Milwaukee spade chisel for removing tiles, SDS-Plus shank, item 4932353424: 250 mm long, 40 mm wide blade and an angled head that avoids damaging the wall. In forged and hardened alloy steel.
Tools
There are 2848 products.
Milwaukee SDS-Plus wide chisel, item 4932367146: 40 mm blade and 250 mm length, for rotary hammers with an SDS-Plus drive. Suitable for removing tiles and for masonry work in renovations.
Set of 4 Milwaukee SHOCKWAVE Impact Duty square adaptors, item 4932480356: conversions 3/8"-1/4", 3/8"-1/2", 1/2"-3/8" and 1/2"-3/4", in chrome-molybdenum steel, for impact sockets on impact wrenches.
Milwaukee SG 27 PRO+ grinding disc for angle grinder, thickness 6 mm and bore 22.2 mm, in diameters 115, 125 and 230 mm: for mild steel and unalloyed steel, with good life and efficient material removal.
Milwaukee Shockwave 32-piece set with magnetic bits and holders in special steel with high torsional strength, item 4932464240.
Milwaukee Shockwave bit set with carabiner, 10 pieces, 1/4" drive, assorted PH2/PZ2/Torx. Item 4932480941.
Milwaukee Shockwave Impact Duty bit set with carabiner, 10 pieces, 1/4" drive, mixed assortment PH2/PZ2/TX20/TX25. Item 4932492939.
Milwaukee Shockwave 40-piece set for screwdriving and drilling, item 4932492004.
Milwaukee Shockwave Impact Duty set of 3 step drills, item no. 48899266: 4-12 mm in 1 mm steps, 4-20 mm and 4-30 mm, 1/4" hex shank with SHOCKZONE and TiAlN coating, for impact drivers.
Milwaukee SHOCKWAVE Impact Duty step drill, item no. 48899265: diameters from 4 to 30 mm, 1/4" hex shank with SHOCKZONE, TiAlN coating and RAPID STRIKE point. For impact drivers and drill drivers.
Milwaukee Slim series magnetic level, lengths 40, 60 and 100 cm: 2 solid acrylic vials, shock-proof and UV-resistant, accuracy 0.029° (0.5 mm/m) certified by an independent body, milled base, rare earth magnets, shock-absorbing end caps and V-groove for pipes.
Milwaukee 18 mm snap-off replacement blades, item no. 4932480107, pack of 10 in a sturdy dispenser: carbide blade with optimised cutting geometry, for 18 mm snap-off blade knives.
Milwaukee 25 mm snap-off replacement blades, item no. 4932480108, pack of 10 in a sturdy dispenser: carbide blade with optimised cutting geometry, for 25 mm snap-off blade knives.
Milwaukee 9 mm snap-off replacement blades, item no. 4932480106, pack of 10 in a sturdy dispenser: carbide blade with optimised cutting geometry, for 9 mm snap-off blade knives.
Milwaukee SR240 staff rod 240 cm, item 4932493202: metric scale up to 2.4 m with built-in slider for the laser receiver, aluminium frame, protective end caps and adjustable bubble level.
Milwaukee fencing staples item no. 4932480358 for the M18 FFUS cordless stapler: 40 mm long, 4 mm hot-dip galvanised steel wire, divergent points, pack of 960 pieces. For metal fencing fixed to wood.
Milwaukee step drill, item no. 48899320: nine holes from 4 to 20 mm in 2 mm steps, maximum thickness 4 mm, Rapid Strike point and 8 mm three-flat shank. For sheet metal, sections, tubes, stainless steel and plastic.
Milwaukee step drill, item no. 48899340, with 17 steps for holes from 6 to 40.5 mm, 10 mm shank and 90 mm length. It works on ferrous and non-ferrous metals, stainless steel and plastic up to 4 mm thick.
Milwaukee step drill, item no. 48899321 for PG7 to PG21 holes, from 12.5 to 28.3 mm: nine steps, 10 mm three-flat shank, length 68 mm, maximum thickness 4 mm. For cable glands in electrical panels and cabinets.
Milwaukee set of 3 step drills, item no. 48899399: 4-12 mm in 1 mm steps, 4-20 mm and 6-35 mm, three-flat shank, for clean, burr-free holes in sheet metal up to 4 mm thick.
Milwaukee STUD series tape measure, 5 m and 10 m lengths: 33 mm wide blade with full EXO 360 nylon coating resistant to tears and wear, tear-resistant protection on the first 15 cm, double-sided print, finger stop and impact-resistant case for the building site.
Milwaukee Shockwave Red Hex metal drill bits in HSS-G with titanium nitride coating and 1/4" hex shank for impact drivers. 135° tip with four cutting edges, diameters from 2 to 13 mm among the variants.
Milwaukee Shockwave Red Hex HSS-G TiN case, item 4932493865: 10 metal drill bits from 3 to 10 mm with 1/4" hex shank for impact drivers, QUAD EDGE 135° point and organizer case.
Milwaukee T 234 X jigsaw blades for wood, 91 x 2.5 mm, pack of 5 (item no. 4932430141): triple grinding for fast, clean cuts, plunge-cutting point, wood and chipboard from 3 to 60 mm.
Milwaukee J18-TH32 press jaw, item no. 4932430286, with 32 mm TH profile for M18 FORCE LOGIC press tools. It opens with one thumb for comfortable and practical pressing of fittings.
Milwaukee INKZALL™ ultra fine long-tip marker for deep holes and tight spaces, black, Item No. 4932501147. Quick-drying ink, writes for up to 72 hours without the cap.
Milwaukee snap-off knife with 9 mm segmented blade, item no. 48221960, with 13 segments, micro-carbide blade, AutoLock slider, overmoulded handle and pocket clip with blade snapper.
Milwaukee 18 mm snap-off blade knife, item no. 48221961: carbide blade for a precise, clean cut, metal blade lock with oversized slider and rubberised handle for a secure grip.
Set of 4 Milwaukee bevel edge woodworking chisels, item no. 4932479897, widths 6, 12, 19 and 25 mm: all-metal core, metal strike cap, size engraved on blade and handle, and protective blade guards.
Milwaukee lip and spur (brad point) wood drill bits to DIN 7487 E, diameters from 3 to 20 mm. Suitable for hardboard, plywood, chipboard and all natural woods, both hard and soft.
Milwaukee circular saw blade for wood, item 4932471300: diameter 190 mm, bore 30 mm, 24 tungsten carbide teeth, kerf 1.6 mm, PTFE coating and polyurethane-filled anti-vibration slots.
Bosch Gluey Glitter Mix hot glue sticks, item 2608002006: pack of 70 mini sticks, 7 mm in diameter and 20 mm long, for the Bosch Gluey glue pen, with a glitter effect for decorations and small bonding jobs on paper, cardboard, wood, plastic and stone.
Set of Bosch hot melt glue sticks in assorted colours (mixed) in a pack of 70 pieces, with low melting point for bonding and decorating with Gluey systems.
