MILWAUKEE M18 FFUS-302 STAPLE GUN + 2 BATTERIES 3AH

M18 BLPP4-503 Milwaukee kit

M18 BLH-0 ROTARY HAMMER

The powerful 18 V Milwaukee motor delivers performance comparable to that of a corded tool

REDLINK PLUS electronics protect the motor and battery against overload and improve tool performance

Powerful hammering mechanism delivers up to 2.5 J of power and a vibration level of 8.9 m/s

Compact and ergonomic for greater comfort

Fixtec release for quick change

Metal gearbox for longer life

4 modes: rotation, chiselling, rotary hammer action and neutral position for chisel orientation

Battery charge level indicator

Drilling diameter in concrete 26 mm

Drilling capacity in wood/metal 30 / 13 mm

Impact rate blows/min 0-4-900

Vibration when drilling 8.9 m/s

Vibration when chiselling 9.5 m/s

No-load speed 0 - 1,200 rpm

Tool fitting SDS-plus/ Fixtec

Works with 1,5-2-3-4 and 5 8 Ah Li-Ion Ah batteries

Weight 2.8 kg without batteries

Compatible with the M18 CDE dust extraction unit

M18 BLSAG125XPD - 125mm angle grinder

Thanks to its 11,000 rpm it is optimised for cutting

The safety clutch prevents kickback, avoiding injury to the operator

The FIXTEC™ system allows the disc to be changed without tools

Thanks to its 11,000 rpm it is optimised for cutting

The powerful brushless motor delivers the same performance as an 800W grinder

The most compact and lightest grinder in the Milwaukee range

The safety clutch prevents kickback, avoiding injury to the operator

The FIXTEC™ system allows the disc to be changed without tools

The paddle switch cannot be locked on and there is a function to prevent accidental starting

No tools are required to remove the 125 mm guard

The dust shield protects the motor and extends the life of the grinder

Slim handle

M18 BLIDRC - 1/4" single-speed impact driver

At only 112 mm long, it can reach even the tightest spaces

The powerful brushless motor delivers 190 Nm of torque at 3600 rpm and 4900 blows per minute

3 user-selectable DRIVE CONTROL modes for different speeds and torques

The bit can be inserted with one hand, making the work quicker and more practical

The gears and the housing that contains them are entirely metal, ensuring performance and durability over time

Battery charge level indicator and LED light to illuminate the work area

Fitted with a reversible metal belt hook

The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

Works with all M18™ MILWAUKEE® batteries

M18 BLPDRC COMPACT DRILL DRIVER

This hammer drill measures only 145 mm

The 13 mm metal chuck ensures an exceptional grip on drill bits or bits

The best torque-to-size ratio, a full 60 Nm

Fitted with a reversible metal belt hook

Battery charge level indicator and LED light to illuminate the work area

The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

Works with all M18™ MILWAUKEE® batteries

Speed optimised for faster drilling and fastening (0 - 550/ 0 - 1700 rpm)

Supplied with: M18 BLH-0 rotary hammer, M18BLPDRC compact drill driver, M18 BLSAG125XPD-0 grinder, M18 BLIRC compact impact driver, Milwaukee Packout trolley, 3 x 5 Ah batteries and rapid charger

Milwaukee M18 BLPP2A3-502X KIT is a kit consisting of the M18 BLPD2 hammer drill and the M18 BLIDR ¼″Hex impact driver

The Milwaukee M18 BLPD2 hammer drill with brushless motor, which delivers up to 40% more maximum torque than the previous model, has a power of up to 82 Nm. The design is compact, with an overall length of 180 mm, and a 13 mm chuck for better bit holder retention and improved grip. The speed is optimised for drilling and screwdriving applications (0-550 / 0-1800 rpm).

The REDLINK PLUS electronics provide greater overload protection for tool and battery, ensuring longer life in demanding applications. The REDLITHIUM battery ensures advanced battery pack construction and consistent performance, to offer longer runtime and maximise battery life, with a battery charge status indicator and LED light to illuminate the work area.

Milwaukee M18 BLPD2 includes a belt hook. Compatible with all M18™ MILWAUKEE batteries

Item code 4933464516

The Milwaukee M18 BLIDR impact driver, fitted with a brushless motor, delivers a tightening torque of 190 Nm with 3600 rpm and 4900 blows per minute and 3 adjustable speeds.  The compact design and overall length of only 112 mm allow use in the tightest spaces, with a 1/4″ hex drive. The Milwaukee M18 BLIDR impact driver features 3 DRIVE CONTROL modes that allow the user to select different speeds and torques.

The REDLITHIUM battery ensures advanced battery pack construction and consistent performance, to offer longer runtime and maximise battery life, with a battery charge status indicator, and the LED located on the front provides excellent illumination of the work area. The REDLINK PLUS electronics protect the tool and battery against overload, ensuring longer life. The bit can be inserted with one hand only, making the work faster and more practical.

Milwaukee M18 BLIDR includes a belt hook. Compatible with all M18™ MILWAUKEE batteries

Item code 4933492842

The Milwaukee M18 BLPP2A3-502X kit includes 2 x M18 B5 batteries (18V 5.0 Ah), M12-18 FC charger, 1 HeavyDuty case.

Product code 4933492844

Milwaukee M18 BLPDRC-0 brushless 18V hammer drill driver, 60 Nm, body only, without batteries. Only 145 mm long.

Milwaukee M18 BLPDRC-202C compact hammer drill, brushless, 145 mm, torque 60.5 Nm, 13 mm metal chuck. Kit with 2 x 2.0 Ah batteries, charger and case. Art. 4933492822.

Milwaukee 18 V percussion drill and angle grinder kit

The kit includes:

1 FUEL M18 FPD3 percussion drill

1 M18 FSAG125X-0 125 mm angle grinder

2 M18 5.0 Ah batteries item 4932430483

1 Fast charger for M12 - M14 - M18 batteries item 4932451079

1 Milwaukee Heavyduty case

FUEL M18 FPD3 percussion drill

Fitted with POWERSTATE Brushless motor, FUEL technology and REDLINK electronics

Very versatile thanks to its length of only 175 mm

AUTOSTOP function that protects the operator

Autostop activation is signalled by an indicator on the underside

13 mm metal chuck

With display showing the remaining charge

Useful for drilling in:

- Wood up to 89 mm

- Metal and masonry up to 16 mm

Max torque: 158 Nm

Equipped with belt clip and auxiliary handle

Percussion frequency: 0 - 33000 blows per minute

Speed modes: 2 (speed 1: 0-500 blows per minute and speed 2: 0-2100 blows per minute)

Weight: 2.2 kg

125 mm M18 angle grinder item 4933478701

Fitted with BRUSHLESS motor, FUEL technology and REDLINK electronics

Delivers performance equal to 1,200 W

Reduced head size and optimised battery housing

AVS anti-vibration side handle

Disc diameter: 125 mm

FIXTEC system for tool-free disc replacement

For cuts with a depth of up to 33 mm

Spindle thread: M14

Without brake

With Softstart function

Switch type: slide with lock

No-load speed: 8500 rpm

Ergonomic handle

Removable dust grilles, to protect the motor from abrasive dust

Quick-release guard: maximum cutting capacity and quick adjustment

Protection against accidental restarting

Works with all Milwaukee M18 batteries (18 V)

M18 FIW2F12-0:

Tri-LED lighting

Extremely compact: total length 124 mm

Max bolt diameter M18

Delivers up to 339 Nm with maximum efficiency

Extremely compact: total length 124 mm, for applications in confined spaces

System with 4 DRIVE CONTROL modes that lets you choose between four different speed and torque settings, for maximum flexibility

Bolt Removal mode for greater control when loosening: speed decreases once the bolt is loosened to prevent it from falling

Auto Shut-Off mode to prevent over-torque tightening: max 34 Nm of torque applied for optimised applications

Tri-LED lighting to illuminate the work area

½˝ square friction ring

All-metal belt hook. Dimensions: 12x21x6 cm

FUEL™ technology redefines cordless power tools. The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver high performance

Works with all M18™ MILWAUKEE® batteries

Fitted with a battery charge level indicator and light

No-load speed (rpm) 1700/2000/2500/2000

Max torque (Nm) 102/203/339/34

Voltage (V) 18

Battery type Li-ion

Impact rate (blows/min) 900/1650/2400/0-1200

Max tightening torque (Nm) 339

Supplied with: M18 FIWF2-12 body only

Milwaukee M18 FPP4E-555T - Hammer drill - Rotary hammer - ONE KEY angle grinder - 1/4" impact driver

M18 FPD3 - 18V hammer drill, brushless motor, FUEL technology, 2 speeds, 158 nM of torque and 33,000 rpm

M18 FHX - 18V rotary hammer, brushless motor, FUEL technology, 2,5J, 26 mm hole, anti-vibration, 4.5 Kg

M18 ONEFSAG125XB - Angle grinder with slide switch, brushless motor, FUEL technology, motor brake, disc diameter 125, max cutting depth 33 mm, ONE-KEY system for inventory and tracking, 2.7 kg

M18 FID3 - 18V impact driver, High Output, 1/4" hex drive, 226 nm, 4 speeds

Supplied with: 3 x 18V High Output batteries (2 x 5.5 Ah + 1 x 3Ah), 1 rapid charger, Packout trolley

 M18 B5:

LED battery charge status indicator

Fitted with protection to prevent dust and water from entering the battery

Protective barrier to divert any water ingress away from the electronics and out of the battery

REDLINK intelligent electronics protect the battery pack in demanding conditions, maximising cell performance

Fitted with an electronics coating to protect the battery from water and condensation

Redlithium-ion lithium-ion cells deliver up to 2,5 times more runtime, up to 20% more power and double the battery life

Up to 25% more runtime than the 4 amp battery. 45% compared with the 3 amp battery. Two-year warranty. Compatible with the entire 18 range. Can replace the 1,5-2-3 and 4 amp batteries. Same charger. 

Milwaukee M18 power pack with 2 x REDLITHIUM™ 5.0 Ah batteries and charger, art. 4933459217.

Milwaukee M18 BLCPP2A-402C kit consisting of M18 BLPDRC compact brushless hammer drill (60 Nm, 145 mm long) and M18 BLIDRC compact brushless impact driver (190 Nm, 112 mm long), supplied with 2 x REDLITHIUM 18V 4Ah batteries, charger and case. Ideal for professional use in confined spaces.

Milwaukee M18 FPD3 FUEL 18V brushless hammer drill, kit with 2 batteries, charger and case.

The Milwaukee M18 BLCS66-0X cordless circular saw for wood is a machine designed specifically for cutting wood and wood-based materials of any shape and size, with millimetre precision, for professional use. The compact, well-balanced structure offers excellent performance thanks to the Powerstate brushless motor, which guarantees up to 3 times longer life and up to twice as many cuts per charge.

It is powered by an 18V Redlithium battery (NOT included in the package) that is interchangeable with the devices of the Milwaukee M18TM Redlithium-ion platform, offering longer runtime and maximising battery life by protecting it from overload. Thanks to the Redlink Plus intelligent electronics, the individual cells are monitored, allowing constant communication between battery and motor for improved performance.

The M18 BLCS66-0X is supplied complete with 1 Milwaukee wood blade, diameter 165 mm with a bore of 15.87 mm, which ensures precise, clean cuts; the structure is ergonomic and well balanced, with mechanical components integrated with excellent innovative technologies; let us look at them in detail:

REDLITHIUM™ battery (NOT included) offering superior battery pack construction, electronics and consistent performance to deliver more runtime and more work over the life of the battery

Max cutting depth at 90° of 55 mm

Max cutting depth at 45° of 41 mm

Maximum bevel capacity 50°

Magnesium guard for maximum safety and durability

Magnesium base for lighter weight and maximum durability

Integrated dust extraction connection

Hook for storing the tool

Battery charge status indicator and integrated LED light

Heavy Duty case included in the supply

The new generation of Redlithium M18 batteries with Fuel technology fits over 215 tools, allowing the user to take on more professional applications.

Milwaukee M18 FSAGF125XB-0X - 125mm cordless angle grinder, with BRAKE

cordless angle grinder flex m18 fsagf125xb-0x

Milwaukee M18 FSAGF125XB-0X is the new flat-head angle grinder, delivering high performance for cutting, deburring and grinding operations. The Milwaukee cordless grinder accepts 125 mm discs and delivers performance comparable to that of a traditional 1200W corded grinder. The design of the grinder has been developed to allow it to be used even in confined spaces where traditional tools cannot operate.
The unique feature of this cordless grinder is the RAPIDSTOP system (motor brake), capable of stopping the disc in less than 2 seconds, for maximum user safety.
Equipped with a new-generation brushless motor that ensures a long tool life and no maintenance. The batteries (not included) feature electronic cell control for maximum power and overload protection.
The switch is a slide type positioned on the top of the body, and protection against accidental restart is also provided.

The supply also includes the AVS anti-vibration side handle.
The motor is protected by removable dust screens to prevent debris and dust from entering.
The guard is quick-release for maximum cutting capacity and rapid adjustment.
Batteries and charger are not included.

KIT M18 FPP2A3-502X:

M18 FPD3:

The brushless motor delivers power that was unimaginable until now

No maintenance or brush replacement required

The driver has an incredible power-to-weight ratio

The patented Milwaukee electronics maximise the strength and service life of the tool

All-metal chuck for maximum long-term durability

All-metal gearbox maximises the performance of the product and increases its service life over the years

Dual mode selector: drilling, driving, makes changing mode extremely fast

The LED bulb illuminates the work surface

5 Ah red lithium-ion batteries maximise the tool's run time

Battery charge display shows the actual remaining charge level

Voltage - battery capacity 18 / 5 V/Ah

No-load speed in 1/2 speed 0-550 / 0-2000 g/min

Blows per minute in percussion mode 32.000 Drilling diameter in steel / wood. 13 / 45 mm Max. torque 135 Nm

Weight with battery 2.0 kg

M18 FID3:

Voltage 18 no-load speed 0-850/ 0-2100/ 0-2900-/ 0 2900 rpm

Max torque 203 nm

4 speeds

Impact frequency 0-1750 (1st speed) 0-2850 (2nd speed) /0-3600 (3rd speed) impacts/min 0-3600 (4th speed with instant stop)

¼" hex drive for bits

Speed control yes

Length 140 mm

Weight with battery 1.5 kg

Compact and lightweight for one-handed use

LED bulb illuminates the work surface

Battery charge level display

Three selectable speeds for working from the smallest to the most demanding screw

Supplied with: in Milwaukee case 2 batteries 5 amp and fast charger

Milwaukee M18 power pack with 2 REDLITHIUM™ 3.0 Ah batteries and charger.

Product code 4933498616

The Milwaukee FORGENRG-802DBSC energy kit is a solution designed for purchasing a set consisting of 2 M18 FB8 Forge Output 8Ah batteries and the Milwaukee M18 DBSC simultaneous super rapid charger

The Milwaukee M18 FB8 Forge 8 Ah battery unleashes the power of the M18 HIGH OUTPUT™ 12 Ah battery in a more compact and lighter form. The Milwaukee REDLITHIUM™ FORGE™ electronics are the most powerful battery technology, charging faster and with a longer service life among REDLITHIUM batteries, reaching 80% charge in just 35 minutes when charged with the M18™ Simultaneous Super Rapid Charger.

The housing is designed to provide greater protection against the most common oils, solvents and greases, ensuring a longer battery pack life and greater efficiency under strain, with the best protection from environmental, weather and job site conditions.

The COOL-CYCLE active cooling system provides high-speed cooling to reduce downtime, offering greater runtime for the most demanding applications.

The charge status indicator has been improved to ensure greater visibility in sunlight. The intelligent REDLINK™ electronic system protects the battery pack from the harshest situations and ensures maximum performance.

The Milwaukee M18 DBSC simultaneous super rapid charger is up to 6 times faster than a standard charger, charging an M18™REDLITHIUM™ FORGE™ 6 Ah battery to 80% in just 15 minutes (2 in 36 minutes).

The M18 DBSC simultaneous super rapid charger can charge 2 M18™ batteries simultaneously thanks to adaptive distribution to maximise productivity. The COOL-CYCLE™ active cooling system provides high-speed cooling to reduce downtime. The active cooling function works with batteries featuring COOL-CYCLE™ functionality.

Thanks to the REDLINK electronics, the charger communicates with the battery pack to ensure optimised charging speed and performance. Wall mounting possible.