By Brand

4933464579

Powerful, robust and compact rotary hammer for drilling applications in masonry and concrete

Maximum impact energy of 2,4 J with a high blow rate per minute

Powerful 800 W motor, even for the most demanding applications

Optimised for holes from 6 to 16 mm

Safety clutch to protect the operator if the bit jams

The X version is supplied with a FIXTEC™ chuck for straight-shank bits

Supplied with a 4 metre cable

Energy Kit M18 NRG-503 Milwaukee

Consisting of 3 x 5Ah batteries + 12-18V charger

M18 5Ah battery:

Sophisticated electronics: Milwaukee REDLINK Intelligence

Overload protection - Prevents tool damage in severe conditions

Temperature control - Keeps the battery within an optimal temperature range

Individual cell control to optimise cell discharge and increase battery life

Protection against excessive battery discharge

Up to 2 times longer runtime, up to 20% more power

Compared with previous Milwaukee battery technology. Results depend on voltage, tool and application

Cell welding integrated into the frame

Separator between cells

Rubber protection against impact and vibration

M12-18FC charger:

The Milwaukee charger charges all M-series lithium batteries of 12V, 14V and 18V and replaces the old 14-18C

Charges all lithium batteries from January 2009 12 and18 volts 1,5-2- 3- 4 and 5 Ah

Operating at 220/240V

Compatible with the entire Milwaukee range 12v 1,5 -2- 3 -4 Ah and 18 1,5-2-3-4 and 5 Ah

Milwaukee magnetic tape measure, Premium range, high-attraction magnet, unsupported standout up to 3,4-4,5 m, 27 mm tape printed on both sides, case reinforced at 5 points. Accuracy class II.

Milwaukee M18 RLOH600-201C rotary laser:

Manual masking shutters

Withstands drops from 1.5 metres

Backlit display in mm and inches

Outdoor rotary laser for maximum levelling results on site

Simple and intuitive interface, single-button setup

Manual masking shutters to prevent laser interference and laser reflection from windows

Designed to withstand the harshest site conditions: IP66 rating, withstands drops of up to 1.5 metres

±5° self-levelling for quick and precise setup

Range of 600 metres (diameter) with the receiver (RD600), optimised for outdoor use

Easy-to-read receiver screen, backlit display in mm and inches on the back and front for clear visibility

Impact alarm with adjustable sensitivity to notify the user if the laser is moved or knocked

Over 40 hours of run time with M18™ 2 Ah battery

The ONE-KEY™ Tracking & Security system offers a free cloud-based tracking and inventory management service, and also provides

Works with all M18™ MILWAUKEE® batteries

Supplied with: 1 18V 2 Ah battery, 1 charger, 1 receiver, 1 case.

Bolt kit for construction site safety Milwaukee
The kit consists of:
- 1 BOLT100 helmet, white, non-vented
- 1 Pair of nitrile gloves CAT. A size 10
- 1 Pack of 10 pairs of disposable ear plugs 38db
- 1 Yellow Contractor hi-vis vest size S/M

The Safety Kit 2.0 personal protection kit from Milwaukee, compliant with European regulations for safety at work and suitable for the essential protection of every professional.

Made up of:

• Hi-vis vest L/XL (4932471890) made of durable, comfortable material, increases visibility in low light conditions, reducing the risk of accidents;
• Cut-resistant gloves category A size 10/XL (4932471418): The gloves offer excellent protection from abrasion and cuts, ensuring maximum dexterity during handling;
• Safety glasses: The anti-scratch and anti-fog lenses offer complete eye protection, whether you work indoors or outdoors;
• Ear plugs with headband (4932478135): reduce exposure to excessive noise, protecting hearing;

Applications: suitable for all steels. Recommended for cutting stainless steel, hardox, cast iron, heat-resistant steel, mild steel.

Features: + 50% longer service life, 50% less cutting time, 50% less dust

48475021

150mm

FANG TIP: for easy plunging into the material in confined areas.

NAIL GUARD : Protects the teeth during use when the blade teeth meet ferrous elements such as nails, bolts, etc. This increases blade life.

Hardness: 1.60 mm blade thickness, ideal for wood with nails and bolts.

Speed: the special blade geometry allows fast material removal and faster cutting.

Angled shape: excellent for plunge cutting and for reaching into confined areas.

Flexibility: bi-metal construction allows the blade to bend and flex without breaking.

48475226

TCT AX 230mm x 5 Tpi - 1 pc

30 times longer lasting than standard bi-metal blades. The carbide teeth provide maximum life in the most demanding applications. Cuts through the toughest screws.

2 times faster. A very aggressive tooth design allows faster cutting in a wide range of building materials (wood / nails / bolts / screws / cast iron / iron roofing / tar roofing).

25% more cuts per charge. Optimised for use with cordless tools.

FANG TIP: for easy plunging into the material in confined areas.

NAIL GUARD : Protects the teeth during use when the blade teeth meet ferrous elements such as nails, bolts, etc. This increases blade life.

Angled shape, excellent for plunge cuts and for reaching into confined areas.

48001077

Blade 3 times sharper for greater speed and more precise cuts.

The teeth are reinforced and three times sharper for an extra-clean cut.

The 1.6 mm thick blade resists bending and reduces vibration.

48005261

TCT TORCH 150mm x 7 Tpi - 1 pc

Carbide-tipped teeth ensure longer life in heavy-duty applications. Up to 50 times longer lasting than bi-metal blades.

Sturdy 1.27 mm thick body for precise straight cuts.

25 mm blade height for greater stability and less vibration.

Ideal for demolition of cast iron and all thick metals.

Tooth geometry optimised for maximum speed and life.

Tooth geometry optimised for maximum speed and life. Bi-metal tooth construction with 8% cobalt further improves performance and service life.

The tang area is reinforced with pressed metal reinforcements, making this blade 2x more resistant to bending than standard construction.

Blade body 0.90 millimetres thick, optimised for maximum speed and flexibility.

Carbide-tipped teeth ensure longer life in heavy-duty applications. Up to 50 times longer lasting than bi-metal blades.

Sturdy 1.27 mm thick body for precise straight cuts.

25 mm blade height for greater stability and less vibration.

Ideal for demolition of cast iron and all thick metals.

Features

Carbide-tipped teeth ensure longer life in heavy-duty applications. Up to 50 times longer lasting than bi-metal blades.

Sturdy 1.27 mm thick body for precise straight cuts.

25 mm blade height for greater stability and less vibration.

Ideal for demolition of cast iron and all thick metals.

Matrix II HSS teeth with 8% cobalt. Hard bi-metal design for fast cutting and maximum blade life. For a wide range of applications.

Large cutting edge with chamfered corners. Ensures lower vibration and optimum drilling performance in reinforced concrete applications. Longer bit life over time.

4 x 90° head geometry. Allows precise holes and excellent drilling performance, even when reinforcement is present.

130° Primary Cutting Edge. The 130° cutting edge angle allows optimum performance in applications where reinforcement is present and excellent hole accuracy.

Secondary Cutting Edge. Robust, to support the primary cutting edge during drilling, for faster drilling.

Short flute for better dust extraction and faster drilling speed, less wear and less heat build-up.

Thicker Primary Cutting Edge with a higher percentage of carbide, and on Ø > 32 mm a further higher percentage of carbide for longer life.

Groove located at the side of the primary cutting edge, which allows the wear of the bit to be checked. Milwaukee guarantees its bit up to 75 m.

Reinforced bit section. This gives lower vibration, fewer breakages and the best transfer of the tool's power to the bit.

Deep flute shoulder. This allows greater and faster dust extraction and less heat build-up on the bit head, and therefore less wear.

Lower Vibration. Comfortable drilling with less stress for the user and for the tool.

Special surface treatment. For easier dust flow along the bit surface and lower friction.

PGM Mark. Guarantees precise, accurate holes and maximum anchor holding strength.

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

4932343734

Ideal for a wide range of applications on concrete.

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

4932478267

Up to 2 times longer life than standard chisels.

Self-sharpening, maximum performance for longer.

Maximum working surface, greater productivity, greater removal.

Ground tip. Sharper, faster and prevents jamming.

Made in Germany.

4932478266

Up to 2 times longer life than standard chisels.

Self-sharpening, maximum performance for longer.

Maximum working surface, greater productivity, greater removal.

Ground tip. Sharper, faster and prevents jamming.

Made in Germany.

4932399234

Ideal for removing plaster and ceramic tiles from walls.

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Max chisel bits offer powerful performance, cutting into concrete and making them the ideal choice for demolition work. SDS-Max SLEDGE™ self-sharpening chisels are available in 10 variants, including point chisels and wide chisels.

Each of these accessories is self-sharpening and designed to last twice as long as standard chisels. They also feature extra-long working lengths for greater material removal. This collection also includes chisels specifically for removal and scraping work. The SDS-Max mortar chisel features carbide teeth designed to easily remove intact bricks and to clean or remove mortar from the joints around windows and door frames.

SDS-Max tile removal chisels are shaped bits that allow plaster and ceramic tiles to be removed quickly and efficiently

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

Large cutting edge with chamfered corners. Ensures lower vibration and optimum drilling performance in reinforced concrete applications. Longer bit life over time.

4 x 90° head geometry. Allows precise holes and excellent drilling performance, even when reinforcement is present.

130° Primary Cutting Edge. The 130° cutting edge angle allows optimum performance in applications where reinforcement is present and excellent hole accuracy.

Secondary Cutting Edge. Robust, to support the primary cutting edge during drilling, for faster drilling.

Short flute for better dust extraction and faster drilling speed, less wear and less heat build-up.

Thicker Primary Cutting Edge with a higher percentage of carbide, and on Ø > 32 mm a further higher percentage of carbide for longer life.

Groove located at the side of the primary cutting edge, which allows the wear of the bit to be checked. Milwaukee guarantees its bit up to 75 m.

Reinforced bit section. This gives lower vibration, fewer breakages and the best transfer of the tool's power to the bit.

Deep flute shoulder. This allows greater and faster dust extraction and less heat build-up on the bit head, and therefore less wear.

Lower Vibration. Comfortable drilling with less stress for the user and for the tool.

Special surface treatment. For easier dust flow along the bit surface and lower friction.

PGM Mark. Guarantees precise, accurate holes and maximum anchor holding strength.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

MILWAUKEE® SDS-Plus chisel bits make it easier to break tough materials such as concrete, stone and brick. Each bit in the range is designed to suit different applications, offering powerful performance and precise results.

For work at height or in confined spaces, SDS-Plus narrow flat chisels and SDS-Plus narrow point chisels are compatible with cordless tools, allowing easy access to tight areas without the need for a cable connection.

Specific tasks such as removing tough materials are handled easily thanks to dedicated bits such as SDS-Plus tile removal chisels, which have an angled head that prevents damage to walls during removal.

SHOCKWAVE™ IMPACT DUTY steel (chromium-molybdenum) is a high-quality steel alloy offering maximum strength and durability.

Laser-etched diameter filled with white ink for easy reading and maximum long-lasting durability.

Pin retention for maximum socket hold.

Through-hole design and groove to accommodate a safety accessory.

Milwaukee SG27P PRO+ flap disc for angle grinder, for grinding and deburring metals.

SHOCKWAVE™ step drill bits have been studied and designed for use on impact drivers. The 1/4" hex shank with SHOCKZONE™ ensures maximum durability and avoids premature breakage of the drive end.

Aluminium titanium nitride coating for up to 5 times longer life.

Double spiral flute: optimised for impact drivers.

RAPID STRIKE TIP™: centring point for better centring, without the need to drill a pilot hole.

Laser-engraved diameters for better visibility, even in the long term.

48899265

SHOCKWAVE™ step drill bits are designed and engineered for use on impact drivers. The 1/4" hex shank with SHOCKZONE™ ensures maximum durability and prevents premature breakage of the connection.

Aluminium titanium nitride coating for up to 5 times longer life.

Double spiral flute: optimised for impact drivers.

RAPID STRIKE TIP™: centring point for better centring, with no need for a pilot hole.

Laser-etched diameters for better visibility, even in the long term.

Milwaukee magnetic level, Slim series, milled aluminium frame up to 120 cm, 2 acrylic vials, certified accuracy 0,029° (0.5 mm/m). Non-slip grip and shock-absorbing rubber end caps.

• Metric scale
• Receiver bracket
• Metric scale up to 2.4 metres with integrated receiver bracket for quick positioning of the receiver
• Tough aluminium frame to withstand site conditions
• Strong latches to prevent damage to the frame
• Adjustable levelling vial for more precise setup
• Length 135 cm when closed

Milwaukee 48899320 - Step drill bit 4 - 20 MM

Centring point for better centring, with no need for a pilot hole.

The tip geometry allows extremely precise drilling without leaving burrs and avoiding skipping that could damage the material.

Optimised 2-flute geometry with a very sharp edge that makes it up to 2 times faster.

Made from custom-engineered steel with a black obsidian coating for longer life, up to 4 times longer than conventional step drill bits.

48899340

Suitable for drilling the following materials :

Ferrous and non-ferrous sheet metal

Profiles and tubes

Copper, brass and aluminium

Stainless steel

Plastic

Panels and junction boxes

In plumbing , access holes for pipes and installations

Maximum material thickness 4 mm

Shank diameter (mm) 10

Length (mm) 90

No. of steps 17

Material : Custom-engineered steel with a black obsidian coating

STEP DRILL BIT UP TO 28.3 MM:

Step drill bits are ideal for drilling the following materials: - Ferrous and non-ferrous sheet metal, profiles and tubes. - Copper, brass and aluminium. - Steel

Electricians: drilling of panels and boxes for the installation of cable glands. - Plumbing / HVAC: access holes for pipes and installations

The main advantages over drilling with conventional drill bits are: with one step drill bit you can drill several sizes - Better for enlarging holes

Surface countersinking, drilling and deburring all in a single operation.

Centring point for better centring, with no need for a pilot hole.

The tip geometry allows extremely precise drilling without leaving burrs and avoiding skipping.

Optimised 2-flute geometry with a very sharp edge that makes it up to 2 times faster.

Made from custom-engineered steel with a black obsidian coating for longer life, up to 4 times longer.

Optimised for use with the high speeds of cordless tools.

Laser-etched diameters for better visibility, even in the long term.

Deburrs automatically.

Maximum shank grip in the chuck to ensure maximum torque transmission.

No. of steps 9

steps 6- 9- 12,5 pg7- 15,2 pg9 - 18,6 pg11- 20,4pg 13,5- 22,5 pg16 -25,5- 28,3 pg21

Shank diameter (mm) 10

Overall length (mm) 68

Product code 48899321

Pack quantity 1