacuum cleaners with a 35 mm diameter, item no. 00080-02016. A base on which to fit the accessories. Compatibility to be checked on your own model.
Lavor Wash brass hose barb assembly with O-Ring, item no. 5.009.0340: spare part for renewing the flexible hose connection on the pressure washer. Compatibility to be checked on your own model.
Lavor Wash bristle accessory for a brush body, 35 mm diameter and 300 mm length, item no. 00080-02004. Compatibility to be checked on your own model before ordering.
Lavor Wash bristle accessory for a brush body 400 mm long, item no. 00080-01957, with bristles to loosen residues. Compatibility to be checked on your own model.
Lavor Wash brush body with a 40 mm diameter for Taurus and Domus, item no. 00080-01933. Compatibility with other models is to be checked on your own model.
D.40 brush nozzle for Lavor Wash ZEUS, DOMUS and TAURUS vacuum cleaners, item no. 3.754.0049: a suction accessory for cleaning surfaces and hard-to-reach spots.
L.400 brush kit for Lavor Wash professional vacuum cleaners, item no. 10001-09441: 400 mm brush. Compatibility and connection to be checked on your own model.
Lavor Wash accessory for carpets and wall-to-wall carpeting on a brush body 400 mm long, item no. 00080-01959. Compatibility to be checked on your own model.
Cartridge filter for GT Lavor Wash, item no. 10001-08248: replacement filter cartridge for Lavor Wash vacuum cleaners. Compatibility to be checked on your own model.
Cloth filter bag with gasket Lavor Wash, item no. 5.209.0009: spare part for Lavor vacuum cleaners that retains dust and sits on the fitting thanks to the gasket supplied.
Combination rectangular brush D.35 Lavor Wash, item no. 3.754.0016: vacuum cleaner accessory with a 35 mm connection for cleaning floors and flat surfaces.
Complete nylon nozzle with a diameter of 40 mm for Lavor Wash vacuum cleaners, item no. 00080-03050, suitable for everyday use. Compatibility to be checked on your own model.
Conductive sleeve for the drum side of Domus-Taurus Lavor Wash vacuum cleaners, item no. 00014-02336. Specific spare part for the connection on the drum side, in the conductive version.
Conductive gasket Lavor Wash, item no. 3.099.0455: replacement gasket for components of Lavor Wash pressure washers. Compatibility to be checked on your own model.
Conductive sleeve D.40 for Domus-Taurus Lavor Wash, item no. 00014-02335. Spare part for connecting the suction system in the conductive version, with a 40 mm diameter.
Curved handle D.35 for Lavor Wash flexible hose, item no. 00026-01126: handle for vacuum cleaner flexible hose with a diameter of 35 mm. Connection to be checked on your own hose.
Curved chrome-plated steel tube Lavor Wash, diameter 38 mm and length 63 cm, item no. 3.753.0019: rigid replacement section for the suction tube of the vacuum cleaner.
Double filtration kit for Lavor Wash ash vacuum cleaners, item no. 10001-08211: additional cloth pre-filter to be placed alongside the main filter to protect the motor better.
Drum-side sleeve D.40 for Domus-Taurus vacuum cleaners Lavor Wash, item no. 00014-02334. 40 mm spare part for the connection point on the drum of the machine.
Lavor Wash accessory for vacuuming both dust and liquids with the same element, 280 mm long, item no. 00080-02019. Compatibility to be checked on your own model before ordering.
Lavor Wash washable cartridge filter, item no. 5.212.0155 (10001-08246), in pleated fabric. Spare part for Venti, Trenta, Vac, Rudy, Freddy and Kombo vacuum cleaners (the last two for dust only).
Lavor Wash replacement filter for Ashley 310, item no. 10001-08243: spare part for Ashley series ash vacuum cleaners. Compatibility to be checked on your own model.
Replacement filter bag for Domus Lavor Wash vacuum cleaners, item no. 00070-00679. It replaces the bag in use when it is full or damaged; other models to be checked.
Filter bag with ring for the Apollo Lavor Wash vacuum cleaner, item no. 00070-00668. Spare part complete with ring for the Apollo machine; other models to be checked.
Flat lance D.35 for Lavor Wash vacuum cleaners, item no. 00080-01912. Narrow mouth for slots and corners, with a 35 mm connection to be paired with your own hose.
Flat nozzle, 40 mm diameter, for Lavor Wash vacuum cleaners, item no. 00080-01931. Suited to cleaning crevices and tight spots; check that the connection fits your own vacuum cleaner.
Flex hose kit by Lavor Wash for Ashley and GNX vacuum cleaners, item no. 10001-09342. Spare part for getting the machine working again when the original hose is worn or damaged.
1 m metal flexible hose for Lavor Wash ash vacuum: replacement flexible accessory for cleaning chimneys and stoves. Item number and contents to be confirmed.
Lavor Wash brush body with clamps, 40 mm diameter and 300 mm length, item no. 00080-02015, for attaching interchangeable accessories. Compatibility to be checked on your own model.
Lavor Wash brush body with clamps, 40 mm diameter and 400 mm length, item no. 00080-01956, covering a wide strip on every pass. Compatibility to be checked on your own model.
GT HEPA filter Lavor Wash, item no. 10001-08249: high-efficiency replacement filter for Lavor Wash vacuum cleaners. Compatibility to be checked on your own model.
High-pressure hose by Lavor Wash with bayonet coupling, accessory for pressure washers. Length, maximum pressure and compatibility with your own model to be checked.
Lavor Wash high and low pressure lance with a 1.1 mm nozzle and M22 connection, item no. 00080-01751. A single lance for switching from the powerful jet to the low-pressure one.
