Kit of 3 universal adapters Lavor Wash, item no. 6.010.0005, for connecting accessories with different connections to your own pressure washer: compatibility to be checked on your own model.
Pressure Washers & Accessories
There are 213 products.
Kit of 5 nozzles with a 1.3 mm bore Lavor Wash, item no. 5.012.0401: spare part for replacing worn nozzles, compatibility to be checked on your own pressure washer model.
Lavor Wash lance extension: lengthens the pressure washer lance to reach high or difficult points. Compatibility with your own lance to be checked against your own model.
Lavor Wash 700 mm lance complete with PL4/1 head and M22 connection, item no. 00080-01715. Medium-length lance for everyday use with a pressure washer.
LWS M1/4 gas adapter Lavor Wash, item no. 5.009.0421: fitting for connecting accessories with an LWS connection and a 1/4 gas thread; check your own model.
Lavor Wash Maine 1409 XP cold water pressure washer, item no. 8.673.0001C: 2800 W single-phase motor, 540 l/h, axial pump with three steel pistons, 8 metre hose; it weighs 23 kg.
Lavor Predator 180 Digit cold water pressure washer, item no. 36051-00028: 180 bar maximum, 510 l/h, 2500 W universal motor, digital control system and a weight of 15.8 kg.
Lavor Wash pressure washer lance, 120 cm long and supplied without gun, item no. 40.6205.00. The rod only, to replace a damaged lance or for a customised assembly.
Lavor Wash pressure washer lance, 50 cm long, without nozzle, item no. 40.0535.00. Short, handy rod, to be completed with the nozzle best suited to the job at hand.
Rotary turbo lance for Lavor Wash pressure washer with M22 connection, item no. 00080-02968. Replacement for anyone dealing with stubborn dirt: compatibility with your own model to be checked.
Pressure washer gun RL 140 by Lavor Wash, item no. 30.0920.00. Replacement control handle: pressure and connections to be checked against your own model.
Gun RL 300 by Lavor Wash for pressure washer, 3/8" male inlet and M22 outlet, item no. 00080-01694. For professional use: compatibility to be checked against your own model.
Gun RL37 by Lavor Wash for pressure washer, 3/8" male inlet, version with S7 and M22x1.5 outlet, item no. 30128000. Compatibility to be checked against your own model.
Lavor Wash rotary pressure washer brush with swivel, item no. 6.603.0004, with M22 screw connection. The swivelling head makes it possible to reach corners and sloping surfaces when washing with the pressure washer.
Lavor Wash Rotox S01 lance with conical head, length 470 mm, item no. 00080-02775. Rotating jet designed for stubborn dirt on floors, walls and hard surfaces.
Lavor Wash S'09 gun with 3/8 and M22 connections for pressure washer: two threads for connecting hoses and accessories of different types. Compatibility to be checked against your own model.
Lavor Wash lance model S99 with a fixed 1.15 mm nozzle, item no. 10001-09270. Non-adjustable jet, for consistent performance at every wash; connection to be checked on your own model.
Lavor Wash lance model S99 with a 1.15 mm nozzle, A/B version, item no. 10001-09271. Spare part for pressure washers; connection and pairing to be checked on your own model.
Lavor Wash sandblasting lance with M22x1.5 connection type 1, item no. 41.1140.12. For using the pressure washer in sandblasting jobs; compatibility to be checked on your own model.
Pressure washer gun SG 35 by Lavor Wash with 3/8" swivel inlet, item no. 231010020417. The hose does not twist while working; compatibility to be checked against your own model.
Lavor Wash Thermic 2W Lite 6L petrol-engine pressure washer, item no. 36001-00053: Loncin G200F 6.5 HP petrol engine, 220 bar maximum pressure, 600 l/h maximum flow, cold water. Independent of the mains.
Rotary turbo lance by Lavor Wash, 500 mm long, with M22 connection and flow factor 045, item no. 00080-02966. For professional pressure washers: compatibility to be checked against your own model.
Lavor Wash Vertigo 28 Pro cold water pressure washer, item no. 8.047.0068C: 2800 W induction motor, 180 bar maximum pressure and 510 l/h maximum flow. Professional 10 m hose on a pressurised reel.
Low-profile knob for pressure adjustment, Lavor Wash spare part item no. 4.606.0206. Low-profile version for turning the adjustment by hand. Compatibility to be checked against your own model.
LS 12 foam lance with external suction, item no. 25.1823.21, Lavor Wash. It draws the detergent from a separate container to spread the foam before rinsing.
Kit 125 LW of brass seal support rings with spacer for PT pump Ø 12 Lavor Wash, item no. 6.005.0134: to renew the seal system, pump model to be verified.
Kit 165 LW valve model '02, setting 125H110, for Parana' pump Lavor Wash, item no. 6.005.0179: a code specific to this setting, match with the model to be verified.
Kit 173 LW with 3 pistons Ø 12 with DLC treatment and springs for Partner pump Lavor Wash, item no. 6.005.0216: pistons and springs in a single item, model to be verified.
Kit 237 LW with 3 pistons Ø 12 with DLC treatment and springs for PT03 pump Lavor Wash, item no. 6.005.0254: three pistons in a single item, match to be verified.
Kit 303 LW second-seal bushings complete with O-Rings for TPBH head model '10 Lavor Wash, item no. 6.005.0331: parts already supplied with seals, head to be checked.
Kit 5 LW of oil seal rings for brass heads '97, '99, Best and Omnia Lavor Wash, item no. 6.005.0006: five rings in a single kit, head version to be verified.
Kit 75 of O-Ring gaskets, LW series Lavor Wash, item no. 6.005.0075, for the MTP Partner pump. A spare part to restore the pressure washer seals during pump overhaul; compatibility to be verified on your own model.
Kit 79 of oil seal rings, LW series Lavor Wash, item no. 6.005.0079, for Partner pump diameter 12 mm, fibre version. A spare part for pump unit maintenance; match to be verified on your own model.
Kit of valves complete with O-Ring, LW series, for TPBH head model '10, item no. 6.005.0330, Lavor Wash. A spare part to bring the pump head back to correct operation; compatibility to be verified on your own model.
Maintenance kit for MW tank, item no. 6.505.0041, Lavor Wash. Spare part for the periodic maintenance of the tank; contents and pairing with your own machine to be checked on your own model.
Lavor Wash microswitch control rod for the new compensating valve, item no. 4.008.0782: a small mechanical spare part that operates the microswitch. Compatibility to be verified on your own model.
Lavor Wash micro switch assembly with cable for the Total Stop mechanism, USA/EU version, item no. 5.009.0516: a single spare part to replace only the electrical part.
Engine gasket 120x149 mm, type SPE SS, 5 mm thick, item no. 3.299.0015: a Lavor Wash spare part to seal the joint between parts. Compatibility to be verified on your own model.
Type A nipple by Lavor Wash from M22 connection to G1/4 female, item no. 26.0002.31. Adapter for connecting lances and accessories; compatibility to be checked against your own model.
O-Ring gasket 117x2.5 mm, item no. 3.200.0015: a large-diameter Lavor Wash sealing ring with a 2.5 mm section, for large bodies, covers and flanges. Compatibility to be verified on your own model.
