MILW. FUEL 18V DRILL + ANGLE GRINDER KIT + 1 BATTERY 5AH + 1 4A

Milwaukee M18 FUEL FMTIW2F12 18V impact wrench with 1/2" drive, kit with 2 x 5.0 Ah batteries, charger and case.

Milwaukee M18 ONEFHIWF1-802X FUEL ONE-KEY 1" impact wrench, with brushless motor, 2 x 8.0 Ah 18 V batteries and HD Box. Tightening torque 2,033 Nm.

Milwaukee M18 FSAGF125XB-0X - 125mm cordless angle grinder, with BRAKE

cordless angle grinder flex m18 fsagf125xb-0x

Milwaukee M18 FSAGF125XB-0X is the new flat-head angle grinder, delivering high performance for cutting, deburring and grinding operations. The Milwaukee cordless grinder accepts 125 mm discs and delivers performance comparable to that of a traditional 1200W corded grinder. The design of the grinder has been developed to allow it to be used even in confined spaces where traditional tools cannot operate.
The unique feature of this cordless grinder is the RAPIDSTOP system (motor brake), capable of stopping the disc in less than 2 seconds, for maximum user safety.
Equipped with a new-generation brushless motor that ensures a long tool life and no maintenance. The batteries (not included) feature electronic cell control for maximum power and overload protection.
The switch is a slide type positioned on the top of the body, and protection against accidental restart is also provided.

The supply also includes the AVS anti-vibration side handle.
The motor is protected by removable dust screens to prevent debris and dust from entering.
The guard is quick-release for maximum cutting capacity and rapid adjustment.
Batteries and charger are not included.

KIT M18 FPP2A3-502X:

M18 FPD3:

The brushless motor delivers power that was unimaginable until now

No maintenance or brush replacement required

The driver has an incredible power-to-weight ratio

The patented Milwaukee electronics maximise the strength and service life of the tool

All-metal chuck for maximum long-term durability

All-metal gearbox maximises the performance of the product and increases its service life over the years

Dual mode selector: drilling, driving, makes changing mode extremely fast

The LED bulb illuminates the work surface

5 Ah red lithium-ion batteries maximise the tool's run time

Battery charge display shows the actual remaining charge level

Voltage - battery capacity 18 / 5 V/Ah

No-load speed in 1/2 speed 0-550 / 0-2000 g/min

Blows per minute in percussion mode 32.000 Drilling diameter in steel / wood. 13 / 45 mm Max. torque 135 Nm

Weight with battery 2.0 kg

M18 FID3:

Voltage 18 no-load speed 0-850/ 0-2100/ 0-2900-/ 0 2900 rpm

Max torque 203 nm

4 speeds

Impact frequency 0-1750 (1st speed) 0-2850 (2nd speed) /0-3600 (3rd speed) impacts/min 0-3600 (4th speed with instant stop)

¼" hex drive for bits

Speed control yes

Length 140 mm

Weight with battery 1.5 kg

Compact and lightweight for one-handed use

LED bulb illuminates the work surface

Battery charge level display

Three selectable speeds for working from the smallest to the most demanding screw

Supplied with: in Milwaukee case 2 batteries 5 amp and fast charger

High-power impact wrench 18 Volt 3/4" 5.0Ah FUEL ONE KEY technology HeavyDuty case with friction ring F

M18 FUEL™ impact wrench with ONE-KEY™ technology, delivering 1627 Nm of tightening torque in a compact size (only 213 mm long)

System with 4 DRIVE CONTROL modes that lets you choose between four different speed and torque settings, for maximum flexibility across different applications.

Fourth mode for maximum torque and unrivalled control when removing bolts

Dimensions: length 210 mm, width 90 mm, Height 270 mm

The ONE-KEY™ Tracking & Security system offers a free cloud-based inventory tracking and management service, with remote lock and tool performance customisation features as well

FUEL™ technology redefines cordless power tools. The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

¾″ square drive with friction ring

Works with all M18™ MILWAUKEE® batteries

ONE-KEY™ customisation: ability to adjust the tool speed and the desired torque range (from 1 to 10)

Product specifications

DRIVE: 3/4"

NO-LOAD SPEED (RPM): 0-1.800

MAX TORQUE (NM): 1627

MAX BOLT CAPACITY (mm): M33

Volt: 18

Ah: 5

Net weight (kg): 7,552

M18 FMTIW2F12-0X |

Mid-torque impact wrench

M18 FUEL™ ½" DRIVE F

Mid-torque impact wrench capable of delivering up to 745 Nm of tightening torque

Compact: total length 152 mm, for applications in confined spaces

System with 4 DRIVE CONTROL modes that lets you choose between four different speed and torque settings, for maximum flexibility across different applications

Bolt Removal mode for greater control when loosening: speed decreases once the bolt is loosened to prevent it from falling

Auto Shut-Off mode to prevent over-torque tightening: max 47 Nm of torque applied for optimised applications

Tri-LED lighting to illuminate the work area

½" square friction ring

Impact rate (blows/min) 0-900 / 0-2100 / 0-3100

No-load speed (rpm) 0-1250 / 0-1950 / 0-2575 / 0-1325 Max torque (Nm) 475 / 610 / 745 / 47

Max loosening torque (Nm) 881

Kit included Supplied without batteries, Supplied without charger, HeavyDuty case

Product code 4933478449

Milwaukee M18 BLHSB-0 mini pistol-grip blower, brushless motor, up to 1.1 m³/min of air at 918 km/h, 3 speeds, integrated LED. Body only, without batteries. Art. 4933500533.

Milwaukee M18 BLPP2A3-502X KIT is a kit consisting of the M18 BLPD2 hammer drill and the M18 BLIDR ¼″Hex impact driver

The Milwaukee M18 BLPD2 hammer drill with brushless motor, which delivers up to 40% more maximum torque than the previous model, has a power of up to 82 Nm. The design is compact, with an overall length of 180 mm, and a 13 mm chuck for better bit holder retention and improved grip. The speed is optimised for drilling and screwdriving applications (0-550 / 0-1800 rpm).

The REDLINK PLUS electronics provide greater overload protection for tool and battery, ensuring longer life in demanding applications. The REDLITHIUM battery ensures advanced battery pack construction and consistent performance, to offer longer runtime and maximise battery life, with a battery charge status indicator and LED light to illuminate the work area.

Milwaukee M18 BLPD2 includes a belt hook. Compatible with all M18™ MILWAUKEE batteries

Item code 4933464516

The Milwaukee M18 BLIDR impact driver, fitted with a brushless motor, delivers a tightening torque of 190 Nm with 3600 rpm and 4900 blows per minute and 3 adjustable speeds.  The compact design and overall length of only 112 mm allow use in the tightest spaces, with a 1/4″ hex drive. The Milwaukee M18 BLIDR impact driver features 3 DRIVE CONTROL modes that allow the user to select different speeds and torques.

The REDLITHIUM battery ensures advanced battery pack construction and consistent performance, to offer longer runtime and maximise battery life, with a battery charge status indicator, and the LED located on the front provides excellent illumination of the work area. The REDLINK PLUS electronics protect the tool and battery against overload, ensuring longer life. The bit can be inserted with one hand only, making the work faster and more practical.

Milwaukee M18 BLIDR includes a belt hook. Compatible with all M18™ MILWAUKEE batteries

Item code 4933492842

The Milwaukee M18 BLPP2A3-502X kit includes 2 x M18 B5 batteries (18V 5.0 Ah), M12-18 FC charger, 1 HeavyDuty case.

Product code 4933492844

M18 BLPDRC DRIVER

This hammer drill measures only 145 mm

The 13 mm metal chuck ensures exceptional grip on bits or inserts

The best torque-to-size ratio, a full 60 Nm

Fitted with a reversible metal belt hook

Battery charge indicator and LED light to illuminate the work area

The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

Works with all M18™ MILWAUKEE® batteries

Speed optimised for faster drilling and fastening (0 - 550/ 0 - 1700 rpm)

M18 FH-0 ROTARY HAMMER

High performance

AUTOSTOP™ system, for maximum safety

Minimal vibration

The fastest SDS-Plus rotary hammer in its class, for maximum productivity

Capable of delivering 2,5 J of impact energy with minimal vibration (12.9 m/s²)

Capable of drilling up to 125 holes ⌀10 x 50 mm on a single battery charge (M18™ HIGH OUTPUT™ 5.5 Ah)

AUTOSTOP™ system, switches the tool off to protect the user in the event of sudden rotation

Metal gearbox, for maximum strength

4 operating modes: rotary hammer, chiselling, rotation and neutral position for chisel positioning

Compatible with the M18 FCDDEXL and M18 FDDEXL dust extraction units

FUEL™ technology redefines cordless power tools.

Works with all M18™ MILWAUKEE® batteries

M18 FSAG-125-0X ANGLE GRINDER:

Capable of delivering performance equal to 1,200 W

RAPIDSTOP™ system capable of braking the disc in less than 2 seconds, for greater safety

Reduced head size and optimised battery housing: maximum manoeuvrability

AVS anti-vibration side handle FIXTEC™ system for tool-free disc changes

Ergonomic handle Removable dust screens, to protect the motor from abrasive dust

Quick-release guard: maximum cutting capacity and rapid adjustment

Protection against accidental restart

The new-generation POWERSTATE™ brushless motor, REDLINK electronics Compatible with all MILWAUKEE® M18™ batteries

Supplied with: M18 FH ROTARY HAMMER, M18 BLPDRC DRIVER M18 FSAG125 ANGLE GRINDER, 3 BATTERIES 1 CHARGER 2 CASES

Milwaukee M18 Fuel cordless angle grinder with 125mm disc, slide switch and 5-speed selector for applications on STAINLESS steel and aluminium or for removing rust and paint.

High-performance brushless motor

Power comparable to a 1200W corded tool

Long-runtime battery

5-speed selector for maximum control

Ideal for applications on stainless steel and aluminium

125 mm disc

RAPIDSTOP™ system capable of braking the disc in less than 2 seconds

Reduced head size for maximum manoeuvrability

AVS anti-vibration side handle

FIXTEC™ system for tool-free disc changes

Quick-release guard

Protection against accidental restart

Compatible with all MILWAUKEE® M18™ batteries

Details of the M18 FUEL Milwaukee grinder

Included in the price

1x M18 Fuel FSAGV125XB angle grinder

1x Protective guard

1x AVS side handle

1x Deburring guard

1x Pin spanner

1x Dust screen

18 Volt 26 mm rotary hammer FUEL technology HeavyDuty case - without battery

The fastest SDS-Plus rotary hammer in its class, for maximum productivity

Capable of delivering 2,5 J of impact energy with minimal vibration (12.9 m/s²)

Capable of drilling up to 125 holes of ⌀10 x 50 mm on a single battery charge (M18™ HIGH OUTPUT™ 5.5 Ah)

AUTOSTOP™ system switches the tool off to protect the user in the event of sudden rotation

Metal gearbox, for maximum durability

4 operating modes: rotary hammer action, chiselling, rotation and neutral position for chisel orientation

Compatible with the M18 FCDDEXL and M18 FDDEXL dust extraction units

FUEL™ technology redefines cordless power tools. The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

HIGH OUTPUT™ system raises the performance and runtime of M18 FUEL™ technology

Product specifications

IMPACT ENERGY (J): 2,5

BLOWS/MIN: 0-4800

DRILLING CAPACITY (MM): 26

Volt: 18

Ah: -

Net weight (kg): 6,226

Product code 4933498616

The Milwaukee FORGENRG-802DBSC energy kit is a solution designed for purchasing a set consisting of 2 M18 FB8 Forge Output 8Ah batteries and the Milwaukee M18 DBSC simultaneous super rapid charger

The Milwaukee M18 FB8 Forge 8 Ah battery unleashes the power of the M18 HIGH OUTPUT™ 12 Ah battery in a more compact and lighter form. The Milwaukee REDLITHIUM™ FORGE™ electronics are the most powerful battery technology, charging faster and with a longer service life among REDLITHIUM batteries, reaching 80% charge in just 35 minutes when charged with the M18™ Simultaneous Super Rapid Charger.

The housing is designed to provide greater protection against the most common oils, solvents and greases, ensuring a longer battery pack life and greater efficiency under strain, with the best protection from environmental, weather and job site conditions.

The COOL-CYCLE active cooling system provides high-speed cooling to reduce downtime, offering greater runtime for the most demanding applications.

The charge status indicator has been improved to ensure greater visibility in sunlight. The intelligent REDLINK™ electronic system protects the battery pack from the harshest situations and ensures maximum performance.

The Milwaukee M18 DBSC simultaneous super rapid charger is up to 6 times faster than a standard charger, charging an M18™REDLITHIUM™ FORGE™ 6 Ah battery to 80% in just 15 minutes (2 in 36 minutes).

The M18 DBSC simultaneous super rapid charger can charge 2 M18™ batteries simultaneously thanks to adaptive distribution to maximise productivity. The COOL-CYCLE™ active cooling system provides high-speed cooling to reduce downtime. The active cooling function works with batteries featuring COOL-CYCLE™ functionality.

Thanks to the REDLINK electronics, the charger communicates with the battery pack to ensure optimised charging speed and performance. Wall mounting possible.

M18 FSZ-0:

POWERSTATE™ brushless motor for 5 times longer service life and cuts up to 30% faster

Patented protective clutch - increases gear life by absorbing any sudden blade jams

The FIXTEC™ blade clamp allows simple and quick blade changes

Metal battery connection protection for increased durability and service life

LED light to illuminate the work area

Adjustable shoe for optimal use when cutting

Battery charge indicator

Durable hook for storing or hanging the tool for reasons of space or safety

FUEL™ technology redefines cordless power tools. The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

Works with all M18™ MILWAUKEE® batteries

Supplied with: M18 FSZ-0 body only in case

Machines in stock, delivery 24-48 hours

M18 FID3-0X:

The speed increases as pressure on the trigger increases. This feature allows controlled acceleration so that even the smallest screws can be driven, avoiding stripping them.

Only 113 mm long, it can reach even the tightest spaces

226 Nm of torque

Three LED lights on the front perfectly illuminate the work area

3 “Drive Control” speeds + automatic torque adjustment function

3900 revolutions per minute

Less than 1 Kg

Supplied with: 2 18V 5.0 Ah batteries, battery charger, stackable Heavy Duty case

Supplied with: body only

Milwaukee M18 FPP4E-555T - Hammer drill - Rotary hammer - ONE KEY angle grinder - 1/4" impact driver

M18 FPD3 - 18V hammer drill, brushless motor, FUEL technology, 2 speeds, 158 nM of torque and 33,000 rpm

M18 FHX - 18V rotary hammer, brushless motor, FUEL technology, 2,5J, 26 mm hole, anti-vibration, 4.5 Kg

M18 ONEFSAG125XB - Angle grinder with slide switch, brushless motor, FUEL technology, motor brake, disc diameter 125, max cutting depth 33 mm, ONE-KEY system for inventory and tracking, 2.7 kg

M18 FID3 - 18V impact driver, High Output, 1/4" hex drive, 226 nm, 4 speeds

Supplied with: 3 x 18V High Output batteries (2 x 5.5 Ah + 1 x 3Ah), 1 rapid charger, Packout trolley

18 Volt rotary hammer (FIXTEC) 26 mm Brushless HeavyDuty case - without battery

Powerful hammering mechanism and brushless motor capable of delivering 2,3 J of energy

Compact, ergonomic design for maximum comfort during use

FIXTEC™ system for keyless chuck change (SDS-Plus and 13 mm metal chuck)

Metal gearbox housing, for maximum strength

4 operating modes: hammer drilling, chiselling, drilling and neutral position for chisel positioning

Anti-vibration side handle

Compatible with the M18 CDEX dust extraction unit

The brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery pack deliver superior performance and durability

Works with all M18™ MILWAUKEE® batteries

Product specifications

IMPACT ENERGY (J): 2,3

BLOWS/MIN: 0-5100

DRILLING CAPACITY (MM): 26

Volt: 18

Ah: -

Net weight (kg): 7,19