The Stayer 369 drill is a compact and reliable power tool, designed for drilling and screwdriving in wood, metal and light masonry. Fitted with a keyless chuck, variable speed and reversible rotation, it ensures precision, control and speed of use. The ergonomic design provides comfort and stability even during prolonged use.

Ideal for: advanced domestic use and light professional applications.

The Stayer BHL 111 K is a 12 V cordless drill/driver with two speeds and electronic rotation control, suitable for drilling and screwdriving in light materials.

Technical data:

Battery voltage: 12 V

Battery capacity: 1.5 Ah (included); 2 batteries included

No-load speed: 0‑350 / 0‑1 350 rpm

Chuck capacity: Ø 1.5 – Ø 10 mm

Chuck thread: 3/8″ x 24 UNF

Tightening torque: 32 Nm

Clutch settings: 16 + 2

Wood drilling capacity: Ø 20 mm

Steel drilling capacity: Ø 10 mm

Masonry drilling capacity: Ø 10 mm

Weight: approx. 0.9 kg

Accessories included: charger, 2 batteries, PE‑HD case

The Stayer H2‑M14 mixing paddle is an accessory for mixers and drills with M14 threaded connection, designed for mixing low/moderate viscosity materials by moving the propellers from the bottom upwards.

According to the official Stayer catalogue, the H2 series is intended for mixing liquid and low-viscosity materials, with a specific propeller geometry to carry the material upwards during rotation.

Technical data:

Connection: M14 (standard tool/mixer thread)

Propeller type: H2 – mixing from the bottom upwards

Recommended materials (category): liquid and low-viscosity

Available diameter (H2 models): Ø 120 mm / Ø 140 mm (item codes 12.231 and 12.232)

The Stayer H3‑M14 mixing paddle is a mixing accessory with M14 thread connection, designed to achieve uniform mixing of materials of different density and viscosity (paints, mortars, fillers, adhesives, etc.) by rotation from the bottom upwards.

Technical data:

Model: H3 (code 12.233 / 12.234 depending on diameter)

Connection: M14 (standard tool/mixer thread)

Propeller diameter: Ø 140 mm (H3)

Application: mixing of materials with various densities and viscosities, uniform mixing from the bottom upwards

Compatibility: tools and mixers with M14 connection (chuck or threaded fitting)

The STAYER LU 260 CE is an electric polisher designed for finishing operations on metal surfaces, with precise speed control and robust construction.

Technical data:

Motor power: 1,200 W

Variable speed: 600 – 3,200 rpm (6 levels)

Disc/plate diameter: Ø 180 mm

Connection: M14

Adjustable auxiliary handle

Spindle lock button

Weight: approx. 3 kg

Accessories included: rubber backing plate, wool bonnet, service spanner

The Stayer M 1200 C is an electric paddle mixer with an H2 Ø 120 mm mixing paddle, designed for mixing paints, liquids, mortars and materials of varying viscosity by means of electronic control and two mechanical speeds.

Technical data:

Motor power: 1,200 W

No-load speed: 200‑400 / 350‑700 rpm

Chuck connection: M14

Supplied mixing paddle diameter: Ø 120 mm (H2)

Tightening torque: 20.5 Nm

Weight: approx. 4.8 kg

Electronic speed control: 6 speeds

Mechanical speeds: 2 gears

The Stayer M 1600K is an electric paddle mixer with an M14 connection and one mixing paddle supplied (H3 Ø 140 mm), designed for mixing liquid and viscous materials with electronic speed control and two mechanical speeds.

Technical data:

Motor power: 1,600 W

No-load speed: 300 – 650 rpm

Chuck connection: M14

Supplied mixing paddle diameter: Ø 140 mm (model H3)

Tightening torque: 17 Nm

Speed configuration: 2 mechanical speeds + 6-level electronic speed control

Weight: approx. 6 kg

Body: aluminium construction

Soft start (progressive start-up): present

Standard supply: 1 H3 Ø 140 mm mixing paddle, PE‑HD case

The Stayer MD15K is a single-function electric demolition hammer designed for demolition applications with a 30 mm hexagonal bit, with compact construction and an anti-vibration system.

Technical data:

Function: demolition

Motor power: 1,750 W

Impact rate: approx. 1.380 ipm

Impact energy: 45 J

Tool holder: 30 mm hexagonal

Weight: approx. 15 kg

Anti-vibration system (VAT – Vibration Absorbing Technology)

Side handle

Typically supplied with: chisel and bit included

The Stayer MIG 131 MULTI is a compact inverter welder powered at 230 V, combining MIG welding with gasless flux-cored wire (Flux Core), MMA with coated electrodes and TIG with lift-start (LIFT), offering simple and intuitive adjustment of current and wire speed via analogue controls.

The WD3 114/140 mixing paddle is a mixing accessory compatible with mixers/Stayer and tools fitted with a standard M14 connection, designed for mixing low/medium viscosity materials such as paints, light plasters and similar compounds, thanks to the geometry of the propellers.

Technical data:

Accessory type: mixing paddle

Connection: M14

Propeller diameter: 114 mm / 140 mm

Material: steel or treated metal alloy

Application: mixing of materials of variable viscosity; suitable for mixers with M14 connection

Compatibility: tools and mixers with M14 chuck/connection

Stayer SC250 PRO mitre saw combined with a Ø 250 mm blade and upper cutting table, designed for straight, 45°/90° and bevel cuts in wood, aluminium, laminates, PVC and plastic with safety and versatility.

The Stayer SN1470 bandsaw is a professional electric machine for metalworking, designed to deliver precise and versatile cuts in workshops and laboratories. Fitted with a single-phase induction motor and a robust aluminium/cast iron structure, it ensures reliability and durability even under heavy workloads.

Main features

1470 × 13 × 0.65 mm band blade for continuous, even cuts.

High-performance single-phase induction motor.

Cutting capacity at 90°: round section Ø100 mm, square 100×100 mm, rectangular 100×150 mm.

Cutting capacity at 45°: round section Ø75 mm, square 63×63 mm, rectangular 63×100 mm.

Adjustable blade tilt from 0° to 45°.

Integrated quick-action vice for secure workpiece clamping.

Practical and fast blade tensioning system.

Ideal for: cutting metal tubes, sections and bars with precision and repeatability.

The Telwin 801097 TIG Welding Kit is a complete TIG accessory kit designed for TIG welding with suitable inverter or multiprocess welders, providing everything needed to start working with argon gas and achieve clean welds on steel and stainless steel. This kit is ideal as an add-on to the Telwin MIG 131 MULTI 8300838 to extend its capabilities to TIG welding (scratch start), making the machine more versatile for professional and maintenance work.

The Ø 115 mm wool bonnet with Velcro fastening is an accessory for polishers and tools compatible with self-centring Velcro backing pads, designed for polishing work on metal surfaces, wood, glass or other compatible materials.

Technical data:

Outside diameter: 115 mm

Material: wool (lambswool or natural wool)

Fastening: Velcro system (hook-and-loop)