Lavor Wash spare cap, item no. 4.608.0027, with a diameter of 30 mm, for the Fire 100 tank. It closes the opening of the tank and is replaced when the original is damaged or has been lost.
List of products by brand LAVORWASH
Lavor Wash: professional and domestic cleaning machines made in Italy. Cold and hot water pressure washers, vacuum cleaners, floor scrubber dryers, sweepers, steam generators and accessories. Buy on MisterAnt.
Lavor Wash is an Italian brand, a world leader in the design and production of cleaning machines, with over 50 years of experience and solutions for domestic, professional and industrial use. It has been part of the COMET group since 2017.
The range includes: cold water and hot water pressure washers (electric and petrol-engine), dry and wet vacuum cleaners, industrial vacuum cleaners, ash vacuum cleaners, carpet and upholstery cleaners, floor scrubber dryers, sweepers, single-disc machines, steam generators, sprayers and foam lances, submersible and garden pumps. The catalogue also includes a wide selection of accessories: lances, guns, nozzles, high-pressure hoses, water brushes, drain cleaning probes, filters and filter bags.
Lavor products stand out for reliability, ease of use and excellent value for money, with solutions suited to every need: from domestic cleaning of cars, patios and gardens to intensive use in workshops, building sites, car washes, the Ho.Re.Ca. sector and cleaning companies.
On MisterAnt you will find the entire Lavor Wash range at competitive prices, with fast shipping throughout Italy.
There are 313 products.
Lavor Wash assembly item no. 5.609.Y154: hose barb with O-Ring, L7 spring in ø 0.4 mm wire and ø 5.5 mm ball in a single spare part. Compatibility to be verified on your own model.
Lavor Wash pressure gauge with 50 mm dial, 0-315 bar scale, 1/4" rear connection and fixing bracket, item no. 3.107.0004. For checking the working pressure.
Lavor Wash pressure gauge hose with a pressure of 630 bar and 1/4" female/female connections, for connecting a pressure gauge. Check the thread and length before ordering.
Pressure regulator kit for brass head model '99, item no. 6.005.0120, Lavor Wash. A spare part to restore pressure regulation; compatibility to be verified on your own model.
Lavor Wash pressure washer nozzle with 1/4" thread, 15° spray angle and flow factor 03. Spare part to be matched to your own pump after checking compatibility.
Lavor Wash nozzle for pressure washer with 1/4" thread, 15° spray angle and flow factor 04. To be matched to your own pump, once you have checked the model.
Lavor Wash pressure washer nozzle with 1/4" thread, 15° spray angle and flow factor 045. Spare part to be chosen according to the pump, after checking the model.
Lavor Wash nozzle for pressure washer with 1/4" thread, 15° spray angle and flow factor 05. Before ordering, check that the values are those indicated by your machine.
Lavor Wash nozzle for pressure washer with 1/4" thread, 15° spray angle and flow factor 06. Spare part to be chosen according to the pump and the model of the machine.
Lavor Wash pressure washer nozzle with 1/4" thread, 15° spray angle and flow factor 08. Spare part to be matched to the pump after checking the model.
Lavor Wash nozzle for pressure washer with 1/8" thread, 0° spray angle and flow factor 045. Direct pinpoint jet, spare part to be checked against your own model.
Lavor Wash pressure washer nozzle with 1/8" thread, 15° spray angle and flow factor 14. Spare part to be matched to your own pump, checking the model first.
Pressure washer nozzle with 1/8" thread, 25° spray angle and flow factor 030. Wider jet for large surfaces, spare part to be checked against your own model.
Pressure washer nozzle with 1/8" thread, 25° spray angle and flow factor 070. Wide jet for large surfaces, spare part to be matched to the pump after checking the model.
Pair of professional electrodes with bracket Lavor Wash, item no. 4.614.0004: ordered under a single code, it replaces the electrodes and support as a set. Compatibility to be verified on your own model.
Lavor Wash 10 bar quick-connect coupling with 3/8" female connection, item no. 28.0200.10: for quickly connecting hoses and accessories on compressed air or low-pressure water circuits.
Lavor Wash 250 bar quick-connect coupling, part A only, with 1/2" male thread, item no. 26.2024.61: spare part for high-pressure circuits, to be paired with the matching part.
Lavor Wash 250 bar quick-connect coupling in part A only, 3/8" female thread, item no. 26.2035.61: spare element for high-pressure systems, to be paired with the compatible part.
Lavor Wash 250 bar quick-connect coupling, part A only, with 3/8" female thread, item no. 26.2015.61: spare part for high-pressure connections, to be paired with the matching part.
Extended quick coupling with gasket Lavor Wash, item no. 5.009.0611: a spare part for pressure washers, to be verified on your own model, for connecting and disconnecting hoses in one motion.
Return spring for Lavor Wash piston, diameter 14-12 mm, item no. 4.007.0025. Spare part for the pump: compatibility with your own model to be checked before ordering.
Pressure washer gun Lavor Wash RL20 with 3/8" male inlet and G1/4 female outlet, item no. 30.0100.60. Spare part for the hose and lance line, with control trigger.
Lavor Wash sealing rod assembly for brass head mod. '99 without TS, item no. 5.609.0150: a complete spare part with fitting and seat. Compatibility to be verified on your own model.
Rod spring for compensating valve mod. '02 by Lavor Wash, internal diameter 7.3 mm, length 11 mm, wire 1.3 mm, item no. 4.007.0284. Compatibility to be checked against your own model.
Lavor Wash Rotox S97 brass lance with a 1.10 mm rotating nozzle, item no. 10001-09273. Sturdy lance for cleaning dirty surfaces with a pressure washer.
Lavor Wash S 10 gun for pressure washer, supplied with a 1/4" adapter and a swivel quick coupling: a kit ready to connect the delivery hose. Compatibility to be checked against your own model.
Lavor Wash S 10Y gun with quick coupling for pressure washer: ergonomic lever and fast connection of the high-pressure hose. Type of coupling to be checked against your own model.
Lavor Wash S'09 gun with built-in quick coupling and 1/4" thread: fast hose connection without additional adapters. Compatibility to be checked against your own model.
Head for lance S/12 with 0.9 mm diameter nozzle and quick coupling, spare accessory for pressure washers. Before ordering, check compatibility with the lance and with your own model.
Abrasive sand for sandblasters in a 5 kg tub, Lavor Wash brand: for sandblasting and cleaning surfaces. Check compatibility with your own sandblaster before use.
Low-version seal support ring D.12 Lavor Wash, item no. 4.006.0251: a spare part that holds the sealing gasket in position during the overhaul of the pump.
Low-version seal support ring D.14 Lavor Wash, item no. 4.006.0085: a spare part supporting the gasket, 14 mm in diameter, to be checked against the original part.
Support ring for second seal 130/8 Lavor Wash, item no. 4.606.0041: a spare part that supports the second sealing gasket in its seat and keeps it in position.
Seal retaining ring (sealing holder ring) of 14 mm, item no. 4.006.0036, Lavor Wash brand: spare part for pump units. Compatibility to be checked against your own model.
PDF sealing ring 15x25x5 mm, ref. G1N84-1046, item no. 3.201.0006, Lavor Wash brand. Dimensions 15 x 25 x 5 mm: compatibility to be checked against your own model.
Bush for second seal Lavor Wash, size 130/8, item no. 4.606.0040: a spare part to restore the housing of the second gasket. Compatibility to be verified on your own model.
Spacer kit with centring ring for Nilo motor, item no. 6.205.0127, Lavor Wash. Spare part for the coupling between motor and pump; compatibility to be checked on your own model.
Lavor Wash spare nozzle for sprayer lance, with a 1.5 mm orifice. Accessory for pressure washers; compatibility with your own lance to be checked before ordering.
