Cutting & Drilling

Large cutting edge with chamfered corners. Ensures lower vibration and optimum drilling performance in reinforced concrete applications. Longer bit life over time.

4 x 90° head geometry. Allows precise holes and excellent drilling performance, even when reinforcement is present.

130° Primary Cutting Edge. The 130° cutting edge angle allows optimum performance in applications where reinforcement is present and excellent hole accuracy.

Secondary Cutting Edge. Robust, to support the primary cutting edge during drilling, for faster drilling.

Short flute for better dust extraction and faster drilling speed, less wear and less heat build-up.

Thicker Primary Cutting Edge with a higher percentage of carbide, and on Ø > 32 mm a further higher percentage of carbide for longer life.

Groove located at the side of the primary cutting edge, which allows the wear of the bit to be checked. Milwaukee guarantees its bit up to 75 m.

Reinforced bit section. This gives lower vibration, fewer breakages and the best transfer of the tool's power to the bit.

Deep flute shoulder. This allows greater and faster dust extraction and less heat build-up on the bit head, and therefore less wear.

Lower Vibration. Comfortable drilling with less stress for the user and for the tool.

Special surface treatment. For easier dust flow along the bit surface and lower friction.

PGM Mark. Guarantees precise, accurate holes and maximum anchor holding strength.

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

4932343734

Ideal for a wide range of applications on concrete.

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

4932478267

Up to 2 times longer life than standard chisels.

Self-sharpening, maximum performance for longer.

Maximum working surface, greater productivity, greater removal.

Ground tip. Sharper, faster and prevents jamming.

Made in Germany.

4932478266

Up to 2 times longer life than standard chisels.

Self-sharpening, maximum performance for longer.

Maximum working surface, greater productivity, greater removal.

Ground tip. Sharper, faster and prevents jamming.

Made in Germany.

4932399234

Ideal for removing plaster and ceramic tiles from walls.

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

Large cutting edge with chamfered corners. Ensures lower vibration and optimum drilling performance in reinforced concrete applications. Longer bit life over time.

4 x 90° head geometry. Allows precise holes and excellent drilling performance, even when reinforcement is present.

130° Primary Cutting Edge. The 130° cutting edge angle allows optimum performance in applications where reinforcement is present and excellent hole accuracy.

Secondary Cutting Edge. Robust, to support the primary cutting edge during drilling, for faster drilling.

Short flute for better dust extraction and faster drilling speed, less wear and less heat build-up.

Thicker Primary Cutting Edge with a higher percentage of carbide, and on Ø > 32 mm a further higher percentage of carbide for longer life.

Groove located at the side of the primary cutting edge, which allows the wear of the bit to be checked. Milwaukee guarantees its bit up to 75 m.

Reinforced bit section. This gives lower vibration, fewer breakages and the best transfer of the tool's power to the bit.

Deep flute shoulder. This allows greater and faster dust extraction and less heat build-up on the bit head, and therefore less wear.

Lower Vibration. Comfortable drilling with less stress for the user and for the tool.

Special surface treatment. For easier dust flow along the bit surface and lower friction.

PGM Mark. Guarantees precise, accurate holes and maximum anchor holding strength.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

Milwaukee 4932430001 - Set of 3 SDS-plus chisels: 1 x pointed, 1 x flat, 1 x wide

• Chisels 1 x pointed, 1 x flat, 1 x wide.
• Overall length (mm) 250 mm

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

Milwaukee SG27P PRO+ flap disc for angle grinder, for grinding and deburring metals.

SHOCKWAVE™ step drill bits have been studied and designed for use on impact drivers. The 1/4" hex shank with SHOCKZONE™ ensures maximum durability and avoids premature breakage of the drive end.

Aluminium titanium nitride coating for up to 5 times longer life.

Double spiral flute: optimised for impact drivers.

RAPID STRIKE TIP™: centring point for better centring, without the need to drill a pilot hole.

Laser-engraved diameters for better visibility, even in the long term.

48899265

SHOCKWAVE™ step drill bits are designed and engineered for use on impact drivers. The 1/4" hex shank with SHOCKZONE™ ensures maximum durability and prevents premature breakage of the connection.

Aluminium titanium nitride coating for up to 5 times longer life.

Double spiral flute: optimised for impact drivers.

RAPID STRIKE TIP™: centring point for better centring, with no need for a pilot hole.

Laser-etched diameters for better visibility, even in the long term.

Staples for M18 FFUS. Compatible only with the Milwaukee tool.

For all types of fences made of wood, e.g. livestock fencing, square mesh/chain-link/barbed wire and high-tensile wire.

Hot-dip galvanised coating for superior corrosion resistance.

4 mm thickness for the best durability in outdoor applications.

Sharp, divergent points: the staple point twists as it is driven into the wood, offering a better hold.

Red adhesive coating for improved drivability while maximising holding force.

Collated with paper tape.

Milwaukee 48899320 - Step drill bit 4 - 20 MM

Centring point for better centring, with no need for a pilot hole.

The tip geometry allows extremely precise drilling without leaving burrs and avoiding skipping that could damage the material.

Optimised 2-flute geometry with a very sharp edge that makes it up to 2 times faster.

Made from custom-engineered steel with a black obsidian coating for longer life, up to 4 times longer than conventional step drill bits.

48899340

Suitable for drilling the following materials :

Ferrous and non-ferrous sheet metal

Profiles and tubes

Copper, brass and aluminium

Stainless steel

Plastic

Panels and junction boxes

In plumbing , access holes for pipes and installations

Maximum material thickness 4 mm

Shank diameter (mm) 10

Length (mm) 90

No. of steps 17

Material : Custom-engineered steel with a black obsidian coating

STEP DRILL BIT UP TO 28.3 MM:

Step drill bits are ideal for drilling the following materials: - Ferrous and non-ferrous sheet metal, profiles and tubes. - Copper, brass and aluminium. - Steel

Electricians: drilling of panels and boxes for the installation of cable glands. - Plumbing / HVAC: access holes for pipes and installations

The main advantages over drilling with conventional drill bits are: with one step drill bit you can drill several sizes - Better for enlarging holes

Surface countersinking, drilling and deburring all in a single operation.

Centring point for better centring, with no need for a pilot hole.

The tip geometry allows extremely precise drilling without leaving burrs and avoiding skipping.

Optimised 2-flute geometry with a very sharp edge that makes it up to 2 times faster.

Made from custom-engineered steel with a black obsidian coating for longer life, up to 4 times longer.

Optimised for use with the high speeds of cordless tools.

Laser-etched diameters for better visibility, even in the long term.

Deburrs automatically.

Maximum shank grip in the chuck to ensure maximum torque transmission.

No. of steps 9

steps 6- 9- 12,5 pg7- 15,2 pg9 - 18,6 pg11- 20,4pg 13,5- 22,5 pg16 -25,5- 28,3 pg21

Shank diameter (mm) 10

Overall length (mm) 68

Product code 48899321

Pack quantity 1

Step drill bits are ideal for drilling the following materials: - Ferrous and non-ferrous sheet metal, profiles and tubes. - Copper, brass and aluminium. - Stainless steel. - Plastic. - Maximum material thickness 4 mm. - For best durability, the use of a coolant/lubricant is recommended.

Electricians: drilling panels and boxes for cable gland installation. - Plumbing / HVAC: access holes for pipework and installations. - Metal fabricators: various sizes and enlarging holes. - Automotive: holes for cable installation (mobile phones, aerials, rerouting of electrical cables). - Maintenance technicians: various applications with different diameters and hole enlarging.

The main advantages over drilling with conventional drill bits are: with one step drill bit several sizes can be drilled - Better for enlarging existing holes. - More durable than twist drill bits. - More precise. - Cleaner holes. - Drilling in different types of plastic without cracking.

48899399

Milwaukee benefits

Surface dishing, drilling and deburring all in one motion.

Centring point for better centring, without the need to drill a pilot hole.

The geometry of the bit allows extremely precise drilling without leaving burrs and avoiding the skipping that could damage the material.

Optimised 2-flute geometry with a very sharp edge that makes it up to 2 times faster.

Custom-designed steel product with black obsidian coating for longer life, up to 4 times longer than conventional step drill bits.

Optimised for use at the high speeds of cordless tools.

Laser-engraved diameters for better visibility, even in the long term.

Removes burrs automatically.

Maximum shank grip in the chuck to ensure maximum torque transmission.

The kit includes:

Includes step drill bits 4 - 12 mm/1, 4 - 20 mm, 6 - 35 mm

Drill bits with 1/4˝ hex shank optimised for impact drivers.

Titanium nitride coating helps cool the drill bit and allows it to be used even at high speeds

The 135° point geometry reduces drill bit slipping and allows maximum drilling precision, without overheating.

Variable design flute. This allows faster material ejection and reduces accumulated heat, all for greater efficiency.

Sturdier design for greater durability and drill bit service life

CASE OF 19 SW REDHEX HSS-G METAL DRILL BITS - ITEM MILWAUKEE 4932493866.
Drill bits from 2 mm. to 10 mm., with 1/4" hex shank, for drills and impact drivers.
Titanium nitride coating that helps cool the drill bit and allows use even at high speeds.
135° drill bit point geometry that reduces walking and allows maximum drilling accuracy, without overheating the bit.
Variable design flute for faster material ejection and reduced heat build-up, all for greater efficiency.
More robust design for greater durability and drill bit service life.

4932430141

SET OF 5 BLADES:

All our curve blades feature a narrow blade body for better manoeuvrability.

The following jigsaw blades have teeth on both sides.

Triple tooth geometry for fast, free and super-clean cuts. Plunge cutting.

Max cutting capacity in wood (mm): 3-60

Max cutting capacity in chipboard (mm): 3-60

Blade length (mm): 91

Pack quantity: 5pcs

4932430285

The jaws for M12™ and M18™ FORCE LOGIC™ press tools are designed to meet the highest standards of quality and durability. Thanks to the ability to open them easily with a thumb, these jaws are the most convenient and practical pressing solution for diameters of up to 108 mm.

Metal inner structure for maximum durability.

Metal ends for longer life.

Size engraved on the blade and on the handle for easy identification.

Blade case for safe transport.

Product specifications

Net weight (kg): 1,28

Suitable for plywood, chipboard and natural woods of any hardness. Manufactured to DIN 7487 E.

Manufactured to DIN 7487 E.

PTFE coating: cool cutting, non-stick for faster cuts

Protects against corrosion and resin build-up.

Expansion slots: low vibration and greater precision

The slots are filled with polyurethane and act as dampers, isolating the teeth from vibration.

High-quality laser-cut steel: guaranteed precision.

Cobalt tungsten carbide teeth: sharp, clean cuts.

* Thin kerf: optimised for cordless tools, extra-thin cutting width to increase the number of cuts per charge.

* All types of wood: softwood / hardwood, plywood, laminated chipboard, melamine, MDF

** Identifies standard blades without PTFE coating and expansion slots.