Tools

The Dremel 531 cup brush is a rotary tool accessory designed for cleaning, deburring and surface finishing on metals that are difficult to work, in particular those resistant to corrosion. The cup profile and stainless steel bristles provide an effective abrasive action with a reduced tendency to leave rust residue or contamination.

Technical data:

• Type: cup steel brush for cleaning/polishing

• Model: 531

• Working diameter: 13 mm

• Shank diameter: 3.2 mm

• Bristle material: stainless steel

• Shape: cup brush

• Accessory length: approx. 51 mm

• Recommended maximum operating speed: 15 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Technical applications:

• Cleaning of corrosion-resistant metal surfaces such as stainless steel, aluminium and silver

• Removal of deposits, oxidation and contamination from metals, even in hard-to-reach areas

• Finishing and deburring of sheet metal, tubes or metal profiles

The Dremel 532 is a circular steel brush for rotary tools designed for cleaning, deburring and removal of rust or oxidation from metal surfaces and mechanical parts. The compact construction and steel bristles provide effective abrasive cleaning while maintaining good precision on fine detail.

Technical data:

• Type: circular steel brush for cleaning/deburring

• Model: 532

• Working diameter: approx. 9.5 mm

• Shank diameter: 3.2 mm (multi-tool standard)

• Bristle material: steel

• Shape: circular “brush-type” brush

• Overall accessory length: approx. 45 mm

• Recommended maximum operating speed: up to 15 000 – 20 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Typical applications:

• Removal of rust, flaking paint and scale from metal

• Cleaning of metal surfaces before finishing or protection

• Deburring of cuts, edges and joints

• Surface preparation for welding or coatings

The Dremel 535 is a stiff-wire steel brush for rotary tools, designed for removal of rust, oxidation, old paint and surface deposits from metals and hard surfaces. The circular construction with steel bristles provides aggressive and effective cleaning while maintaining control and precision in detail work.

Technical data:

• Type: circular steel brush for cleaning and deburring

• Model: 535

• Working diameter: approx. 9.5 mm

• Shank diameter: 3.2 mm (standard for rotary multi-tools)

• Bristle material: tempered steel

• Shape: circular “brush-type” brush

• Overall accessory length: approx. 48 mm

• Recommended maximum operating speed: up to 15 000 – 20 000 rpm

• Compatibility: rotary tools with 3.2 mm chuck

Typical applications:

• Removal of rust and oxidation from metal surfaces

• Cleaning of ferrous parts before painting or welding

• Deburring and finishing of metal joints

• Surface preparation of hard metal materials

• Rough polishing of surfaces after abrasive machining

The Dremel 540 is a set of universal cutting discs for rotary multi-tools, designed mainly for straight cutting of metal and also suitable for wood, plastic, light masonry and composite materials. The discs cut along the edge only and are to be fitted to the tool with the 402 screw mandrel.

Technical data:

• Type: cutting discs for rotary multi-tool

• Model: 540

• Quantity: set of 5 pieces

• Working diameter: 32.0 mm

• Disc thickness: 1.6 mm (typical)

• Shank diameter: 3.2 mm

• Max. cutting depth: 14.0 mm

• Maximum operating speed: ≤ 35 000 rpm

• Shape: thin disc

• Fixing: with 402 screw mandrel

Workable materials: metal (steel, stainless steel, aluminium, copper, brass), sheet metal, bolts/screws, plastic, thin wood, panels, plasterboard and light building materials.

Technical applications:

• Making straight cuts in metal and thin materials

• Cutting bolts, screws and sheet metal without the need for larger tools

• Sectioning plastic materials and light panels with control

The Dremel 542 is a carbide cutting and shaping disc for rotary tools, designed specifically for cutting, shaping and sanding wood and similar materials such as laminates and fibreboard. The carbide coating ensures longer life and wear resistance when working on hard or soft wood, and also allows grooves and profiles to be made with precision.

Technical data:

• Type: cutting/shaping disc for wood with carbide coating

• Model: Item 542

• Working diameter: 25.4 mm

• Shank diameter: 3.2 mm

• Max. cutting depth: 9.0 mm

• Maximum recommended speed: up to 35 000 rpm

• Workable materials: hard and soft wood, chipboard, plywood, laminates and wood fibreboard

• Compatibility: Dremel rotary tools with 3.2 mm shank

• Pack quantity: 1 disc

Technical applications:

• Cutting and sectioning of wood and wood panels

• Shaping and creating grooves in wooden materials

• Light sanding while cutting thanks to the abrasive carbide coating

The Dremel 7103 is a 2 mm diamond ball bit for rotary tools, designed for engraving, carving and precision detail work on particularly hard or tough materials. The coating of diamond particles gives greater surface hardness and better performance than traditional abrasive accessories, making it suitable for many finishing applications.

Technical data:

• Type: diamond ball bit for engraving/carving

• Model: 7103

• Working diameter: 2.0 mm

• Shank diameter: 3.2 mm

• Accessory length: 45.0 mm

• Material: steel with diamond coating

• Shape: spherical → allows concave engraving, grooves and detailed relief work

• Recommended maximum operating speed: up to approx. 25 000 rpm

• Quantity: set of 2 diamond bits

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm accessory chuck

Typical applications:

• Precision engraving and carving on glass, ceramic and porcelain

• Shaping and touching up on hardened metal and wood

• Detail work on hard and brittle materials

• Finishing and decorating work for hobbyists and professional projects

The Dremel 7120 is an oval disc diamond abrasive bit designed for Dremel-type rotary tools, specifically for engraving, shaping and removing material on hard or fragile surfaces. It is particularly suitable when precision work is needed on resistant materials such as glass, ceramic or hardened metal, where a traditional cutter would perform less well or wear out quickly.

Technical data:

• Accessory type: diamond bit / abrasive disc for finely detailed engraving and shaping

• Model: 7120

• Working diameter: approx. 6.7 mm

• Shank diameter: 2.4 mm (3/32″) standard Dremel

• Shape: oval diamond disc

• Material: steel with diamond coating

• Maximum recommended speed: up to 25 000 rpm (in some references up to 35 000 rpm)

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm accessory chuck

Technical applications:

• Engraving and shaping of hard surfaces such as glass, ceramic, porcelain

• Detail work on hardened metal and hard steels

• Precision work on thin materials or materials that are difficult to section

• Material removal with greater control than conventional abrasives

The Dremel 7134 is a flat-head diamond bit for rotary tools, designed for engraving, carving, precision cutting, finishing and touching up hard and compact materials. The accessory is coated with diamond particles that ensure a high material removal rate and a long service life, ideal for detail work on surfaces that are difficult to machine.

Technical data:

• Type: diamond bit for detailed engraving/cutting/carving

• Model: 7134

• Working diameter: 2.0 mm

• Shank diameter: 3.2 mm

• Total length: approx. 46 mm

• Bit shape: thin flat head for precise engraving

• Material: steel with diamond coating

• Maximum recommended speed: 25 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm accessory chuck

Technical applications:

• Detail engraving on glass, ceramic and stone

• Carving and touching up hardened metal and hard steel

• Cutting and finishing on wood, plastic and composite materials

• Precision work on small and intricate surfaces

The Dremel 8153 is a cylindrical aluminium oxide grinding stone designed for rotary tools with a 3.2 mm shank fitting, ideal for grinding, deburring and sharpening on a wide range of metallic materials and alloys. The shape and dimensions of the abrasive body also allow it to work effectively on tapered surfaces and irregular profiles.

Technical data:

• Type: grinding stone for general grinding and deburring on metal and ferrous materials.

• Model: 8153.

• Quantity: 1 piece.

• Abrasive material: aluminium oxide.

• Shape: cylindrical.

• Working diameter: 4.8 mm.

• Shank diameter: 3.2 mm.

• Accessory length: approx. 38 mm.

• Recommended maximum operating speed: up to 25 000 rpm.

• Compatibility: for use with Dremel rotary multi-tools and other compatible tools with a 3.2 mm chuck.

Technical applications:

• Sharpening of blades, drill bits and cutting tools.

• Deburring and smoothing of welded joints and castings.

• Removal of rivets, rust and excess material on metal.

• Preparation of metal surfaces before finishing.

The Dremel 8193 is an aluminium oxide grinding stone for rotary tools, designed for grinding, deburring and general sharpening operations on a wide range of metallic materials. The cylindrical shape allows it to work effectively on tapered and irregular surfaces, making it suitable for the needs of workshops, DIY and mechanical / detail work.

Technical data:

• Type: aluminium oxide grinding stone for grinding and deburring

• Model: 8193

• Working diameter: 15.9 mm

• Shank diameter: 3.2 mm (1/8 in)

• Shape: cylindrical

• Abrasive material: aluminium oxide

• Accessory length: approx. 38 mm

• Recommended maximum operating speed: up to 35 000 rpm (indicative)

• Compatibility: rotary tools with an accessory chuck of 3.2 mm

Technical applications:

• Grinding and deburring on metal and ferrous materials

• Sharpening of cutting tools such as blades, chisels and drill bits

• Smoothing of welded joints, removal of rivets and rust

• Preparation and finishing of tapered or irregular surfaces

The Dremel 8215 is an aluminium oxide grinding stone designed for grinding, deburring and sharpening on metals and other hard surfaces. The cylindrical shape and large diameter make this accessory suitable for general work, burr removal, smoothing welded joints and finishing on tapered or flat surfaces.

Technical data:

• Type: aluminium oxide grinding stone for general grinding, deburring and sharpening

• Model: 8215

• Working diameter: 25.4 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 40 mm

• Abrasive material: aluminium oxide

• Shape: cylindrical

• Recommended maximum operating speed: up to approx. 20 000 rpm (varies depending on the material)

• Compatibility: rotary tools fitted with a chuck for 3.2 mm accessories (Dremel series and compatible tools)

Technical applications: smoothing, deburring and sharpening of metals, removal of burrs from castings, smoothing welded joints, removal of rivets and rust.

The Dremel 84922JA is a set of silicon carbide abrasive points for rotary tools with a standard 3.2 mm shank. These small conical points are designed for grinding, deburring and engraving on hard or non-ferrous materials where traditional aluminium oxide points are less effective.

Technical data:

• Type: silicon carbide abrasive points for grinding and deburring

• Model: 84922JA

• Pack quantity: set of 3 pieces

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm

• Shape: small cone for access to surfaces and details

• Abrasive material: silicon carbide, more durable than aluminium oxide points

• Accessory length: approx. 40 mm

• Recommended maximum operating speed: up to 25 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a chuck for 3.2 mm accessories

Technical applications:

• Grinding and deburring of hard and brittle materials such as glass, ceramic, porcelain, stone and non-ferrous metals

• Engraving and material removal on uneven surfaces

• Preparation of complex surfaces before finishing

The Dremel 85422 is a silicon carbide abrasive wheel designed for grinding, deburring and sharpening hard or non-ferrous materials. Thanks to its more durable construction compared with aluminium oxide points, it is suitable for working materials such as glass, ceramic, stone and non-ferrous metals with precision and long working life.

Technical data:

• Type: silicon carbide grinding stone for grinding and deburring on hard surfaces

• Model: 85422

• Working diameter: 19.8 mm

• Shank diameter: 3.2 mm

• Total length: approx. 40 mm

• Shape: thin disc for tapered and flat applications

• Material: abrasive silicon carbide, harder than aluminium oxide stones

• Recommended operating speed: up to 35,000 rpm (varies depending on the material)

• Compatibility: Dremel rotary tools and multi-tools compatible with 3.2 mm accessories

Typical applications:

• Grinding and deburring of hard materials such as ceramic, glass and stone

• Removal of excess glaze or paint from ceramic surfaces

• Sharpening and shaping of non-ferrous surfaces

The Dremel 932 is an aluminium oxide grinding stone designed for grinding, deburring, weld deburring and material removal on metal surfaces, cast iron and other ferrous materials. It is compatible with rotary multi-tools fitted with a chuck that accepts 3.2 mm accessories.

Technical data:

• Type: aluminium oxide grinding stone

• Model: 932 (1 piece)

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm

• Material: aluminium oxide (durable abrasive)

• Shape: cylindrical / tapered for access to profiles and cavities

• Accessory length: approx. 40 mm

• Recommended maximum operating speed: up to 25,000 rpm

• Compatibility: rotary tools compatible with 3.2 mm accessories

Technical applications:

• Grinding of metal surfaces

• Deburring of welds and sharp edges

• Material removal in hard-to-reach areas

• Preparation of joints and surfaces for finishing

The Dremel Art. 953 is a set of 3 aluminium oxide grinding stones for rotary tools, designed for grinding, deburring and sharpening on metal and ferrous materials. The conical components allow work on conical and curved surfaces and joints, delivering effective finishes and controlled material removal.

Technical data:

• Model: 953

• Quantity: 3 grinding stones per pack

• Abrasive material: aluminium oxide

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm

• Accessory length: approx. 40 mm

• Shape: conical / versatile for curved surfaces

• Applications: smoothing, deburring and sharpening on metal, castings, welded joints, rivets and rust removal

• Maximum operating speed: up to 25,000 rpm

• Compatibility: rotary tools that accept accessories with a 3.2 mm shank

Typical use:

• Removal of burrs from cuts in metal

• Smoothing of welded joints and castings

• Sharpening of tools and metal edges

• Removal of rivets and rust on ferrous surfaces

The Dremel 26159924JA, also identified as accessory 9924, is a precision carbide engraving bit designed for use with the Dremel 290 engraver and other compatible rotary tools with standard shank bits. It is designed for decorative or technical engraving on a variety of surfaces, maintaining control and detail when producing lines and grooves.

Technical data:

• Type: engraving bit / carbide engraving bit

• Model: 9924 – 26159924JA

• Bit material: carbide (tungsten)

• Tool compatibility: Dremel 290 engraver and other rotary tools that accept engraving accessories

• Bit diameter: approx. 3 mm

• Overall length: approx. 22 mm

• Use: engraving of fine lines and grooves on various materials such as metal, glass, wood, plastic, ceramic and leather

• Quantity per pack: 3 engraving bits (code 9924 / 26159924JA)

Technical applications:

• Making decorative or functional engravings on hard or soft surfaces

• Creating precise grooves, outlines and details on mixed materials

Item 105 is a set of 3 engraving cutters, 0.8 mm with a ball head, designed for detail work with high-speed rotary tools. These accessories are ideal for carving, engraving, milling and material removal on a variety of substrates, ensuring precision even on curved surfaces or small details.

Technical data:

• Type: set of engraving cutters / engraving bits

• Model: 105 / 26150105JA

• Working diameter: 0.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Shape: ball

• Material: high-speed steel

• Maximum recommended speed: up to ~35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutters 0.8 mm

Technical applications:

• Engraving and material removal on wood, plastic, laminates and soft metals

• Cutting of grooves, profiles and precision details

• Suitable for detail work, decoration and shaping on flat or curved surfaces

Dremel 106 3 engraving cutters is a set of 3 engraving cutters, 1.6 mm with a ball head, designed for high-speed rotary tools. These accessories allow carving, engraving, shaping and material removal with precision on a variety of surfaces, making them ideal for detail work on materials such as wood, plastic, fibreglass and soft metals.

Technical data:

• Type: engraving cutters / engraving bits

• Model: 106 / 26150106JA

• Working diameter: 1.6 mm

• Shank diameter: 3.2 mm (1/8″)

• Shape: ball

• Accessory length: ~39 mm

• Material: high-speed steel

• Maximum recommended speed: up to ~35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutters, 1.6 mm

Technical applications:

• Engraving, shaping and material removal on wood, plastic, laminates and soft metals

• Creation of grooves, profiles and precision details on flat or curved surfaces

• Suitable for detail work in craft, decorative or technical projects

Dremel 108 engraving cutter is an engraving cutter/engraving bit with a cylindrical shape, 0.8 mm, designed for detail work with high-speed rotary tools. This tool allows you to carve, engrave, mill and create grooves with precision on materials such as wood, plastic, leather, rubber and soft metals, and is also suitable for curved or complex surfaces.

Technical data:

• Type: engraving cutter / engraving bit

• Model: 108 / 26150108JA

• Working diameter: 0.8 mm (approx. 1/32 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Material: high-speed steel / hardened steel for general use

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutters 0.8 mm

Technical applications:

• Engraving, shaping and material removal on wood, plastic, laminates, fibreglass and soft metals

• Creation of grooves, profiles, tapered holes and details on flat or curved surfaces

• Ideal for precision work, decoration and artistic carving on soft materials

Dremel Pack of 3 engraving cutters – item 110 is an engraving cutter/cutting engraving bit with a cylindrical head of approx. 1.9 mm, designed for detail work with high-speed rotary tools. It is suitable for shaping, engraving, grooving and material removal on various materials, offering precision even on curved surfaces.

Technical data:

• Type: engraving cutter / engraving bit

• Model: 110 / 26150110JA

• Working diameter: ~1.9 mm (5/64 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~45 mm

• Material: high-speed steel

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Pack quantity:

• 1 engraving cutter

Technical applications:

• Engraving and material removal on wood, plastic, laminates, soft metals and similar materials

• Creation of grooves, profiles, hollowing and precision details

• Can also be used on curved or hard-to-reach surfaces

Item 111 is a small-diameter (0.8 mm) engraving cutter with an elongated cylindrical head, designed for extremely precise detail work with high-speed rotary tools. It allows engraving, shaping and material removal even on curved surfaces, making it suitable for carving and micro-machining operations on various materials such as wood, plastic, fibreglass, rubber and soft metals.

Technical data:

• Type: engraving cutter / cylindrical carving bit

• Model: 111 / 26150111JA

• Working diameter: 0.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 45 mm

• Material: high-speed steel

• Maximum recommended operating speed: up to approx. 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

Pack quantity:

• 3 × engraving cutter 111

Technical applications:

• Engraving, shaping and milling of details on wood, plastic, laminated materials and rubber

• Precision work, grooves, profiles and localised material removal

• Ideal on curved or irregular surfaces thanks to the elongated shape of the cutter

The item 113 is a cylindrical engraving cutter of 1.6 mm designed for detail work on a wide range of materials. It is specifically made for engraving, shaping and material removal with high-speed rotary tools, offering precision even on curved and complex surfaces.

Technical data:

• Type: engraving / carving cutter

• Model: 113 / 26150113JA

• Working diameter: 1.6 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~45 mm

• Material: high-speed steel

• Recommended maximum operating speed: up to 35 000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm chuck

Quantity in pack:

• 1 × engraving cutter 113 (some packs may include several bits depending on variant)

Technical applications:

• Engraving and detail work on wood, plastic, laminates and similar materials

• Shaping, milling of small surfaces and creation of fine grooves

• Also suitable for work on soft metal, leather, rubber and plexiglass

The item 115 is a cylindrical high-speed cutter of approximately 7.8 mm, designed for carving, engraving and removing material on a variety of surfaces. It is designed to achieve precision machining in operations such as shaping, engraving, grooving and tapered drilling with high-speed rotary tools.

Technical data:

• Type: high-speed cylindrical carving/engraving cutter

• Model: 115 / 26150115JA

• Working diameter: approx. 7.9 mm (5/16 in)

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: approx. 38 mm

• Material: high-speed steel

• Compatibility: Dremel rotary tools and other multi-tools with a 3.2 mm chuck

• Recommended speed: up to approx. 30 000 rpm, varying according to the material being worked (wood, plastic, soft metal)

Quantity in the pack:

• 2 × carving/engraving bits (cylindrical shape) included in the standard 115 pack.

Technical applications:

• Shaping and removal of material on wood, plastic and soft metals

• Engraving, grooving and creation of profiles on flat or curved surfaces

• Creation of tapered holes and precision details in material machining projects

The item 1453 is a complete sharpening kit for saws and chains, designed to keep blades and chains efficient and performing at their best. Ideal for precise and safe cutting, it extends chain life and ensures smooth, controlled cutting operations.

Technical data:

• Type: sharpening kit for saws and chains

• Model: 1453 / 261501453JA

• Compatibility: chainsaw chains of various brands

• Kit contents: round file, sharpening guide, positioning supports

• Material: hardened steel for files, tough plastic for supports

• Recommended use: regular chain maintenance for precise and safe cuts

Quantity in the pack:

• 1 × complete sharpening kit

Technical applications:

• Sharpening and maintenance of chainsaw chains

• Restoring the edge for clean, even cuts

• Preventive maintenance operations to extend chain life

The item 192 is a 4.8 mm high-speed tapered cutter (carving/engraving bit) for rotary tools, designed for shaping, engraving and removing material in precision work on wood, plastic and similar materials. Ideal for creating grooves, profiles, hollows and small tapered holes on flat or curved surfaces.

Technical data:

• Type: high-speed tapered carving/engraving cutter

• Model: 192 / 26150192JA

• Working diameter: 4.8 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 2 × item 192

Technical applications:

• Shaping and engraving of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small tapered holes

• Detail work and decoration on soft materials

The item 193 is a 2.4 mm high-speed ball cutter (carving/engraving bit) for rotary tools, designed for engraving, shaping and removing material in detail work on wood, plastic and similar materials. Ideal for precision operations, creating grooves and profiles, or making hollows and small holes on curved or flat surfaces.

Technical data:

• Type: high-speed ball carving/engraving cutter

• Model: 193 / 26150193JA

• Working diameter: 2.4 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 1 × item 193

Technical applications:

• Engraving, shaping and modelling of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and small holes on flat or curved surfaces

• Decoration and detail work on soft materials

The 196 is a 3.2 mm high-speed ball cutter (carving/engraving bit) for rotary tools, designed for engraving, shaping and removing material in detail operations on wood, plastic and similar materials. Ideal for precision work, creating grooves and profiles, or making holes and hollows in curved or flat surfaces.

Technical data:

• Type: high-speed ball carving/engraving cutter

• Model: 194 / 26150194JA

• Working diameter: 3.2 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

Quantity in the pack:

• 1 × Dremel cutter 194

Technical applications:

• Engraving, shaping and modelling of wood, plastic, laminates and similar materials

• Creation of grooves, profiles, hollows and holes on flat or curved surfaces

• Decoration and detail work on soft materials

The Dremel 196 is a high-speed cylinder cutter (carving/engraving bit) of 6.4 mm for rotary tools, designed for carving, shaping, grooving and material removal in detail work on wood, plastic and similar materials. It is ideal for shaping, creating profiles and precise engraving, offering optimum control in precision work.

Technical data:

• Type: high-speed cylinder cutter for carving/engraving

• Model: 196 / 26150196JA

• Working diameter: 6.4 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~38 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Pack quantity:

• 1 × Dremel 196 cutter

Technical applications:

• Shaping and carving of wood, plastic, laminates and similar materials

• Creating grooves, profiles, hollows and holes on flat or curved surfaces

• Engraving and decoration of soft materials

The Dremel 199 is a high-speed cutter (carving/engraving bit) of 9.5 mm for rotary tools, designed for carving, engraving, grooving and material removal in detail work on various materials. It is a versatile accessory for shaping, creating profiles and grooves or making tapered holes, ideal for precision work.

Technical data:

• Type: high-speed cutter for carving/engraving

• Model: 199 / 26150199JA

• Working diameter: 9.5 mm

• Shank diameter: 3.2 mm (1/8″)

• Accessory length: ~39 mm

• Material: high-speed steel (High Speed Steel)

• Recommended maximum operating speed: up to ~30 000 – 35 000 rpm

• Compatibility: Dremel rotary tools and multi-tools with 3.2 mm chuck

Pack quantity:

• 1 × Dremel 199 cutter

Technical applications:

• Shaping and carving of wood, plastic, laminates and similar materials

• Creating grooves, profiles, hollows and tapered holes on flat or curved surfaces

• Engraving and decoration on soft materials

The Dremel 401 is a mandrel (screw pin) for rotary tools, designed for mounting and securing polishing and cleaning accessories on Dremel multi-tools. It is particularly suitable for use with felt wheels and other accessories intended for finishing.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: 401

• Shank diameter: 3.2 mm (≈ 1⁄8″) standard for rotary tools

• Total length: approx. 39 mm

• Material: wear-resistant metal

• Shape: screw pin with threaded head for mounting accessories

• Maximum operating speed: up to 35 000 rpm

• Pack quantity: 3 pieces

• Compatibility: Dremel-type rotary tools and multi-tools with 3.2 mm chuck

Main features:

• Ergonomic mounting: threaded head that allows accessories such as felt wheels and polishing bits to be screwed on directly.

• Ease of use: robust and intuitive design for a quick accessory change.

• Versatility: used mainly with accessories intended for polishing and finishing.

Technical applications:

• Securing felt polishing wheels (e.g. models 414, 422, 429) for bright finishes on metals and plastics.

• Mounting polishing bits for surface finishing and precision in detail work.

The Dremel 402 is a mandrel (screw pin) for rotary tools, designed for mounting cutting discs, polishing discs and other centre-hole accessories on Dremel multi-tools. It is one of the basic accessories required to use various discs and finishing wheels correctly with the tool.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: 402

• Shank diameter: 3.2 mm (1/8″) – standard for Dremel rotary tools

• Material: hard-wearing metal

• Shape: pin with slotted screw head for tightening with a flat-blade key

• Maximum operating speed: up to 35 000 rpm

• Quantity: 4 pieces

• Compatibility: rotary multi-tools Dremel and other compatible with 3.2 mm chuck

Main features:

• Accessory fixing: allows you to mount cutting discs, polishing discs and other centre-hole accessories, holding them firmly in place during rotation.

• Slotted screw head: designed to be tightened or loosened with a flat-blade key or the key supplied with many Dremel kits, making accessory changes easier.

• Versatile use: compatible with a wide range of cutting and polishing accessories, including various Dremel cutting discs.

Technical applications:

• Mounting of abrasive cutting discs for operations on metal, wood and composite materials.

• Fixing of polishing discs or finishing wheels for removing micro-scratches or polishing.

• Use as a basic component for operations requiring centre-hole accessories on rotary multi-tools.

The Dremel 402JA is a mounting mandrel (screw pin) for rotary tools, designed for fixing cutting discs, polishing discs and other centre-hole accessories to Dremel multi-tools. It is one of the essential accessories for using various abrasive and finishing tools correctly with your multi-tool.

Technical data:

• Type: mandrel / accessory mounting pin

• Model: Item 402JA

• Contents: normally 4 pieces in the pack

• Shank diameter: 3.2 mm (1/8″) – standard for Dremel tools

• Material: sturdy metal

• Shape: screw pin with slotted head

• Compatibility: all Dremel rotary multi-tools with 3.2 mm chuck

• Maximum operating speed: up to 35 000 rpm

• Use of the pin: for fixing cutting discs, polishing discs, brushes and other accessories with a centre hole

Main features:

• Allows secure mounting of abrasive and polishing discs on the Dremel tool.

• Slotted screw head for tightening/ loosening with a flat-blade screwdriver.

• Multi-pack, useful for having spares or quick replacements.

Technical applications:

• Fixing of abrasive cutting discs for metalworking.

• Mounting of polishing discs on felt or other backings.

• Assembly of various centre-hole accessories for a range of cutting and finishing applications.

The Dremel Item 405 is a nylon bristle brush for rotary tools, designed for cleaning, light deburring and polishing of surfaces. It is suitable for work on delicate or hard-to-reach materials, and can also be used with polishing paste to improve the surface finish of metal, plastic or other materials.

Technical data:

• Type: cleaning and polishing brush

• Model: Item 405

• Working diameter: 3.2 mm

• Shank diameter: 3.2 mm

• Bristle material: nylon

• Shape: compact paintbrush-style brush

• Accessory length: approx. 47 mm

• Recommended maximum operating speed: 15,000 rpm

• Compatibility: Dremel rotary tools and other multi-tools with 3.2 mm chuck

Technical applications:

• Cleaning of flat surfaces or grooves in plastic, steel and precious metals

• Light deburring and removal of surface deposits

• Fine polishing of cutlery, jewellery and metal surfaces (can be used with polishing compounds)

• Surface preparation before further finishing

The Dremel Art. 420 is a heavy duty abrasive cutting disc for rotary tools, designed for straight cuts in metal and other materials with greater strength and durability than standard cutting discs. It is suitable both for heavy-duty applications on ferrous materials and for work on wood, plastic and light building materials.

Technical data:

• Type: heavy duty abrasive cutting disc

• Model: Art. 420

• Working diameter: 24.0 mm (≈ 0,94")

• Disc thickness: ≈ 1.0 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Abrasive material: reinforced aluminium oxide

• Shape: disc with cutting along the edge

• Maximum operating speed: up to 35 000 rpm

• Mounting: with 402 screw mandrel

• Quantity: typically 1 piece

Technical applications:

• Straight cutting of ferrous and non-ferrous metals, including bars, sheet and tubes.

• Sectioning of bolts, screws and profiles.

• Cutting of thin wood, plastic, panels and composite materials.

The Dremel 422 is a felt polishing bit for rotary tools, designed for the polishing and surface finishing of metals, plastics and other materials. Its compact profile and felt construction also make it suitable for cleaning details, holes or hard-to-reach surfaces, and it can be used with or without polishing compound to obtain a smooth, shiny surface.

Technical data:

• Type: felt polishing bit/cylinder for rotary tools

• Model: Art. 422

• Working diameter: 10 mm

• Shank diameter: 3.2 mm (standard mandrel)

• Material: abrasive polishing felt

• Shape: polishing cone/cylinder

• Recommended maximum operating speed: up to 20 000 rpm

• Compatibility: Dremel type rotary tools with a 3.2 mm chuck (use with a suitable pin/clamp)

Technical applications:

• Polishing of ferrous and non-ferrous metals (steel, brass, aluminium, silver, etc.)

• Finishing and polishing of plastics and perspex after abrasive operations

• Cleaning of details, corners and holes thanks to the conical shape

• Use with or without polishing compound/paste to obtain different finishes

The Dremel Art. 425 is a pressed felt polishing disc designed for rotary tools, ideal for achieving glossy, refined finishes on metals and plastic materials. It is intended for use with polishing compound and other polishing discs to obtain a brilliant result on machined surfaces.

Technical data:

• Type: felt polishing disc for rotary tools

• Model: Art. 425

• Working diameter: 22.5 mm (≈ 2.25 cm)

• Shank diameter: 3.2 mm (standard mandrel)

• Material: abrasive polishing felt

• Shape: circular disc

• Compatibility: Dremel rotary tools and multi-tools with a 3.2 mm chuck

• Recommended maximum operating speed: up to approx. 20 000 rpm

• Mounting: by means of a mandrel/clamp suitable for polishing wheels

Technical applications:

• Polishing of metal surfaces such as steel, brass, copper, aluminium and stainless steel for a brilliant effect.

• Surface finishing of hard plastics after grinding and sanding.

• Use with polishing compound to obtain a higher level of shine on machined surfaces.

The Dremel 426 is a fibreglass-reinforced abrasive cutting disc for rotary tools, designed for straight cuts and slots in metal and a variety of other materials. It offers greater strength and durability than basic discs, making it suitable also for harder metals and heavy-duty use compared with standard discs.